Lintel replacement · Tenby
Lintel replacement in Tenby
Lintel replacement in Tenby, from free survey to completion certificate.
- Itemised written quote
- Beam sized by a structural engineer
- Covering Tenby and nearby
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Lintel replacement in Tenby: how it works
We carry out lintel replacement in Tenby, covering the SA69 and SA70 postcode districts. Our coverage runs across Pembrokeshire, so nearby villages are included too. The job starts with a free survey visit so the engineer's calculations are based on your actual walls, floors and loads.
We survey the opening, arrange the engineer's specification and building control, prop the wall, swap the lintel and rebuild the masonry and plaster around it. Your quote is written and itemised, and it covers matching the bricks and mortar as closely as the existing wall allows.
What to expect
- Many Victorian and Edwardian houses have a timber lintel hidden behind a decorative brick arch or on the inner face of the wall. Damp from leaking gutters or failed pointing can rot it unseen until the brickwork above starts to drop.
- The replacement is specified by a structural engineer, who looks at the opening width, the wall construction and what the lintel carries, such as floor joists, a bay roof or a gable. Solid walls and cavity walls usually call for different lintel types.
- A typical single lintel takes a day or two on site. Keep the building control completion certificate with your property papers, because buyers' surveyors often notice old cracking around openings and their solicitors will ask what was done about it.
- Older steel lintels and bare steel angles can corrode where water sits on them. Rust takes up more room than the steel it comes from, so a corroding lintel can lift the brick course above it and open up horizontal cracks.
- Diagonal cracks that start at the top corners of a window and step up through the mortar joints are a classic sign of a lintel problem. Movement elsewhere in a house can cause similar cracks, so the cause is confirmed on site before anything is replaced.
From survey to sign-off in Tenby
Survey in Tenby
We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.
Engineer's design
A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.
Building control
We submit the application or notice to Pembrokeshire County Council under the Building Regulations as they apply in Wales, before work starts.
Install and sign-off
Props go in, the opening is formed, the steel is set and packed, building control inspects it, and we make good.
How much should I budget in Tenby?
As a guide, budget £360–£1,090 per lintel including VAT for lintel replacement in Tenby, based on published UK cost guides adjusted for prices in Wales (-9%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Lintel replacement | £360–£1,090 per lintel | Propping, removing the old lintel, new lintel set on beds and brickwork made good |
| Rear wall opening for bi-fold or sliding doors | £2,300–£6,350 | External wall opened up to about 5 m with steel, propping, cavity tray and making good (doors supplied separately) |
| Structural calculations for a beam | £230–£680 | Site measure or photos, beam and padstone design and calculations for building control |
| Steel beam replacement | £1,800–£5,000 | Propping, removing the failed beam, new steel on proper bearings, approval and making good |
Figures include our approximate regional adjustment for prices in Wales (-9%) and are rounded. How these figures are worked out.
Approvals in Tenby
Removing a load-bearing wall in Wales needs approval under the Welsh building regulations before work starts. For Tenby the application goes to Pembrokeshire County Council or a registered building control approver, with the engineer's calculations, and a completion certificate follows the final inspection.
Where the steel bears into a wall shared with next door, notice must be served under the Party Wall etc. Act 1996. If your neighbour dissents, surveyors agree how the work is done before it starts.
Lintel replacement near Tenby
- Pembroke 9.1 mi
- Pembroke Dock 10.5 mi
- Haverfordwest 14.5 mi
- Milford Haven 14.8 mi
- Burry Port 19.6 mi
- Carmarthen 21.2 mi
Questions about lintel replacement in Tenby
How soon can lintel replacement start in Tenby?
Start dates depend on the engineer's calculations, the building control approval and, where needed, party wall notice periods. We give you a realistic timetable after the survey and keep you updated as each approval comes through.
What happens at the survey visit in Tenby?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.
Will the new brickwork match the old?
We aim for a close match by reusing the original bricks wherever they come out cleanly and sourcing reclaimed or similar bricks for any shortfall. Mortar colour and type are chosen to suit the existing wall. New work can look slightly fresher at first and tends to weather in over time.
Is a cracked lintel dangerous?
It can become a problem if left, because the masonry above loses support and cracks tend to widen as it settles. Failure is usually gradual, but if bricks are loose, a frame is distorting or cracks are growing quickly, have it checked promptly and keep people clear of the area.
Why is my concrete lintel cracking and flaking?
Usually because the steel reinforcement inside has rusted. Rust takes up more space than steel, so it pushes the concrete cover off, exposing more steel to damp and speeding up the damage. An engineer checks whether the lintel can still do its job, but in many cases replacement is the sensible fix.
Do you also work near Tenby?
Yes. We also cover nearby towns including Pembroke, Pembroke Dock, Haverfordwest and Milford Haven.