Structural calculations · Tenby
Structural calculations in Tenby
Structural calculations for homes in SA69, SA70, designed by a structural engineer.
- Price fixed in writing once scope is agreed
- Building control arranged
- Temporary works and making good included
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
About our structural calculations service in Tenby
We carry out structural calculations in Tenby, covering the SA69 and SA70 postcode districts. The wider Pembrokeshire area is covered as well. The job starts with a free survey visit so the engineer's calculations are based on your actual walls, floors and loads.
We arrange the calculations as part of every structural job, or work to calculations you already have if they match the design. The engineer's output goes to building control with the application, and the same figures guide the steel order, the padstones and the propping on site.
What to expect
- Older buildings take more judgement. Lime mortar, rubble-filled walls, timber bressummers and shallow footings all affect how loads are carried, so engineers working on period properties often allow for weaker materials or ask for more investigation.
- The beam ends are designed as carefully as the beam. Calculations check that the masonry under each end can take the concentrated load, and specify a padstone, spreader or column where it cannot. Weak brickwork beneath a bearing is a common reason for design changes.
- How long calculations take depends on the engineer's workload and how complicated the job is. A single beam is quicker to design than a loft conversion with several steels, and any opening up needed for investigation adds time before figures can be issued.
- A typical calculation pack covers the loads assumed, the beam section chosen, checks for bending, shear and deflection, the bearing and padstone design, and any column or foundation design. It is usually accompanied by a drawing or sketch showing positions.
- Opening up can reveal things no survey could see, such as a hidden chimney flue, joists running the other way or a wall with no footing. When that happens, the engineer revises the design before work continues, and any change is priced before it goes ahead.
What happens, step by step
Look and measure
We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.
Design and price
Calculations come back from the engineer and we confirm your fixed written price, line by line.
Building control
We submit the application or notice to Pembrokeshire County Council under the Building Regulations as they apply in Wales, before work starts.
Fit, inspect, finish
The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.
What do structural calculations cost in Tenby?
As a guide, budget £230–£680 including VAT for structural calculations for a beam in Tenby, based on published UK cost guides adjusted for prices in Wales (-9%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Structural calculations for a beam | £230–£680 | Site measure or photos, beam and padstone design and calculations for building control |
| Building control fees | £230–£590 | Application fee and inspections under the Welsh building regulations; varies by council or approver |
| Steel beam replacement | £1,800–£5,000 | Propping, removing the failed beam, new steel on proper bearings, approval and making good |
| Temporary works and propping | £140–£460 | Props, spreaders, needles and sole plates for a typical opening, installed and struck |
Figures include our approximate regional adjustment for prices in Wales (-9%) and are rounded. How these figures are worked out.
Approvals in Tenby
Welsh building regulations treat beams and new openings as controlled building work. We apply to Pembrokeshire County Council on your behalf before anything is removed, give the commencement notice the 2026 Welsh rules require, and the steel is checked before it is boxed in.
The Party Wall etc. Act 1996 applies in Wales as well as England, so a beam bearing into a shared wall needs a party structure notice at least two months before work starts. We arrange notices through a party wall surveyor.
Structural calculations near Tenby
- Pembroke 9.1 mi
- Pembroke Dock 10.5 mi
- Haverfordwest 14.5 mi
- Milford Haven 14.8 mi
- Burry Port 19.6 mi
- Carmarthen 21.2 mi
Local questions answered
Do I need a party wall agreement for structural calculations in Tenby?
Yes, if the beam bears into a shared wall: the Party Wall etc. Act 1996 applies in England and Wales, and a party structure notice must be served at least two months before that work starts. We arrange it through a party wall surveyor.
Can I stay at home while the work is done in Tenby?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.
What happens if building control questions the calculations?
The engineer answers the query, usually by providing extra checks, clarifying an assumption or adjusting the design. This is a normal part of the approval process and does not mean anything is wrong. Work on the affected element waits until building control is satisfied, and any design change that affects cost is priced before it goes ahead.
Do structural calculations tell you which beam to buy?
Yes. The calculations specify the steel section, its grade and length, and the padstones or columns it needs, so the fabricator can supply exactly what was designed. Substituting a different beam on site without the engineer's agreement would leave the work out of line with the approved design.
What is a load take-down?
A load take-down is the part of the calculations that adds up every load reaching a beam or column and follows it down to the ground. It includes the roof, floors, walls, people, furniture and, where relevant, snow and wind. Each element along that path is then checked to make sure it can carry its share.