Steel beam replacement & repair · London
Steel beam replacement & repair in London
Survey, engineer's design and installation of steel beam replacement & repair anywhere in London.
- Itemised written quote
- Beam sized by a structural engineer
- Covering London and nearby
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
What steel beam replacement & repair involves in London
Steel beam replacement and repair means dealing with an existing beam that is corroded, sagging, undersized or poorly supported. A structural engineer inspects it and decides whether it can be repaired, strengthened with welded or bolted plates, given new bearings, or must be taken out and replaced, with the structure propped throughout.
Looking for steel beam replacement & repair in London? Towns we cover include Tottenham, Westminster and Ilford, among other places in the area. Our teams handle the calculations, the building control approval, the propping and the steel itself, and leave the opening ready for plastering and decoration.
Things to plan for
- Replacing a beam that is already carrying load is more delicate than fitting a new one. Props go in on both sides before anything is cut, with spreaders above and below, and the old steel is often cut into sections to lift it out safely.
- Repairs are usually more contained than a new opening because the room layout stays the same. The main disruption is stripping the boxing, propping the floor above and the dust from cutting steel, with the ceiling and walls around the beam replastered afterwards.
- The full scope is sometimes clear only once the steel is exposed. We price the inspection and opening up first where needed, then provide an itemised quote for the repair the engineer specifies, so you are not committing to work before the problem is understood.
- Many problem beams are not faulty steel at all but poor bearings. Ends resting on loose brick, timber offcuts or no padstone can crush the masonry beneath, and the beam then drops slightly and cracks the finishes above.
- A proper assessment means opening the boxing at the ends and along the span so the engineer can see the steel. In buildings from before 2000, old boxing can contain asbestos insulating board, so it is checked before anyone cuts into it.
From survey to sign-off in London
Survey in London
We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.
Engineer's design
A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Install and sign-off
Props go in, the opening is formed, the steel is set and packed, building control inspects it, and we make good.
Guide prices for steel beam replacement & repair in London
As a guide, budget £2,550–£7,050 including VAT for steel beam replacement in London, based on published UK cost guides adjusted for London prices (+28%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Steel beam replacement | £2,550–£7,050 | Propping, removing the failed beam, new steel on proper bearings, approval and making good |
| Fire protection to a steel beam | £190–£770 per beam | Fire-rated board boxing or an intumescent coating system as specified |
| Shop or commercial structural opening | £6,400–£19,200 | Transfer beam and columns for opening units together or forming a shopfront opening |
| Structural calculations for a beam | £320–£960 | Site measure or photos, beam and padstone design and calculations for building control |
Figures include our approximate regional adjustment for London prices (+28%) and are rounded. How these figures are worked out.
Approvals in London
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Steel beam replacement & repair by town
- Brent
- Islington
- Westminster
- Bexley
- Barking
- Archway
- Sutton
- Croydon
- Ilford
- Enfield Town
- Harrow
- Tottenham
- Walthamstow
- Dagenham
- Becontree
- Romford
- Hayes
- Wembley
- Fulham
- Edmonton
- Southall
- Putney
- Battersea
- Purley
- Peckham
- Chingford
- Uxbridge
- Wimbledon
- Stamford Hill
- Brixton
- Hounslow
- Finchley
- Cricklewood
- Mitcham
- Feltham
- Acton
- Beckenham
- Chelsea
- Streatham
- South Croydon
Steel beam replacement & repair in London: your questions
Do you cover London for steel beam replacement & repair?
Yes. We carry out steel beam replacement & repair in London. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.
How much does steel beam replacement & repair cost in London?
As a guide, budget £2,550–£7,050 including VAT for steel beam replacement in London, based on published UK cost guides adjusted for London prices (+28%). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.
What does it mean to plate a steel beam?
Plating means fixing extra steel plates to the beam, usually along the flanges, to increase its strength or stiffness without taking it out. The plates are bolted or welded according to the engineer's design. It suits some beams well, but not all, and the engineer checks the connections and bearings before specifying it.
How long does it take to replace a steel beam?
Anything from a day or two to around a week on site, depending on what the engineer specifies. Rebuilding a crushed bearing can be quick, while cutting out an old beam and fitting a new one in a typical room takes longer. Plastering and redecoration follow once building control has inspected the new steel.
Can a rusty steel beam be repaired?
Often, yes. Surface rust can usually be cleaned back to sound steel and treated with a protective coating. Where corrosion has eaten into the flanges or web, the engineer works out the remaining strength and decides whether plating will restore it or the beam needs replacing. The source of the moisture must be fixed as well.
Why has my steel beam sagged?
A beam usually sags because it is too small for the load, the load has increased since it was fitted, or its bearings have crushed or moved. Every beam bends slightly within design limits, but a visible dip or new cracking suggests something has changed. An engineer can measure it and identify the cause.
What happens at the survey visit in London?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.