Lintel replacement · Hitchin
Lintel replacement in Hitchin
Lintel replacement for homes in SG4, SG5, designed by a structural engineer.
- Survey, design and installation in one
- Covering SG4, SG5
- Inspected before it is covered
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
About our lintel replacement service in Hitchin
We cover lintel replacement in Hitchin (SG4, SG5) and the streets around it. We also work in nearby Luton, roughly 7.4 miles away. Each job is designed by a structural engineer and approved through local building control before work begins.
A lintel is the short beam that carries the brickwork over a window or door. When it fails, the signs tend to show outside first: a crack stepping up from the corner of the frame, a dip in the brick courses, or a window that has started to bind. Timber, concrete and old steel lintels each fail in their own way, but the fix follows the same principle.
Worth knowing before you start
- A typical single lintel takes a day or two on site. Keep the building control completion certificate with your property papers, because buyers' surveyors often notice old cracking around openings and their solicitors will ask what was done about it.
- Replacing a structural lintel is generally treated as building work, so approval is in place before it starts. In England, Wales and Northern Ireland that means building control, and in Scotland a building warrant is needed before structural work begins.
- Bricks taken down are cleaned and reused where possible, and any shortfall is made up with reclaimed or close-matching bricks. Mortar is mixed to suit the colour and strength of the existing wall, which in older homes often means a lime mortar.
- Many Victorian and Edwardian houses have a timber lintel hidden behind a decorative brick arch or on the inner face of the wall. Damp from leaking gutters or failed pointing can rot it unseen until the brickwork above starts to drop.
- While the old lintel is out, the brickwork above sits on adjustable steel props with needles or masonry prop heads fixed through the mortar joints. The props stand on boards or spreaders so their load is shared across the ground or floor beneath.
From survey to sign-off in Hitchin
Look and measure
We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.
Design and price
Calculations come back from the engineer and we confirm your fixed written price, line by line.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Fit, inspect, finish
The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.
What does lintel replacement cost in Hitchin?
As a guide, budget £420–£1,270 per lintel including VAT for lintel replacement in Hitchin, based on published UK cost guides adjusted for prices in the East of England (+6%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Lintel replacement | £420–£1,270 per lintel | Propping, removing the old lintel, new lintel set on beds and brickwork made good |
| Steel beam replacement | £2,100–£5,850 | Propping, removing the failed beam, new steel on proper bearings, approval and making good |
| Temporary works and propping | £160–£530 | Props, spreaders, needles and sole plates for a typical opening, installed and struck |
| Plastering and making good | £320–£1,270 | Boxing the beam, bead and skim, reveals, floor infill where the wall stood and tidy-up |
Figures include our approximate regional adjustment for prices in the East of England (+6%) and are rounded. How these figures are worked out.
Approvals in Hitchin
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Lintel replacement near Hitchin
- Letchworth Garden City 3.2 mi
- Stevenage 4.8 mi
- Luton 7.4 mi
- Harpenden 9.7 mi
- Ampthill 10.5 mi
- Welwyn Garden City 10.7 mi
Questions about lintel replacement in Hitchin
Can I stay at home while the work is done in Hitchin?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.
Can you work on older or listed homes in Hitchin?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.
How long does lintel replacement take?
Most single openings take one to two working days on site, covering propping, removing the old lintel, fitting the new one and rebuilding the brickwork. Upper-floor lintels needing scaffolding, wide bay windows, and jobs where bricks must be sourced to match can all take longer.
Why is my concrete lintel cracking and flaking?
Usually because the steel reinforcement inside has rusted. Rust takes up more space than steel, so it pushes the concrete cover off, exposing more steel to damp and speeding up the damage. An engineer checks whether the lintel can still do its job, but in many cases replacement is the sensible fix.
Do I need scaffolding to replace a lintel?
For ground-floor windows and doors, usually not, as props and a stable platform from the ground are enough. First-floor and higher openings normally need scaffolding or a tower so the brickwork can be rebuilt safely, and that cost appears as its own line in the quote.