Lintel replacement · Hertfordshire
Lintel replacement in Hertfordshire
Calculations, approvals, propping, steel and making good for lintel replacement across Hertfordshire.
- Price fixed in writing once scope is agreed
- Building control arranged
- Temporary works and making good included
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Planning lintel replacement in Hertfordshire
Lintel replacement is the removal of a failed beam above a window, door or other opening and its replacement with a new lintel specified by a structural engineer. The masonry above is held on temporary supports while the old lintel comes out, the new one is bedded level on sound bearings, and the brickwork and plaster around it are rebuilt and made good.
If you are planning lintel replacement in Hertfordshire, the order of work matters as much as the steel: survey, calculations, approval, propping, installation, inspection and making good. We can survey in places such as Hitchin, Bishops Stortford and Cheshunt and the villages around them. We run that sequence for you as one job with one point of contact.
Things to plan for
- Bricks taken down are cleaned and reused where possible, and any shortfall is made up with reclaimed or close-matching bricks. Mortar is mixed to suit the colour and strength of the existing wall, which in older homes often means a lime mortar.
- Bay windows often rely on a timber beam, sometimes called a bressummer, across the front of the bay. When it rots, the bay roof and the brickwork over it can drop, and the engineer may specify a steel replacement instead.
- Older steel lintels and bare steel angles can corrode where water sits on them. Rust takes up more room than the steel it comes from, so a corroding lintel can lift the brick course above it and open up horizontal cracks.
- Cables for outside lights, burglar alarms and doorbells often run just above window and door heads. These are noted at the survey and made safe by an electrician before the brickwork is opened up, then reinstated afterwards.
- Diagonal cracks that start at the top corners of a window and step up through the mortar joints are a classic sign of a lintel problem. Movement elsewhere in a house can cause similar cracks, so the cause is confirmed on site before anything is replaced.
Four stages, one team
Survey in Hertfordshire
We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.
Engineer's design
A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Install and sign-off
Props go in, the opening is formed, the steel is set and packed, building control inspects it, and we make good.
What does lintel replacement cost in Hertfordshire?
As a guide, budget £420–£1,270 per lintel including VAT for lintel replacement in Hertfordshire, based on published UK cost guides adjusted for prices in the East of England (+6%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Lintel replacement | £420–£1,270 per lintel | Propping, removing the old lintel, new lintel set on beds and brickwork made good |
| Steel beam replacement | £2,100–£5,850 | Propping, removing the failed beam, new steel on proper bearings, approval and making good |
| Structural calculations for a beam | £260–£800 | Site measure or photos, beam and padstone design and calculations for building control |
| Plastering and making good | £320–£1,270 | Boxing the beam, bead and skim, reveals, floor infill where the wall stood and tidy-up |
Figures include our approximate regional adjustment for prices in the East of England (+6%) and are rounded. How these figures are worked out.
Approvals in Hertfordshire
Structural openings in English homes need building regulations approval before work starts. The local council's building control team can deal with it, or you can use a registered building control approver. Either way the steel is inspected before it is covered, and a completion certificate is issued at the end. Keep it safe for when you sell.
Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.
Questions about lintel replacement in Hertfordshire
Which towns in Hertfordshire do you cover?
We cover towns including Watford, Hemel Hempstead, Stevenage and St Albans, plus the villages and smaller towns around them.
How much does lintel replacement cost in Hertfordshire?
As a guide, budget £420–£1,270 per lintel including VAT for lintel replacement in Hertfordshire, based on published UK cost guides adjusted for prices in the East of England (+6%). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.
Why is my concrete lintel cracking and flaking?
Usually because the steel reinforcement inside has rusted. Rust takes up more space than steel, so it pushes the concrete cover off, exposing more steel to damp and speeding up the damage. An engineer checks whether the lintel can still do its job, but in many cases replacement is the sensible fix.
Can a timber lintel in an old house be replaced with steel or concrete?
Yes, where the engineer is satisfied it suits the wall. Timber lintels in older solid-walled homes are often swapped for a steel or concrete alternative that will not rot. The engineer considers how the wall is built, and where lime mortar is present the rebuild uses a compatible mortar.
Will the new brickwork match the old?
We aim for a close match by reusing the original bricks wherever they come out cleanly and sourcing reclaimed or similar bricks for any shortfall. Mortar colour and type are chosen to suit the existing wall. New work can look slightly fresher at first and tends to weather in over time.
What type of lintel will be fitted?
The engineer decides, based on the opening width, the wall construction and the load above. Steel lintels are common in cavity walls, while solid walls or wide openings may suit a different type or a steel section. We fit what the specification calls for rather than a one-size option.
Can you work on older or listed homes in Hertfordshire?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.