Flat & HMO conversion steels · Faversham
Flat & HMO conversion steels in Faversham
Steelwork, approvals and making good for flat & HMO conversion steels in Faversham and nearby.
- Price fixed in writing once scope is agreed
- Building control arranged
- Temporary works and making good included
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
What flat & HMO conversion steels involve in Faversham
We carry out flat & HMO conversion steels in Faversham, covering the ME13 postcode district. We also cover the surrounding towns and villages in Kent. The job starts with a free survey visit so the engineer's calculations are based on your actual walls, floors and loads.
We supply and install steelwork for landlords, developers and their builders, working from the engineer's design and fitting in with the wider conversion. We arrange structural calculations, handle building control for the structural work or feed into your existing application, and fire protect the steel to the period the scheme requires.
Worth knowing before you start
- Steelwork is usually one of the first structural stages in a conversion. Getting beams in, inspected and fire protected early lets partitions, services and separating construction follow on, so any delay to the steel tends to hold up every trade after it.
- Separating floors and walls also have to meet sound insulation standards. Steel connections and boxing are detailed so they do not leave gaps or rigid paths for noise, and sound testing near completion checks that the separating construction performs.
- Many HMOs need a licence from the local council, with conditions covering room sizes, shared facilities and fire safety. Licensing runs alongside building regulations rather than replacing them, so the layout and steelwork should suit both from the outset.
- Conversions add kitchens and bathrooms upstairs, so soil pipes, water supplies and extract ducts need routes through the structure. Steel and joist positions are coordinated with these runs, and steel should never be drilled or notched on site without the engineer's approval.
- The reduced 5% rate of VAT may apply to some conversion work, such as changing the number of dwellings in a building. Whether it applies depends on the details of the scheme, so confirm the position with your accountant before relying on it.
What happens, step by step
Free visit
A short visit to Faversham to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
Guide prices for flat & HMO conversion steels in Faversham
As a guide, budget £2,800–£10,100 including VAT for steelwork for a flat or HMO conversion in Faversham, based on published UK cost guides adjusted for prices in the South East (+12%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Steelwork for a flat or HMO conversion | £2,800–£10,100 | Beams and posts for a revised layout, with approvals; fire and sound separation priced with the conversion |
| Steel column or post | £560–£1,680 per column | Column supplied and fitted with base and cap plates on a pad foundation |
| Load-bearing wall removal with steel beam | £2,250–£5,600 | Typical internal wall up to about 4 m: calculations, building control, propping, steel, padstones, fitting, fire protection and making good |
| Structural calculations for a beam | £280–£840 | Site measure or photos, beam and padstone design and calculations for building control |
Figures include our approximate regional adjustment for prices in the South East (+12%) and are rounded. How these figures are worked out.
Building rules for Faversham
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Flat & HMO conversion steels near Faversham
- Whitstable 6.7 mi
- Sittingbourne 7.0 mi
- Canterbury 8.6 mi
- Herne Bay 11.1 mi
- Ashford 11.6 mi
- Gillingham 15.5 mi
Questions about flat & HMO conversion steels in Faversham
Do I need a party wall agreement for flat & HMO conversion steels in Faversham?
Yes, if the beam bears into a shared wall: the Party Wall etc. Act 1996 applies in England and Wales, and a party structure notice must be served at least two months before that work starts. We arrange it through a party wall surveyor.
What happens at the survey visit in Faversham?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.
Do I need planning permission to convert a house into an HMO?
You may, depending on the size of the HMO, where it is and any local restrictions. In some areas smaller HMOs can be formed without a planning application, while larger ones, and conversions into self-contained flats, usually need permission. Check with the local planning authority before committing to a layout and its steelwork.
Do I need building regulations to convert a house into flats?
Yes. Converting a house into flats is a material change of use, so the building has to meet requirements for fire safety, sound insulation, structure and other matters. In England and Wales that means a building control application, in Scotland a building warrant before work starts, and in Northern Ireland an application to council building control.
Does steel in a flat conversion need fire protection?
Yes, in almost all cases. Steel holding up floors that separate flats, or supporting escape routes, needs fire resistance to the period the scheme requires, which can be higher than in a single house. It is usually boxed with fire-rated board or coated with intumescent paint, and building control inspects it before handover.
Do you also work near Faversham?
Yes. We also cover nearby towns including Whitstable, Sittingbourne, Canterbury and Herne Bay.