Flat & HMO conversion steels · Kent
Flat & HMO conversion steels in Kent
Flat & HMO conversion steels across Kent, designed by a structural engineer and signed off by building control.
- Survey, design and installation in one
- Covering BR8, CT1, CT10, CT11
- Inspected before it is covered
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
What flat & HMO conversion steels involve in Kent
Flat and HMO conversion steels are the beams, columns and frames needed when a house or building is reworked into self-contained flats or a house in multiple occupation. New layouts move walls, stairs and bathrooms, so steel picks up the loads that old walls used to carry, designed to work alongside the fire separation and sound insulation the conversion also needs.
From the first survey visit to the completion certificate, we take care of flat & HMO conversion steels across Kent. We can survey in places such as Ashford, Sittingbourne and Gravesend and the villages around them. The engineer sizes the steel, we deal with building control, and our team fits and packs the beam before making good.
Key points for your project
- The reduced 5% rate of VAT may apply to some conversion work, such as changing the number of dwellings in a building. Whether it applies depends on the details of the scheme, so confirm the position with your accountant before relying on it.
- In a conversion, walls that carried load are often taken out to form open kitchens or wider corridors, while new partitions go in elsewhere. Each change is checked, because a new stud wall standing on old joists can add load the floor was never designed for.
- Many HMOs need a licence from the local council, with conditions covering room sizes, shared facilities and fire safety. Licensing runs alongside building regulations rather than replacing them, so the layout and steelwork should suit both from the outset.
- Keep the structural calculations, building control completion certificate and fire protection records together in one place. They are needed for signing off the conversion, and buyers, lenders and licensing officers may ask to see them later.
- Where the building is leasehold, or an existing flat is being altered, the freeholder's written consent is normally needed for structural changes. Lenders may also want to see building control sign-off before releasing funds on a converted property.
From survey to sign-off in Kent
Look and measure
We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.
Design and price
Calculations come back from the engineer and we confirm your fixed written price, line by line.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Fit, inspect, finish
The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.
How much should I budget in Kent?
As a guide, budget £2,800–£10,100 including VAT for steelwork for a flat or HMO conversion in Kent, based on published UK cost guides adjusted for prices in the South East (+12%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Steelwork for a flat or HMO conversion | £2,800–£10,100 | Beams and posts for a revised layout, with approvals; fire and sound separation priced with the conversion |
| Building control fees | £280–£730 | Building notice or full plans fee and inspections; varies by council or approver |
| Fire protection to a steel beam | £170–£670 per beam | Fire-rated board boxing or an intumescent coating system as specified |
| Steel column or post | £560–£1,680 per column | Column supplied and fitted with base and cap plates on a pad foundation |
Figures include our approximate regional adjustment for prices in the South East (+12%) and are rounded. How these figures are worked out.
Approvals in Kent
Structural openings in English homes need building regulations approval before work starts. The local council's building control team can deal with it, or you can use a registered building control approver. Either way the steel is inspected before it is covered, and a completion certificate is issued at the end. Keep it safe for when you sell.
Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.
Questions about flat & HMO conversion steels in Kent
Can you work on older or listed homes in Kent?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.
Which towns in Kent do you cover?
We cover towns including St Peters, Maidstone, Gillingham and Chatham, plus the villages and smaller towns around them.
Do I need planning permission to convert a house into an HMO?
You may, depending on the size of the HMO, where it is and any local restrictions. In some areas smaller HMOs can be formed without a planning application, while larger ones, and conversions into self-contained flats, usually need permission. Check with the local planning authority before committing to a layout and its steelwork.
Can you install the steel while my main contractor runs the conversion?
Yes. On many conversions the steelwork is installed as a package within a wider build, working to the main contractor's programme and the engineer's design. We coordinate propping, deliveries and building control inspections for the steel so the other trades can follow on smoothly once it is in.
Do I need an HMO licence before converting a house?
Possibly. Many HMOs need a licence from the local council, and some areas license smaller HMOs too. Licensing covers room sizes, amenities and fire safety, and it is separate from planning and building regulations. Check the council's requirements early, as they can affect the layout and therefore the steelwork needed.
How long does the steelwork take on a house-to-flats conversion?
Typically one to three weeks on site, depending on how many walls move and how the work is phased. The steel is usually among the first structural stages, so it is programmed early to let partitions, services and fire separation follow. The full conversion takes considerably longer than the steelwork alone.