Flat & HMO conversion steels · Gillingham
Flat & HMO conversion steels in Gillingham
Steelwork, approvals and making good for flat & HMO conversion steels in Gillingham and nearby.
- Survey, design and installation in one
- Covering ME1, ME2, ME3
- Inspected before it is covered
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Planning flat & HMO conversion steels in Gillingham
Planning flat & HMO conversion steels in Gillingham? Our team covers ME1, ME2, ME3, ME4 and ME5 and the streets around them. The wider Kent area is covered as well. You get one written quote for the calculations, approvals, propping, steel and making good.
We supply and install steelwork for landlords, developers and their builders, working from the engineer's design and fitting in with the wider conversion. We arrange structural calculations, handle building control for the structural work or feed into your existing application, and fire protect the steel to the period the scheme requires.
Things to plan for
- Floors and walls between flats must resist the spread of fire, and steel holding up those floors needs protection to match. Where a beam passes through a separating wall or floor, the gaps around it are fire-stopped so the separation stays continuous.
- In a conversion, walls that carried load are often taken out to form open kitchens or wider corridors, while new partitions go in elsewhere. Each change is checked, because a new stud wall standing on old joists can add load the floor was never designed for.
- Many HMOs need a licence from the local council, with conditions covering room sizes, shared facilities and fire safety. Licensing runs alongside building regulations rather than replacing them, so the layout and steelwork should suit both from the outset.
- Converting a house into flats is treated as a material change of use for building regulations purposes, so fire safety, sound insulation and other requirements apply across the building, not just to the structural work. The steelwork forms one part of that wider approval.
- Conversions add kitchens and bathrooms upstairs, so soil pipes, water supplies and extract ducts need routes through the structure. Steel and joist positions are coordinated with these runs, and steel should never be drilled or notched on site without the engineer's approval.
How the job runs in Gillingham
Free visit
A short visit to Gillingham to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building control
We submit a building notice or full plans application to Medway Council, so approval is in place before the wall is touched.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
What do flat & HMO conversion steels cost in Gillingham?
As a guide, budget £2,800–£10,100 including VAT for steelwork for a flat or HMO conversion in Gillingham, based on published UK cost guides adjusted for prices in the South East (+12%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Steelwork for a flat or HMO conversion | £2,800–£10,100 | Beams and posts for a revised layout, with approvals; fire and sound separation priced with the conversion |
| Structural calculations for a beam | £280–£840 | Site measure or photos, beam and padstone design and calculations for building control |
| Steel column or post | £560–£1,680 per column | Column supplied and fitted with base and cap plates on a pad foundation |
| Fire protection to a steel beam | £170–£670 per beam | Fire-rated board boxing or an intumescent coating system as specified |
Figures include our approximate regional adjustment for prices in the South East (+12%) and are rounded. How these figures are worked out.
Building control and neighbours in Gillingham
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either Medway Council or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Questions about flat & HMO conversion steels in Gillingham
What happens at the survey visit in Gillingham?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.
How soon can flat & HMO conversion steels start in Gillingham?
Start dates depend on the engineer's calculations, the building control approval and, where needed, party wall notice periods. We give you a realistic timetable after the survey and keep you updated as each approval comes through.
Does steel in a flat conversion need fire protection?
Yes, in almost all cases. Steel holding up floors that separate flats, or supporting escape routes, needs fire resistance to the period the scheme requires, which can be higher than in a single house. It is usually boxed with fire-rated board or coated with intumescent paint, and building control inspects it before handover.
Can you install the steel while my main contractor runs the conversion?
Yes. On many conversions the steelwork is installed as a package within a wider build, working to the main contractor's programme and the engineer's design. We coordinate propping, deliveries and building control inspections for the steel so the other trades can follow on smoothly once it is in.
Do I need planning permission to convert a house into an HMO?
You may, depending on the size of the HMO, where it is and any local restrictions. In some areas smaller HMOs can be formed without a planning application, while larger ones, and conversions into self-contained flats, usually need permission. Check with the local planning authority before committing to a layout and its steelwork.
Can I stay at home while the work is done in Gillingham?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.