Steel BeamInstallers
Basement conversion with steel beams and a steel column on a concrete floor

Basement & cellar steels · Chichester

Basement & cellar steels in Chichester

Basement & cellar steels for homes in PO18, PO19, designed by a structural engineer.

  • Itemised written quote
  • Beam sized by a structural engineer
  • Covering Chichester and nearby

Free survey in Chichester

Tell us about the basement & cellar steel job in Chichester.

Please enter your name.
Please enter a UK phone number.
Please enter a valid email.
Please enter a UK postcode.
Please tell us a little about the job.
  • Free survey visit
  • Engineer's calculations arranged
  • Building control handled
  • Fixed written price once scope is agreed
  • England, Wales, mainland Scotland & NI

About our basement & cellar steels service in Chichester

Our basement & cellar steels service in Chichester covers everything from the first visit to the completion paperwork. It sits about 13.8 miles from Portsmouth, which we also cover. Postcode districts we cover here include PO18 and PO19.

Turning a cellar into a habitable room, or digging a new basement, nearly always means moving or removing walls that hold up the rest of the house. Steel beams and columns take over that support, often while the existing walls are being deepened by underpinning and the space is protected against water.

Things to plan for

  • Below-ground rooms need a waterproofing design, often a cavity drain membrane, a tanking system or both. Column bases and beam bearings that pass through the waterproofing are detailed so they do not become a route for water.
  • Basements can stay damp even with waterproofing in place, so steel used below ground is protected against corrosion as the engineer specifies. That might mean an upgraded paint system or galvanising, particularly where steel sits close to external walls.
  • Underpinning deepens the existing foundations so walls can go lower, and a specialist carries it out in a strict bay-by-bay sequence. Steelwork has to fit around that sequence, which is why the engineer plans the two together from the start.
  • Getting steel into a basement means lowering it through a lightwell, a stair opening or a temporary hole in the ground floor. Long beams may be designed in bolted sections so they can be handled in tight below-ground spaces.
  • Basement steel frames often rely on columns because there is nowhere else to land the load. Each column sits on its own foundation or a thickened part of the slab, and its position needs agreeing early so it does not end up in the middle of a room.

Four stages, one team

  1. Survey in Chichester

    We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.

  2. Engineer's design

    A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.

  3. Building control

    We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.

  4. Install and sign-off

    Props go in, the opening is formed, the steel is set and packed, building control inspects it, and we make good.

What do basement & cellar steels cost in Chichester?

As a guide, budget £2,800–£7,300 including VAT for basement or cellar steelwork in Chichester, based on published UK cost guides adjusted for prices in the South East (+12%).

JobTypical guide rangeWhat it usually covers
Basement or cellar steelwork£2,800–£7,300Beams and columns with pad foundations under the floor above (excavation and waterproofing extra)
Steel column or post£560–£1,680 per columnColumn supplied and fitted with base and cap plates on a pad foundation
Party wall surveyor (agreed surveyor, per neighbour)£1,000–£2,250 per neighbourSchedule of condition and award where a neighbour dissents; serving notice alone, where the neighbour consents, costs far less (England and Wales only)
Temporary works and propping£170–£560Props, spreaders, needles and sole plates for a typical opening, installed and struck

Figures include our approximate regional adjustment for prices in the South East (+12%) and are rounded. How these figures are worked out.

Approvals in Chichester

In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.

If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.

Building rules in England

Basement & cellar steels near Chichester

Basement & cellar steels in Chichester: your questions

Who approves basement & cellar steels in Chichester?

Structural work in Chichester needs a building notice or full plans application to the local council's building control team or a registered building control approver. We prepare and submit it with the structural engineer's calculations and arrange the inspections, so the completion paperwork follows the job.

Do you also work near Chichester?

Yes. We also cover nearby towns including Bognor Regis, Havant, Littlehampton and Waterlooville.

Will columns be needed in my basement?

Quite often. Below ground there may be no suitable wall to support the end of a beam, so a column carries the load down to a foundation. The position can usually be agreed with you at design stage so the column sits within a wall line, a kitchen island or a storage area.

Do I need a party wall notice for basement work?

In England and Wales usually yes, if you are excavating near a neighbour's foundations within the distances the Party Wall etc. Act 1996 sets, or underpinning a shared wall. Notice periods apply before that work starts. We arrange a party wall surveyor to handle the notices, though we do not give legal advice.

What paperwork will I get for basement steelwork?

You should end up with the engineer's calculations and drawings, the building control completion certificate, the waterproofing details and, where it applied, the party wall paperwork. Keep them together, as surveyors and solicitors usually ask for them when the property is sold or remortgaged.

Can I stay at home while the work is done in Chichester?

Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.

Planning to take a wall out?

Book a free survey visit. You get an itemised written quote covering calculations, building control, steel and making good.