Steel BeamInstallers
Basement conversion with steel beams and a steel column on a concrete floor

Basement & cellar steels · Aldershot

Basement & cellar steels in Aldershot

Basement & cellar steels in Aldershot, from free survey to completion certificate.

  • Survey, design and installation in one
  • Covering GU11, GU14
  • Inspected before it is covered

Free survey in Aldershot

Tell us about the basement & cellar steel job in Aldershot.

Please enter your name.
Please enter a UK phone number.
Please enter a valid email.
Please enter a UK postcode.
Please tell us a little about the job.
  • Free survey visit
  • Engineer's calculations arranged
  • Building control handled
  • Fixed written price once scope is agreed
  • England, Wales, mainland Scotland & NI

Basement & cellar steels in Aldershot: how it works

Need basement & cellar steels in Aldershot? We also work in nearby Woking, roughly 10.1 miles away. We survey the property, arrange the engineer's design, deal with local building control, fit the steel and make good, all under one quote for GU11 and GU14 addresses.

Turning a cellar into a habitable room, or digging a new basement, nearly always means moving or removing walls that hold up the rest of the house. Steel beams and columns take over that support, often while the existing walls are being deepened by underpinning and the space is protected against water.

Worth knowing before you start

  • Basements can stay damp even with waterproofing in place, so steel used below ground is protected against corrosion as the engineer specifies. That might mean an upgraded paint system or galvanising, particularly where steel sits close to external walls.
  • Temporary works for basements are more involved than for a single opening. The design covers propping the house above, supporting the sides of the excavation, and keeping loads off freshly cast concrete until it has gained strength.
  • Headroom is precious below ground, and a deep downstand beam can make a room feel cramped. The engineer may use a shallower but heavier section or set the steel into the ground floor zone, and that choice is made at design stage.
  • In terraced and semi-detached homes, basement work nearly always affects shared walls. Excavating near a neighbour's foundations and underpinning a party wall are both notifiable under the Party Wall etc. Act 1996 in England and Wales.
  • Victorian and Edwardian cellars often have shallow brick walls, vaulted coal stores extending under the front garden or pavement, and little or no damp protection. The engineer checks whether vaults and walls can stay and what new support they need.

How the job runs in Aldershot

  1. Survey in Aldershot

    We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.

  2. Engineer's design

    A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.

  3. Building control

    We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.

  4. Install and sign-off

    Props go in, the opening is formed, the steel is set and packed, building control inspects it, and we make good.

What do basement & cellar steels cost in Aldershot?

As a guide, budget £2,800–£7,300 including VAT for basement or cellar steelwork in Aldershot, based on published UK cost guides adjusted for prices in the South East (+12%).

JobTypical guide rangeWhat it usually covers
Basement or cellar steelwork£2,800–£7,300Beams and columns with pad foundations under the floor above (excavation and waterproofing extra)
Fire protection to a steel beam£170–£670 per beamFire-rated board boxing or an intumescent coating system as specified
Steel column or post£560–£1,680 per columnColumn supplied and fitted with base and cap plates on a pad foundation
Building control fees£280–£730Building notice or full plans fee and inspections; varies by council or approver

Figures include our approximate regional adjustment for prices in the South East (+12%) and are rounded. How these figures are worked out.

Building rules for Aldershot

In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.

If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.

Building rules in England

Basement & cellar steels near Aldershot

Basement & cellar steels in Aldershot: your questions

Who approves basement & cellar steels in Aldershot?

Structural work in Aldershot needs a building notice or full plans application to the local council's building control team or a registered building control approver. We prepare and submit it with the structural engineer's calculations and arrange the inspections, so the completion paperwork follows the job.

Can you work on older or listed homes in Aldershot?

Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.

Do I need steel beams for a cellar conversion?

Often, yes. If any cellar walls are being removed or opened up, or the ground floor above is being altered for a stair or lightwell, steel beams and columns are usually needed to carry the house above. A structural engineer looks at the layout and loads and specifies the steelwork.

Do you do the underpinning for a basement?

Underpinning is specialist work, and we coordinate the steelwork with the underpinning contractor rather than carrying it out ourselves. The engineer designs the steel and the underpinning sequence together, so beams, columns and new foundations fit the order in which the walls are deepened.

How long does it take to fit steels in a basement?

Each stage of steelwork usually takes a few days, but it happens at several points through a basement project rather than all at once. The overall programme is set by the excavation, underpinning and waterproofing, and the steel is installed whenever the sequence reaches it.

Do you also work near Aldershot?

Yes. We also cover nearby towns including Farnham, Farnborough, Fleet and Camberley.

Planning to take a wall out?

Book a free survey visit. You get an itemised written quote covering calculations, building control, steel and making good.