Basement & cellar steels · Greater Manchester
Basement & cellar steels in Greater Manchester
Basement & cellar steels across Greater Manchester, designed by a structural engineer and signed off by building control.
- Survey, design and installation in one
- Covering BL0, BL1, BL2, BL3
- Inspected before it is covered
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
What basement & cellar steels involve in Greater Manchester
Basement and cellar steels are the beams and columns that hold up the house above when walls are removed, openings are formed or new space is dug out below ground level. They carry the ground floor and walls down to new foundations, and are installed in a sequence set out by a structural engineer, alongside underpinning, excavation and waterproofing.
Looking for basement & cellar steels in Greater Manchester? We can survey in places such as Middleton, Rochdale and Ashton-under-Lyne and the villages around them. Our teams handle the calculations, the building control approval, the propping and the steel itself, and leave the opening ready for plastering and decoration.
Worth knowing before you start
- A basement room needs a safe way out in a fire, which affects the stair, the doors and sometimes an escape window into a lightwell. Steel in the basement ceiling also commonly needs fire protection to the standard building control asks for.
- In terraced and semi-detached homes, basement work nearly always affects shared walls. Excavating near a neighbour's foundations and underpinning a party wall are both notifiable under the Party Wall etc. Act 1996 in England and Wales.
- Keep the engineer's calculations, waterproofing details, any party wall documents and the completion certificate together. Basement conversions attract questions from buyers' surveyors and lenders, and a complete paper trail makes those questions easier to answer.
- Cellars often house gas meters, the incoming water main, the electricity supply and old drainage. These are mapped before work starts, gas work must by law be done by a Gas Safe registered engineer, and the electricity network operator may need to move a supply.
- Victorian and Edwardian cellars often have shallow brick walls, vaulted coal stores extending under the front garden or pavement, and little or no damp protection. The engineer checks whether vaults and walls can stay and what new support they need.
How the job runs in Greater Manchester
Free visit
A short visit to Greater Manchester to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
Guide prices for basement & cellar steels in Greater Manchester
As a guide, budget £2,400–£6,250 including VAT for basement or cellar steelwork in Greater Manchester, based on published UK cost guides adjusted for prices in the North West (-4%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Basement or cellar steelwork | £2,400–£6,250 | Beams and columns with pad foundations under the floor above (excavation and waterproofing extra) |
| Steel column or post | £480–£1,440 per column | Column supplied and fitted with base and cap plates on a pad foundation |
| Building control fees | £240–£620 | Building notice or full plans fee and inspections; varies by council or approver |
| Temporary works and propping | £140–£480 | Props, spreaders, needles and sole plates for a typical opening, installed and struck |
Figures include our approximate regional adjustment for prices in the North West (-4%) and are rounded. How these figures are worked out.
Building rules for Greater Manchester
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Basement & cellar steels by town
- Manchester
- Oldham
- Wigan
- Bolton
- Stockport
- Salford
- Rochdale
- Sale
- Bury
- Altrincham
- Middleton
- Ashton-under-Lyne
- Leigh
- Stretford
- Urmston
- Chadderton
- Eccles
- Tyldesley
- Hyde
- Walkden
- Prestwich
- Radcliffe
- Cheadle Hulme
- Heywood
- Denton
- Stalybridge
- Ashton in Makerfield
- Westhoughton
- Farnworth
- Saddleworth
- Hindley
- Golborne
- Droylsden
- Whitefield
- Swinton
- Royton
- Atherton
- Dukinfield
- Failsworth
- Hazel Grove
Local questions answered
What happens at the survey visit in Greater Manchester?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.
How much headroom do I need for a basement conversion?
Enough for the finished room to be comfortable and for the stair to meet the building regulations headroom rules. Steel depth affects that, so the engineer may choose a shallower section or set beams within the floor above. Where headroom is too tight, lowering the floor with underpinning may be an option.
Do I need a party wall notice for basement work?
In England and Wales usually yes, if you are excavating near a neighbour's foundations within the distances the Party Wall etc. Act 1996 sets, or underpinning a shared wall. Notice periods apply before that work starts. We arrange a party wall surveyor to handle the notices, though we do not give legal advice.
How long does it take to fit steels in a basement?
Each stage of steelwork usually takes a few days, but it happens at several points through a basement project rather than all at once. The overall programme is set by the excavation, underpinning and waterproofing, and the steel is installed whenever the sequence reaches it.
Will columns be needed in my basement?
Quite often. Below ground there may be no suitable wall to support the end of a beam, so a column carries the load down to a foundation. The position can usually be agreed with you at design stage so the column sits within a wall line, a kitchen island or a storage area.