Wider doorways & openings · Gloucestershire
Wider doorways & openings in Gloucestershire
Survey, engineer's design and installation of wider doorways & openings anywhere in Gloucestershire.
- Price fixed in writing once scope is agreed
- Building control arranged
- Temporary works and making good included
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
What wider doorways & openings involve in Gloucestershire
Wider doorways and openings are gaps formed or enlarged in internal walls, with a lintel or steel beam carrying the masonry and loads above. They sit between a simple door change and a full wall removal: the span is shorter, but each opening still needs the right support and approval if the wall is structural.
Wider doorways & openings in Gloucestershire follows the same careful process wherever the property is: a survey, an engineer's design, the right approval and safe temporary works. We work in Cirencester, Yate and Tewkesbury and the surrounding villages. We price it all up front so there are no surprises once the wall is open.
Worth knowing before you start
- Light switches, sockets and cables often sit right beside a doorway. These are moved before cutting, and any electrical alterations in England must comply with Part P of the building regulations where they are notifiable.
- Hallway walls are often load-bearing because they line up with walls upstairs and carry the floor joists or the stairs. A wall that sounds hollow when knocked is usually a stud partition, but older homes can have timber walls that still carry loads, so the engineer checks.
- In older houses, a doorway may already have a timber lintel that has rotted or a brick arch that is hard to extend. These are replaced rather than added to, and the engineer allows for soft lime mortar and any cracking found once the wall is opened.
- The main cost factors are whether the wall is structural, the width of the opening, what the support bears onto, how much electrical or heating work has to move, and whether you want new door linings and doors fitted as part of the job.
- When an opening widens, the old threshold strip and floor finishes often stop short. Carpet, boards or tiles need joining neatly across the new width, and a change in floor height between rooms may need a threshold bar or a gentle ramp.
Four stages, one team
Free visit
A short visit to Gloucestershire to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
Guide prices for wider doorways & openings in Gloucestershire
As a guide, budget £1,050–£2,600 including VAT for widening an internal doorway in Gloucestershire, based on published UK cost guides adjusted for prices in the South West (+3%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Widening an internal doorway | £1,050–£2,600 | Opening widened with a new lintel or short beam, approval where structural, and making good |
| Structural calculations for a beam | £260–£770 | Site measure or photos, beam and padstone design and calculations for building control |
| RSJ supply and fit (single beam) | £820–£2,580 per beam | Beam supplied, delivered, lifted and packed on padstones, with propping (calculations and approval priced separately) |
| Building control fees | £260–£670 | Building notice or full plans fee and inspections; varies by council or approver |
Figures include our approximate regional adjustment for prices in the South West (+3%) and are rounded. How these figures are worked out.
Building rules for Gloucestershire
Structural openings in English homes need building regulations approval before work starts. The local council's building control team can deal with it, or you can use a registered building control approver. Either way the steel is inspected before it is covered, and a completion certificate is issued at the end. Keep it safe for when you sell.
Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.
Wider doorways & openings by town
Local questions answered
Do I need a party wall agreement for wider doorways & openings in Gloucestershire?
Yes, if the beam bears into a shared wall: the Party Wall etc. Act 1996 applies in England and Wales, and a party structure notice must be served at least two months before that work starts. We arrange it through a party wall surveyor.
Which towns in Gloucestershire do you cover?
We cover towns including Gloucester, Cheltenham, Stroud and Kingswood, plus the villages and smaller towns around them.
How long does it take to widen a doorway?
The structural part usually takes one to two working days: propping, cutting the opening, fitting the lintel or beam and packing it. Plastering follows, then a few days of drying before linings are painted or a new door is hung. Building control inspection fits in once the support is in place.
Can a doorway be widened for wheelchair access?
Yes, and it is one of the most practical home adaptations. The opening is sized for the clear width needed, allowing for the door, lining and door stops. If a council grant or occupational therapist is involved, share their requirements with us so the opening is designed to meet them first time.
Can I widen a doorway in a load-bearing wall?
Yes. The extra width is spanned by a lintel or steel beam that a structural engineer specifies, sitting on solid bearings either side. Because the wall is structural, the work needs building control approval in England and Wales, a building warrant in Scotland, or a council building control application in Northern Ireland. We arrange the design and approval.
How wide can I make a doorway?
That depends on the wall, what it carries and how much solid wall is left at each side for the support to bear on, and a structural engineer sets the limit. Many people go from a single door to a double-width opening, and beyond that the job starts to become a partial wall removal.
How much do wider doorways & openings cost in Gloucestershire?
As a guide, budget £1,050–£2,600 including VAT for widening an internal doorway in Gloucestershire, based on published UK cost guides adjusted for prices in the South West (+3%). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.