Lintel replacement · Gloucestershire
Lintel replacement in Gloucestershire
Calculations, approvals, propping, steel and making good for lintel replacement across Gloucestershire.
- Itemised written quote
- Beam sized by a structural engineer
- Covering Gloucestershire and nearby
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Planning lintel replacement in Gloucestershire
Lintel replacement is the removal of a failed beam above a window, door or other opening and its replacement with a new lintel specified by a structural engineer. The masonry above is held on temporary supports while the old lintel comes out, the new one is bedded level on sound bearings, and the brickwork and plaster around it are rebuilt and made good.
We carry out lintel replacement throughout Gloucestershire, for homeowners, landlords and builders who need the structural part done properly. That includes Mangotsfield, Yate and Gloucester, plus smaller towns and villages nearby. You get an itemised written quote that shows the calculations, approvals, steel, labour and finishing as separate lines.
Worth knowing before you start
- In cavity walls, a cavity tray and weep vents above the lintel send any water in the cavity back outside. Missing trays are a frequent cause of damp patches above window heads, so they are fitted as part of the replacement.
- Bricks taken down are cleaned and reused where possible, and any shortfall is made up with reclaimed or close-matching bricks. Mortar is mixed to suit the colour and strength of the existing wall, which in older homes often means a lime mortar.
- Windows and doors can often stay in place during a lintel replacement, keeping the house secure and weathertight. Where a frame has been carrying sagging brickwork for some time, it may need adjusting or replacing once the new lintel takes the load.
- Concrete lintels fail when the steel reinforcement inside rusts and swells, pushing off the concrete face. Rust staining, flaking edges and exposed bars are the warning signs, and once that process is well under way an engineer will often recommend replacement over patching.
- Older steel lintels and bare steel angles can corrode where water sits on them. Rust takes up more room than the steel it comes from, so a corroding lintel can lift the brick course above it and open up horizontal cracks.
How the job runs in Gloucestershire
Look and measure
We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.
Design and price
Calculations come back from the engineer and we confirm your fixed written price, line by line.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Fit, inspect, finish
The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.
Guide prices for lintel replacement in Gloucestershire
As a guide, budget £410–£1,240 per lintel including VAT for lintel replacement in Gloucestershire, based on published UK cost guides adjusted for prices in the South West (+3%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Lintel replacement | £410–£1,240 per lintel | Propping, removing the old lintel, new lintel set on beds and brickwork made good |
| Widening an internal doorway | £1,050–£2,600 | Opening widened with a new lintel or short beam, approval where structural, and making good |
| Temporary works and propping | £150–£520 | Props, spreaders, needles and sole plates for a typical opening, installed and struck |
| Rear wall opening for bi-fold or sliding doors | £2,600–£7,200 | External wall opened up to about 5 m with steel, propping, cavity tray and making good (doors supplied separately) |
Figures include our approximate regional adjustment for prices in the South West (+3%) and are rounded. How these figures are worked out.
Approvals in Gloucestershire
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.
Lintel replacement by town
Lintel replacement in Gloucestershire: your questions
Do you cover Gloucestershire for lintel replacement?
Yes. We carry out lintel replacement in Gloucestershire. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.
What happens at the survey visit in Gloucestershire?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.
What type of lintel will be fitted?
The engineer decides, based on the opening width, the wall construction and the load above. Steel lintels are common in cavity walls, while solid walls or wide openings may suit a different type or a steel section. We fit what the specification calls for rather than a one-size option.
Will the new brickwork match the old?
We aim for a close match by reusing the original bricks wherever they come out cleanly and sourcing reclaimed or similar bricks for any shortfall. Mortar colour and type are chosen to suit the existing wall. New work can look slightly fresher at first and tends to weather in over time.
Can a timber lintel in an old house be replaced with steel or concrete?
Yes, where the engineer is satisfied it suits the wall. Timber lintels in older solid-walled homes are often swapped for a steel or concrete alternative that will not rot. The engineer considers how the wall is built, and where lime mortar is present the rebuild uses a compatible mortar.
How long does lintel replacement take?
Most single openings take one to two working days on site, covering propping, removing the old lintel, fitting the new one and rebuilding the brickwork. Upper-floor lintels needing scaffolding, wide bay windows, and jobs where bricks must be sourced to match can all take longer.