Structural calculations · Solihull
Structural calculations in Solihull
Structural calculations for homes in B90, B91, B92, designed by a structural engineer.
- Survey, design and installation in one
- Covering B90, B91, B92
- Inspected before it is covered
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
About our structural calculations service in Solihull
Solihull has a mix of housing, and structural calculations need a slightly different approach in each. It sits about 6.8 miles from Birmingham, which we also cover. Whatever the age of the property, the steel goes in on proper bearings with temporary support in place throughout.
We arrange the calculations as part of every structural job, or work to calculations you already have if they match the design. The engineer's output goes to building control with the application, and the same figures guide the steel order, the padstones and the propping on site.
Worth knowing before you start
- Older buildings take more judgement. Lime mortar, rubble-filled walls, timber bressummers and shallow footings all affect how loads are carried, so engineers working on period properties often allow for weaker materials or ask for more investigation.
- Opening up can reveal things no survey could see, such as a hidden chimney flue, joists running the other way or a wall with no footing. When that happens, the engineer revises the design before work continues, and any change is priced before it goes ahead.
- If you already have calculations from your own engineer or architect, we can work to them, provided they match the layout being built. We check that the spans, loads and bearings shown agree with what is on site before ordering steel.
- Building control uses the calculations to check compliance with Part A of the Building Regulations in England and Wales, or the equivalent structural standards in Scotland and Northern Ireland. Without them, an application for structural work is unlikely to be approved.
- A typical calculation pack covers the loads assumed, the beam section chosen, checks for bending, shear and deflection, the bearing and padstone design, and any column or foundation design. It is usually accompanied by a drawing or sketch showing positions.
From survey to sign-off in Solihull
Free visit
A short visit to Solihull to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building control
We submit a building notice or full plans application to Solihull Council, so approval is in place before the wall is touched.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
What do structural calculations cost in Solihull?
As a guide, budget £250–£750 including VAT for structural calculations for a beam in Solihull, based on published UK cost guides adjusted for prices in the West Midlands (no adjustment).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Structural calculations for a beam | £250–£750 | Site measure or photos, beam and padstone design and calculations for building control |
| Load-bearing wall removal with steel beam | £2,000–£5,000 | Typical internal wall up to about 4 m: calculations, building control, propping, steel, padstones, fitting, fire protection and making good |
| Temporary works and propping | £150–£500 | Props, spreaders, needles and sole plates for a typical opening, installed and struck |
| Building control fees | £250–£650 | Building notice or full plans fee and inspections; varies by council or approver |
Figures include our approximate regional adjustment for prices in the West Midlands (no adjustment) and are rounded. How these figures are worked out.
Building rules for Solihull
For Solihull, building control is provided by Solihull Council, or by a registered building control approver if preferred. We send them the engineer's calculations with a building notice or full plans application and book the inspections. Work done without approval can cause problems at sale and is far dearer to put right later.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Structural calculations near Solihull
- Shirley 1.6 mi
- Acocks Green 2.9 mi
- Birmingham 6.8 mi
- Aston 7.3 mi
- Bartley Green 9.2 mi
- Kenilworth 9.5 mi
Questions about structural calculations in Solihull
Do I need a party wall agreement for structural calculations in Solihull?
Yes, if the beam bears into a shared wall: the Party Wall etc. Act 1996 applies in England and Wales, and a party structure notice must be served at least two months before that work starts. We arrange it through a party wall surveyor.
Do you also work near Solihull?
Yes. We also cover nearby towns including Shirley, Acocks Green, Birmingham and Aston.
Do I need calculations for an old beam when selling my house?
Often a buyer's surveyor or solicitor will ask for them if there is no record of the beam being approved. An engineer can inspect the existing steel, check it against the loads and issue calculations or a report. In England and Wales these can support a regularisation application for retrospective approval.
Do structural calculations tell you which beam to buy?
Yes. The calculations specify the steel section, its grade and length, and the padstones or columns it needs, so the fabricator can supply exactly what was designed. Substituting a different beam on site without the engineer's agreement would leave the work out of line with the approved design.
What do structural calculations for a steel beam include?
They include the loads the beam carries, the steel section chosen, checks for bending, shear and deflection, and the design of the padstones or columns at each end. Most packs also come with a drawing or sketch showing positions and bearing details, and note the fire protection and any propping requirements.
Can you work on older or listed homes in Solihull?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.