Steel BeamInstallers
Brick wall partly removed with a primed steel beam on padstones and props beneath

Load-bearing wall removal · Solihull

Load-bearing wall removal in Solihull

Load-bearing wall removal for homes in B90, B91, B92, designed by a structural engineer.

  • Free survey visit in Solihull
  • Engineer's calculations arranged
  • Building control handled for you

Free survey in Solihull

Tell us about the load-bearing wall removal job in Solihull.

Please enter your name.
Please enter a UK phone number.
Please enter a valid email.
Please enter a UK postcode.
Please tell us a little about the job.
  • Free survey visit
  • Engineer's calculations arranged
  • Building control handled
  • Fixed written price once scope is agreed
  • England, Wales, mainland Scotland & NI

Planning load-bearing wall removal in Solihull

Need load-bearing wall removal in Solihull? We also work in nearby Birmingham, roughly 6.8 miles away. We survey the property, arrange the engineer's design, deal with Solihull Council, fit the steel and make good, all under one quote for B90, B91, B92 and B93 addresses.

Most homes built before the 1970s have at least one internal wall that carries the floor joists, a wall upstairs or part of the roof. Taking it out is very doable, but the weight it carries has to go somewhere. A steel beam picks that load up and passes it down through padstones into walls or columns that can take it.

What to expect

  • Expect some dust and noise for a day or two while the wall comes out. We screen the work area, protect floors and sweep up daily, and the rest of the house usually stays usable throughout.
  • Each end of the beam needs a solid bearing. Padstones spread the point load into the masonry below, and if the wall underneath is weak the engineer may call for a steel column or a new pad foundation instead.
  • Older homes can hide surprises such as weak lime mortar, timber lintels or a wall with no proper footing. Where the engineer needs something extra, we price it before any work starts rather than after.
  • Steel beams in homes usually need fire protection. That is often fire-rated plasterboard boxing, which also gives a neat finish, or intumescent paint where the steel is left on show.
  • The finished opening should be signed off with a completion certificate from building control. Keep it with your house documents, as solicitors ask for it when the property is sold.

Four stages, one team

  1. Free visit

    A short visit to Solihull to see the job, agree what you want and check the bearings, floors and services that affect the design.

  2. Calculations

    The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.

  3. Building control

    We submit a building notice or full plans application to Solihull Council, so approval is in place before the wall is touched.

  4. Steel in, made good

    On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.

Guide prices for load-bearing wall removal in Solihull

As a guide, budget £2,000–£5,000 including VAT for load-bearing wall removal with steel beam in Solihull, based on published UK cost guides adjusted for prices in the West Midlands (no adjustment).

JobTypical guide rangeWhat it usually covers
Load-bearing wall removal with steel beam£2,000–£5,000Typical internal wall up to about 4 m: calculations, building control, propping, steel, padstones, fitting, fire protection and making good
Structural calculations for a beam£250–£750Site measure or photos, beam and padstone design and calculations for building control
Kitchen-diner knock-through£2,500–£6,000Internal structural wall between kitchen and dining room, steel beam, approvals and making good (kitchen fitting extra)
Building control fees£250–£650Building notice or full plans fee and inspections; varies by council or approver

Figures include our approximate regional adjustment for prices in the West Midlands (no adjustment) and are rounded. How these figures are worked out.

Approvals in Solihull

For Solihull, building control is provided by Solihull Council, or by a registered building control approver if preferred. We send them the engineer's calculations with a building notice or full plans application and book the inspections. Work done without approval can cause problems at sale and is far dearer to put right later.

If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.

Building rules in England

Load-bearing wall removal near Solihull

Questions about load-bearing wall removal in Solihull

What happens at the survey visit in Solihull?

We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.

Do you also work near Solihull?

Yes. We also cover nearby towns including Shirley, Acocks Green, Birmingham and Aston.

What happens if the wall is shared with my neighbour?

In England and Wales, cutting into a party wall to take the end of a beam is covered by the Party Wall etc. Act 1996, and notice must be served on the neighbour before work starts. Scotland and Northern Ireland have no equivalent Act, so the title deeds and the general law apply instead.

How do I know if my wall is load-bearing?

Clues include floor joists that run across the top of the wall, a wall directly above it upstairs, and a wall that is solid brick or block rather than a hollow stud partition. None of these is proof on its own. A structural engineer checks on site and confirms it before any work is planned.

Do I need building regulations approval to remove a load-bearing wall?

Yes. In England removing a structural wall is building work that needs building control approval, through a full plans application or a building notice. In Wales it needs an application under the Welsh regulations. In Scotland it needs a building warrant before work starts, and in Northern Ireland the council's building control must receive a full plans application or, for an existing single dwelling, a building notice before work starts. We arrange this as part of the job.

Planning to take a wall out?

Book a free survey visit. You get an itemised written quote covering calculations, building control, steel and making good.