Shop & commercial openings · Exmouth
Shop & commercial openings in Exmouth
Shop & commercial openings in Exmouth, from free survey to completion certificate.
- Itemised written quote
- Beam sized by a structural engineer
- Covering Exmouth and nearby
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Shop & commercial openings in Exmouth: how it works
Exmouth has a mix of housing, and shop & commercial openings need a slightly different approach in each. Exmouth is around 9.2 miles from Exeter, and we cover both. Whatever the age of the property, the steel goes in on proper bearings with temporary support in place throughout.
Commercial buildings often have a flat or offices above the shop, a heavy brick front and old steel or timber over the existing shopfront. Opening them up means supporting a lot of load at street level, usually with the public walking past, while keeping disruption to trading as low as possible.
What to expect
- Commercial openings tend to need longer, heavier steel than domestic work. Deliveries are planned around loading restrictions, and sections may be lifted with a small crane, telehandler or chain hoist, or spliced and bolted in place where the engineer allows.
- Commercial premises often have three-phase power, alarm and data cabling, gas supplies and drainage running through the walls being altered. These are mapped at the survey, and any work on gas pipes must by law be done by a Gas Safe registered engineer.
- Commercial buildings built before 2000 should already have an asbestos register under the duty to manage. Before walls or ceilings are opened up, the register is checked and a refurbishment survey of the work area is arranged where it does not cover the job.
- Plenty of businesses keep trading while the work goes on. Dust screens, hoarding and phased working can keep part of the premises open, and the noisiest cutting can be programmed outside opening hours where the building and neighbours allow.
- Structural alterations to commercial premises need building regulations approval just as homes do, and in Scotland a building warrant before work starts. In England they usually go through a full plans application, because fire safety is assessed alongside the structure.
Four stages, one team
Look and measure
We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.
Design and price
Calculations come back from the engineer and we confirm your fixed written price, line by line.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Fit, inspect, finish
The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.
How much should I budget in Exmouth?
As a guide, budget £5,150–£15,450 including VAT for shop or commercial structural opening in Exmouth, based on published UK cost guides adjusted for prices in the South West (+3%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Shop or commercial structural opening | £5,150–£15,450 | Transfer beam and columns for opening units together or forming a shopfront opening |
| Party wall surveyor (agreed surveyor, per neighbour) | £930–£2,060 per neighbour | Schedule of condition and award where a neighbour dissents; serving notice alone, where the neighbour consents, costs far less (England and Wales only) |
| Fire protection to a steel beam | £150–£620 per beam | Fire-rated board boxing or an intumescent coating system as specified |
| Steel beam replacement | £2,050–£5,650 | Propping, removing the failed beam, new steel on proper bearings, approval and making good |
Figures include our approximate regional adjustment for prices in the South West (+3%) and are rounded. How these figures are worked out.
Approvals in Exmouth
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Local questions answered
How soon can shop & commercial openings start in Exmouth?
Start dates depend on the engineer's calculations, the building control approval and, where needed, party wall notice periods. We give you a realistic timetable after the survey and keep you updated as each approval comes through.
How much do shop & commercial openings cost in Exmouth?
As a guide, budget £5,150–£15,450 including VAT for shop or commercial structural opening in Exmouth, based on published UK cost guides adjusted for prices in the South West (+3%). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.
Can commercial steel beam work be done outside opening hours?
In many cases, yes. Noisy cutting and the main structural stages can be programmed for evenings, early mornings or weekends where the landlord, the building and neighbouring occupiers allow. Out-of-hours working is priced as a separate line on the itemised quote, so you can weigh it against closing for part of the job.
Do I need planning permission for a new shop front?
Often, yes. A new or altered shopfront usually changes how the building looks from the street, which can need planning permission, especially in a conservation area. Purely internal openings generally do not, but listed buildings need listed building consent for structural changes inside or out. It is worth checking with the local planning authority early.
Do I need an asbestos survey before work on my shop?
Usually, if the building dates from before 2000. The duty holder for commercial premises should already have an asbestos register, and before walls, ceilings or the shopfront are opened up, a refurbishment survey of the work area is needed wherever that register does not cover it, so any asbestos is dealt with first.