Shop & commercial openings · Devon
Shop & commercial openings in Devon
Calculations, approvals, propping, steel and making good for shop & commercial openings across Devon.
- Price fixed in writing once scope is agreed
- Building control arranged
- Temporary works and making good included
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
About our shop & commercial openings service in Devon
Shop and commercial openings are structural alterations in retail, office, café and light industrial premises: forming a new or wider shopfront, joining two units through a dividing wall, or removing internal walls for open floor space. A steel beam or frame, designed by a structural engineer, carries the floors and walls above, with the work approved by building control.
Looking for shop & commercial openings in Devon? We work in Barnstaple, Plymouth and Paignton and the surrounding villages. Our teams handle the calculations, the building control approval, the propping and the steel itself, and leave the opening ready for plastering and decoration.
What to expect
- Commercial openings tend to need longer, heavier steel than domestic work. Deliveries are planned around loading restrictions, and sections may be lifted with a small crane, telehandler or chain hoist, or spliced and bolted in place where the engineer allows.
- Purely internal works may not need planning permission, but a new or altered shopfront changes the look of the building and may need it, particularly in a conservation area. Listed commercial buildings also need listed building consent for structural changes.
- Commercial buildings built before 2000 should already have an asbestos register under the duty to manage. Before walls or ceilings are opened up, the register is checked and a refurbishment survey of the work area is arranged where it does not cover the job.
- The main cost factors are the span and load above, whether columns or a goalpost frame are needed, the temporary works at the street, out-of-hours working, lifting equipment, and the fire protection and finish the opening requires.
- A straightforward shopfront beam replacement can take a few days on site, while joining two units with several openings may run to a couple of weeks. The programme is agreed in writing before work starts so you can plan trading around it.
Four stages, one team
Free visit
A short visit to Devon to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
How much should I budget in Devon?
As a guide, budget £5,150–£15,450 including VAT for shop or commercial structural opening in Devon, based on published UK cost guides adjusted for prices in the South West (+3%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Shop or commercial structural opening | £5,150–£15,450 | Transfer beam and columns for opening units together or forming a shopfront opening |
| Temporary works and propping | £150–£520 | Props, spreaders, needles and sole plates for a typical opening, installed and struck |
| Steel beam replacement | £2,050–£5,650 | Propping, removing the failed beam, new steel on proper bearings, approval and making good |
| Building control fees | £260–£670 | Building notice or full plans fee and inspections; varies by council or approver |
Figures include our approximate regional adjustment for prices in the South West (+3%) and are rounded. How these figures are worked out.
Approvals in Devon
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.
Local questions answered
How much do shop & commercial openings cost in Devon?
As a guide, budget £5,150–£15,450 including VAT for shop or commercial structural opening in Devon, based on published UK cost guides adjusted for prices in the South West (+3%). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.
Can you work on older or listed homes in Devon?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.
Will I have to close my shop while the work is done?
Not always. Depending on the layout, the work area can be screened off with hoarding so part of the premises keeps trading, and the noisiest stages can be done out of hours. Some jobs, such as replacing the beam across the whole frontage, may need a short closure, which is planned well in advance.
Can commercial steel beam work be done outside opening hours?
In many cases, yes. Noisy cutting and the main structural stages can be programmed for evenings, early mornings or weekends where the landlord, the building and neighbouring occupiers allow. Out-of-hours working is priced as a separate line on the itemised quote, so you can weigh it against closing for part of the job.
Can I knock two shops into one?
Usually, yes, with the right approvals. The dividing wall is replaced with steel designed by a structural engineer, building control approves the work and the fire strategy is updated for the combined unit. You also need landlord consent if you lease either unit, and party wall notices in England and Wales if the steel bears into a wall shared with another owner.
How does fire safety change when two units are joined?
It can change significantly. The wall between the units may have been a compartment wall, escape routes and travel distances alter, and the new steel needs fire protection to the required period. Building control assesses this as part of the application, and the fire risk assessment for the premises should be updated for the new layout.
Which towns in Devon do you cover?
We cover towns including Plymouth, Exeter, Paignton and Torquay, plus the villages and smaller towns around them.