Party wall beam works · Wiltshire
Party wall beam works in Wiltshire
Party wall beam works across Wiltshire, designed by a structural engineer and signed off by building control.
- Survey, design and installation in one
- Covering BA12, BA13, BA14, BA15
- Inspected before it is covered
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Planning party wall beam works in Wiltshire
Party wall beam works are building jobs where a steel beam or padstone is set into a wall shared with a neighbour. In England and Wales, cutting into a party wall to take a beam's bearing is notifiable under the Party Wall etc. Act 1996, so notice must be served on the adjoining owner before work begins.
Party wall beam works are one of the most common structural jobs in homes across Wiltshire. Coverage takes in Swindon, Chippenham and Salisbury and everywhere in between. Every job starts with a survey visit, then calculations from a structural engineer, so the steel suits the house in front of us rather than a rule of thumb.
Key points for your project
- A party wall is usually the wall dividing two attached homes, such as the wall between terraced or semi-detached houses. Garden walls straddling the boundary are party fence walls, but for beam work it is the main separating wall between the houses that usually matters.
- An adjoining owner can consent in writing, dissent, or serve a counter-notice asking for extra works to suit them. Silence after the response period is treated as a dissent, which simply means surveyors are appointed to agree how the work proceeds.
- A party structure notice must be served at least two months before the work starts. That lead time is easy to overlook, so we build it into the programme from the first visit rather than discovering it when the steel is ready.
- Cutting into a party wall to take the bearing of a beam is notifiable work under the Party Wall etc. Act 1996. So is cutting away projections attached to the wall, such as chimney breasts, which often comes up during knock-throughs.
- Keep the notices, any written consent, the schedule of condition and the award with your building control certificate. A buyer's solicitor may ask whether party wall procedures were followed, and these documents answer that. For legal questions, a solicitor or the surveyor is the right adviser.
How the job runs in Wiltshire
Free visit
A short visit to Wiltshire to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
What do party wall beam works cost in Wiltshire?
As a guide, budget £930–£2,060 per neighbour including VAT for party wall surveyor (agreed surveyor, per neighbour) in Wiltshire, based on published UK cost guides adjusted for prices in the South West (+3%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Party wall surveyor (agreed surveyor, per neighbour) | £930–£2,060 per neighbour | Schedule of condition and award where a neighbour dissents; serving notice alone, where the neighbour consents, costs far less (England and Wales only) |
| Chimney breast removal (ground floor) | £1,550–£3,100 | Ground-floor breast removed, steel to support the breast above, building control and making good |
| Building control fees | £260–£670 | Building notice or full plans fee and inspections; varies by council or approver |
| Loft conversion steels | £2,600–£6,200 | Supply and fit of floor and ridge steels on padstones, including lifting into the roof space |
Figures include our approximate regional adjustment for prices in the South West (+3%) and are rounded. How these figures are worked out.
Approvals in Wiltshire
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Party wall beam works by town
Party wall beam works in Wiltshire: your questions
Can you work on older or listed homes in Wiltshire?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.
Can I stay at home while the work is done in Wiltshire?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.
Can you serve party wall notices for me?
Yes, we arrange notices through a party wall surveyor as part of the job where they are needed. The surveyor prepares and serves the correct notice with the drawings, handles the neighbour's response and, if needed, takes part in the process that leads to an award. We coordinate the timing with the build but do not give legal advice ourselves.
Do I need a party wall agreement to put a steel beam in?
Yes, in England and Wales, if the beam will bear into a wall you share with a neighbour. Notice is required under the Party Wall etc. Act 1996, and the neighbour may consent in writing or dissent, in which case surveyors produce a party wall award. Scotland and Northern Ireland have no equivalent Act.
Do party wall rules apply in Scotland?
No. The Party Wall etc. Act 1996 covers England and Wales only. In Scotland, rights and responsibilities for a shared wall come from the title deeds and common law, and in flats from the Tenements (Scotland) Act 2004. A building warrant must still be granted before any structural beam work begins.
What is a schedule of condition?
A schedule of condition is a written and photographic record of the neighbour's property, focused on the rooms next to the party wall, made before work starts. It notes existing cracks, stains and finishes. If damage is alleged later, the surveyors compare the property with the schedule to see what changed during the work.