Party wall beam works · Conwy
Party wall beam works in Conwy
Calculations, approvals, propping, steel and making good for party wall beam works across Conwy.
- Free survey visit in Conwy
- Engineer's calculations arranged
- Building control handled for you
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
What party wall beam works involve in Conwy
Party wall beam works are one of the most common structural jobs in homes across Conwy. We can survey in places such as Llandudno, Abergele and Colwyn Bay and the villages around them. Every job starts with a survey visit, then calculations from a structural engineer, so the steel suits the house in front of us rather than a rule of thumb.
Things to plan for
- A schedule of condition records the neighbour's side of the wall before work begins, usually with written notes and photographs of existing cracks and finishes. It gives both sides a fair reference point if anyone later claims the work caused damage.
- An adjoining owner can consent in writing, dissent, or serve a counter-notice asking for extra works to suit them. Silence after the response period is treated as a dissent, which simply means surveyors are appointed to agree how the work proceeds.
- Cutting a pocket into a shared wall needs care, because the wall also supports the neighbour's floors and roof. The engineer specifies how the pocket is formed and packed, and props or needles may be needed to keep both houses supported while it is cut.
- Surveyors' fees under the Act are normally the responsibility of whoever is having the work done. Costs rise with the number of adjoining owners, whether each appoints their own surveyor, and how much checking the beam design and method need.
- Party walls in older terraces are often solid brick with lime mortar, and may carry both houses' chimney flues. The engineer checks the wall's condition and thickness where the beam will bear, and the bearing position may be adjusted to avoid flues still in use.
Four stages, one team
Survey in Conwy
We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.
Engineer's design
A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.
Building control
We submit the application or notice to Conwy County Borough Council under the Building Regulations as they apply in Wales, before work starts.
Install and sign-off
Props go in, the opening is formed, the steel is set and packed, building control inspects it, and we make good.
Guide prices for party wall beam works in Conwy
As a guide, budget £820–£1,820 per neighbour including VAT for party wall surveyor (agreed surveyor, per neighbour) in Conwy, based on published UK cost guides adjusted for prices in Wales (-9%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Party wall surveyor (agreed surveyor, per neighbour) | £820–£1,820 per neighbour | Schedule of condition and award where a neighbour dissents; serving notice alone, where the neighbour consents, costs far less (England and Wales only) |
| Through-lounge knock-through | £2,300–£5,000 | Wall between front and back reception rooms, steel beam, approvals, plastering and floor infill |
| Chimney breast removal (ground floor) | £1,350–£2,750 | Ground-floor breast removed, steel to support the breast above, building control and making good |
| Building control fees | £230–£590 | Application fee and inspections under the Welsh building regulations; varies by council or approver |
Figures include our approximate regional adjustment for prices in Wales (-9%) and are rounded. How these figures are worked out.
Building rules for Conwy
Removing a load-bearing wall in Wales needs approval under the Welsh building regulations before work starts. For Conwy the application goes to Conwy County Borough Council or a registered building control approver, with the engineer's calculations, and a completion certificate follows the final inspection.
Where the steel bears into a wall shared with next door, notice must be served under the Party Wall etc. Act 1996. If your neighbour dissents, surveyors agree how the work is done before it starts.
Party wall beam works by town
Party wall beam works in Conwy: your questions
What is a schedule of condition?
A schedule of condition is a written and photographic record of the neighbour's property, focused on the rooms next to the party wall, made before work starts. It notes existing cracks, stains and finishes. If damage is alleged later, the surveyors compare the property with the schedule to see what changed during the work.
Who pays for the party wall surveyor?
Normally the building owner, meaning the person having the work done, pays the reasonable fees of the surveyors for both sides, because the work is for their benefit. Fees vary with the number of neighbours affected and the complexity of the work, which is why they sit as a separate item in our quote.
Can my neighbour stop me putting a beam in the party wall?
Generally no. The Party Wall etc. Act 1996 gives the building owner the right to carry out notifiable work, such as cutting in a beam bearing, provided the proper procedure is followed. A neighbour can dissent, which leads to surveyors setting conditions in an award, but this regulates the work rather than preventing it. Take legal advice on specific disputes.
How much notice do I need to give my neighbour?
At least two months for a party structure notice, which is the notice needed for cutting into a party wall to take a beam. The neighbour can agree in writing to an earlier start, but that cannot be assumed. Building the notice period into the programme early stops it delaying the rest of the job.