Steel BeamInstallers
Brick wall partly removed with a primed steel beam on padstones and props beneath

Load-bearing wall removal · Cardigan

Load-bearing wall removal in Cardigan

Load-bearing wall removal in Cardigan, from free survey to completion certificate.

  • Price fixed in writing once scope is agreed
  • Building control arranged
  • Temporary works and making good included

Free survey in Cardigan

Tell us about the load-bearing wall removal job in Cardigan.

Please enter your name.
Please enter a UK phone number.
Please enter a valid email.
Please enter a UK postcode.
Please tell us a little about the job.
  • Free survey visit
  • Engineer's calculations arranged
  • Building control handled
  • Fixed written price once scope is agreed
  • England, Wales, mainland Scotland & NI

What load-bearing wall removal involves in Cardigan

Our load-bearing wall removal service in Cardigan covers everything from the first visit to the completion paperwork. The wider Ceredigion area is covered as well. Postcode districts we cover here include SA43.

We handle the whole job: a survey visit, structural calculations from a qualified engineer, building control, temporary propping, the steel itself, and making good afterwards. You get one itemised written quote and one team to deal with from first visit to sign-off.

Things to plan for

  • Homes built before 2000 may contain asbestos in textured ceilings, boxing or old boards. Where there is a risk, a survey of the area being disturbed is arranged before the wall comes out.
  • Whether a wall is load-bearing is not always obvious. Joists running across the wall, a wall directly above, or the wall sitting on a footing in the floor are common clues, but the engineer's check on site is what settles it.
  • Most single-wall removals in a typical house take two to five working days on site for the structural part. Plastering, drying out and decorating follow on, and building control visits fit around those stages.
  • If the wall carries a chimney breast, a wall upstairs and floor joists all at once, the engineer may specify a heavier beam or two beams side by side. The quote reflects that once calculations are back.
  • Each end of the beam needs a solid bearing. Padstones spread the point load into the masonry below, and if the wall underneath is weak the engineer may call for a steel column or a new pad foundation instead.

What happens, step by step

  1. Survey in Cardigan

    We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.

  2. Engineer's design

    A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.

  3. Building control

    We submit the application or notice to Ceredigion County Council under the Building Regulations as they apply in Wales, before work starts.

  4. Install and sign-off

    Props go in, the opening is formed, the steel is set and packed, building control inspects it, and we make good.

Guide prices for load-bearing wall removal in Cardigan

As a guide, budget £1,800–£4,550 including VAT for load-bearing wall removal with steel beam in Cardigan, based on published UK cost guides adjusted for prices in Wales (-9%).

JobTypical guide rangeWhat it usually covers
Load-bearing wall removal with steel beam£1,800–£4,550Typical internal wall up to about 4 m: calculations, building control, propping, steel, padstones, fitting, fire protection and making good
Kitchen-diner knock-through£2,300–£5,450Internal structural wall between kitchen and dining room, steel beam, approvals and making good (kitchen fitting extra)
Structural calculations for a beam£230–£680Site measure or photos, beam and padstone design and calculations for building control
Building control fees£230–£590Application fee and inspections under the Welsh building regulations; varies by council or approver

Figures include our approximate regional adjustment for prices in Wales (-9%) and are rounded. How these figures are worked out.

Building control and neighbours in Cardigan

Welsh building regulations treat beams and new openings as controlled building work. We apply to Ceredigion County Council on your behalf before anything is removed, give the commencement notice the 2026 Welsh rules require, and the steel is checked before it is boxed in.

Where the steel bears into a wall shared with next door, notice must be served under the Party Wall etc. Act 1996. If your neighbour dissents, surveyors agree how the work is done before it starts.

Building rules in Wales

Load-bearing wall removal near Cardigan

Local questions answered

Can you work on older or listed homes in Cardigan?

Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.

What happens at the survey visit in Cardigan?

We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.

How long does it take to remove a load-bearing wall?

For a typical house the structural part usually takes two to five working days: propping, taking the wall out, fitting the steel and packing it tight. Plastering and decorating follow once building control has inspected the steel.

Can I stay in the house while the wall is removed?

In most cases yes. The work area is screened, floors are protected and the house stays usable, though the rooms either side of the wall will be out of action for a few days and there will be some noise and dust.

Who sizes the steel beam?

A structural engineer. They look at the span, the loads from floors, walls and roof above, and the bearings at each end, then specify the beam, padstones and any columns. We arrange those calculations, or work to calculations you already have.

Who approves load-bearing wall removal in Cardigan?

Structural work in Cardigan needs a building control application to Ceredigion County Council under the Welsh regulations, with a commencement notice before work starts. We prepare and submit it with the structural engineer's calculations and arrange the inspections, so the completion paperwork follows the job.

Planning to take a wall out?

Book a free survey visit. You get an itemised written quote covering calculations, building control, steel and making good.