Ceredigion · Wales
Steel beam installers in Cardigan
RSJs and steel beams for homes and businesses in Cardigan, with calculations, approvals, propping and making good.
- Free survey visit in Cardigan
- Engineer's calculations arranged
- Building control handled for you
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Steel beam work in Cardigan
Steel beam work in Cardigan covers everything from widening a doorway to opening the whole rear wall. The wider Ceredigion area is covered as well. We survey, arrange the engineer's calculations and Ceredigion County Council, then fit and make good.
In Cardigan, beam work is approved under the Building Regulations as they apply in Wales, and the Party Wall etc. Act 1996 applies to shared walls.
Services in Cardigan
Wall removal & knock-throughs
- Load-bearing wall removal
- Kitchen-diner knock-throughs
- Through-lounge knock-throughs
- Chimney breast removal
New & wider openings
- Wider doorways & openings
- Bi-fold & sliding door openings
- Garage conversion openings
- Lintel replacement
Extensions, lofts & basements
Beams, frames & columns
Design & approvals
- Structural calculations
- Building control sign-off
- Party wall beam works
- Fire protection for steel beams
Site works & commercial
How the job runs in Cardigan
Survey in Cardigan
We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.
Engineer's design
A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.
Building control
We submit the application or notice to Ceredigion County Council under the Building Regulations as they apply in Wales, before work starts.
Install and sign-off
Props go in, the opening is formed, the steel is set and packed, building control inspects it, and we make good.
Guide prices in Cardigan
As a guide, budget £1,800–£4,550 including VAT for load-bearing wall removal with steel beam in Cardigan, based on published UK cost guides adjusted for prices in Wales (-9%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Load-bearing wall removal with steel beam | £1,800–£4,550 | Typical internal wall up to about 4 m: calculations, building control, propping, steel, padstones, fitting, fire protection and making good |
| Chimney breast removal (ground floor) | £1,350–£2,750 | Ground-floor breast removed, steel to support the breast above, building control and making good |
| Rear wall opening for bi-fold or sliding doors | £2,300–£6,350 | External wall opened up to about 5 m with steel, propping, cavity tray and making good (doors supplied separately) |
| Loft conversion steels | £2,300–£5,450 | Supply and fit of floor and ridge steels on padstones, including lifting into the roof space |
| Structural calculations for a beam | £230–£680 | Site measure or photos, beam and padstone design and calculations for building control |
Figures include our approximate regional adjustment for prices in Wales (-9%) and are rounded. How these figures are worked out.
Building rules in Cardigan
Removing a load-bearing wall in Wales needs approval under the Welsh building regulations before work starts. For Cardigan the application goes to Ceredigion County Council or a registered building control approver, with the engineer's calculations, and a completion certificate follows the final inspection.
The Party Wall etc. Act 1996 applies in Wales as well as England, so a beam bearing into a shared wall needs a party structure notice at least two months before work starts. We arrange notices through a party wall surveyor.
Near Cardigan
- Aberaeron 20.3 mi
- Carmarthen 21.8 mi
- Haverfordwest 23.5 mi
- Lampeter 24.7 mi
Steel beams in Cardigan: questions
Do you cover Cardigan for steel beam installation?
Yes. We carry out steel beam installation in Cardigan and the SA43 postcode districts. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.
Do I need a party wall agreement for steel beam installation in Cardigan?
Yes, if the beam bears into a shared wall: the Party Wall etc. Act 1996 applies in England and Wales, and a party structure notice must be served at least two months before that work starts. We arrange it through a party wall surveyor.
What happens at the survey visit in Cardigan?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.
Who approves steel beam installation in Cardigan?
Structural work in Cardigan needs a building control application to Ceredigion County Council under the Welsh regulations, with a commencement notice before work starts. We prepare and submit it with the structural engineer's calculations and arrange the inspections, so the completion paperwork follows the job.
How soon can steel beam installation start in Cardigan?
Start dates depend on the engineer's calculations, the building control approval and, where needed, party wall notice periods. We give you a realistic timetable after the survey and keep you updated as each approval comes through.