Lintel replacement · Faversham
Lintel replacement in Faversham
Lintel replacement for homes in ME13, designed by a structural engineer.
- Price fixed in writing once scope is agreed
- Building control arranged
- Temporary works and making good included
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Lintel replacement in Faversham: how it works
We carry out lintel replacement in Faversham, covering the ME13 postcode district. The wider Kent area is covered as well. The job starts with a free survey visit so the engineer's calculations are based on your actual walls, floors and loads.
A lintel is the short beam that carries the brickwork over a window or door. When it fails, the signs tend to show outside first: a crack stepping up from the corner of the frame, a dip in the brick courses, or a window that has started to bind. Timber, concrete and old steel lintels each fail in their own way, but the fix follows the same principle.
Worth knowing before you start
- Bricks taken down are cleaned and reused where possible, and any shortfall is made up with reclaimed or close-matching bricks. Mortar is mixed to suit the colour and strength of the existing wall, which in older homes often means a lime mortar.
- The replacement is specified by a structural engineer, who looks at the opening width, the wall construction and what the lintel carries, such as floor joists, a bay roof or a gable. Solid walls and cavity walls usually call for different lintel types.
- Diagonal cracks that start at the top corners of a window and step up through the mortar joints are a classic sign of a lintel problem. Movement elsewhere in a house can cause similar cracks, so the cause is confirmed on site before anything is replaced.
- Older steel lintels and bare steel angles can corrode where water sits on them. Rust takes up more room than the steel it comes from, so a corroding lintel can lift the brick course above it and open up horizontal cracks.
- Windows and doors can often stay in place during a lintel replacement, keeping the house secure and weathertight. Where a frame has been carrying sagging brickwork for some time, it may need adjusting or replacing once the new lintel takes the load.
Four stages, one team
Survey in Faversham
We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.
Engineer's design
A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Install and sign-off
Props go in, the opening is formed, the steel is set and packed, building control inspects it, and we make good.
What does lintel replacement cost in Faversham?
As a guide, budget £450–£1,340 per lintel including VAT for lintel replacement in Faversham, based on published UK cost guides adjusted for prices in the South East (+12%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Lintel replacement | £450–£1,340 per lintel | Propping, removing the old lintel, new lintel set on beds and brickwork made good |
| Structural calculations for a beam | £280–£840 | Site measure or photos, beam and padstone design and calculations for building control |
| Rear wall opening for bi-fold or sliding doors | £2,800–£7,850 | External wall opened up to about 5 m with steel, propping, cavity tray and making good (doors supplied separately) |
| Steel beam replacement | £2,250–£6,150 | Propping, removing the failed beam, new steel on proper bearings, approval and making good |
Figures include our approximate regional adjustment for prices in the South East (+12%) and are rounded. How these figures are worked out.
Approvals in Faversham
For Faversham, building control is provided by the local council's building control team, or by a registered building control approver if preferred. We send them the engineer's calculations with a building notice or full plans application and book the inspections. Work done without approval can cause problems at sale and is far dearer to put right later.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Lintel replacement near Faversham
- Whitstable 6.7 mi
- Sittingbourne 7.0 mi
- Canterbury 8.6 mi
- Herne Bay 11.1 mi
- Ashford 11.6 mi
- Gillingham 15.5 mi
Questions about lintel replacement in Faversham
Can you work on older or listed homes in Faversham?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.
Can I stay at home while the work is done in Faversham?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.
Can a lintel be replaced without removing the window?
Often, yes. The brickwork above is propped, the old lintel is taken out and the new one fitted while the frame stays in place under protection. If the frame has been carrying weight because the old lintel sagged, it may need easing or adjusting once the new lintel is in.
How long does lintel replacement take?
Most single openings take one to two working days on site, covering propping, removing the old lintel, fitting the new one and rebuilding the brickwork. Upper-floor lintels needing scaffolding, wide bay windows, and jobs where bricks must be sourced to match can all take longer.
Do I need scaffolding to replace a lintel?
For ground-floor windows and doors, usually not, as props and a stable platform from the ground are enough. First-floor and higher openings normally need scaffolding or a tower so the brickwork can be rebuilt safely, and that cost appears as its own line in the quote.
What happens at the survey visit in Faversham?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.