Lintel replacement · Ashford
Lintel replacement in Ashford, Kent
Steelwork, approvals and making good for lintel replacement in Ashford, Kent and nearby.
- Price fixed in writing once scope is agreed
- Building control arranged
- Temporary works and making good included
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Lintel replacement in Ashford, Kent: how it works
Ashford, Kent has a mix of housing, and lintel replacement needs a slightly different approach in each. The wider Kent area is covered as well. Whatever the age of the property, the steel goes in on proper bearings with temporary support in place throughout.
A lintel is the short beam that carries the brickwork over a window or door. When it fails, the signs tend to show outside first: a crack stepping up from the corner of the frame, a dip in the brick courses, or a window that has started to bind. Timber, concrete and old steel lintels each fail in their own way, but the fix follows the same principle.
Worth knowing before you start
- The replacement is specified by a structural engineer, who looks at the opening width, the wall construction and what the lintel carries, such as floor joists, a bay roof or a gable. Solid walls and cavity walls usually call for different lintel types.
- While the old lintel is out, the brickwork above sits on adjustable steel props with needles or masonry prop heads fixed through the mortar joints. The props stand on boards or spreaders so their load is shared across the ground or floor beneath.
- Older steel lintels and bare steel angles can corrode where water sits on them. Rust takes up more room than the steel it comes from, so a corroding lintel can lift the brick course above it and open up horizontal cracks.
- Replacing a structural lintel is generally treated as building work, so approval is in place before it starts. In England, Wales and Northern Ireland that means building control, and in Scotland a building warrant is needed before structural work begins.
- A typical single lintel takes a day or two on site. Keep the building control completion certificate with your property papers, because buyers' surveyors often notice old cracking around openings and their solicitors will ask what was done about it.
Four stages, one team
Look and measure
We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.
Design and price
Calculations come back from the engineer and we confirm your fixed written price, line by line.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Fit, inspect, finish
The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.
Guide prices for lintel replacement in Ashford, Kent
As a guide, budget £450–£1,340 per lintel including VAT for lintel replacement in Ashford, Kent, based on published UK cost guides adjusted for prices in the South East (+12%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Lintel replacement | £450–£1,340 per lintel | Propping, removing the old lintel, new lintel set on beds and brickwork made good |
| Rear wall opening for bi-fold or sliding doors | £2,800–£7,850 | External wall opened up to about 5 m with steel, propping, cavity tray and making good (doors supplied separately) |
| Structural calculations for a beam | £280–£840 | Site measure or photos, beam and padstone design and calculations for building control |
| Plastering and making good | £340–£1,340 | Boxing the beam, bead and skim, reveals, floor infill where the wall stood and tidy-up |
Figures include our approximate regional adjustment for prices in the South East (+12%) and are rounded. How these figures are worked out.
Approvals in Ashford, Kent
Structural openings in English homes need building regulations approval before work starts. The local council's building control team can deal with it, or you can use a registered building control approver. Either way the steel is inspected before it is covered, and a completion certificate is issued at the end. Keep it safe for when you sell.
Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.
Lintel replacement near Ashford
- Faversham 11.6 mi
- Canterbury 12.8 mi
- Folkestone 13.5 mi
- Sittingbourne 14.8 mi
- Whitstable 16.2 mi
- Maidstone 17.5 mi
Lintel replacement in Ashford, Kent: your questions
Do you also work near Ashford, Kent?
Yes. We also cover nearby towns including Faversham, Canterbury, Folkestone and Sittingbourne.
How much does lintel replacement cost in Ashford, Kent?
As a guide, budget £450–£1,340 per lintel including VAT for lintel replacement in Ashford, Kent, based on published UK cost guides adjusted for prices in the South East (+12%). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.
Do I need scaffolding to replace a lintel?
For ground-floor windows and doors, usually not, as props and a stable platform from the ground are enough. First-floor and higher openings normally need scaffolding or a tower so the brickwork can be rebuilt safely, and that cost appears as its own line in the quote.
How long does lintel replacement take?
Most single openings take one to two working days on site, covering propping, removing the old lintel, fitting the new one and rebuilding the brickwork. Upper-floor lintels needing scaffolding, wide bay windows, and jobs where bricks must be sourced to match can all take longer.
What type of lintel will be fitted?
The engineer decides, based on the opening width, the wall construction and the load above. Steel lintels are common in cavity walls, while solid walls or wide openings may suit a different type or a steel section. We fit what the specification calls for rather than a one-size option.
What happens at the survey visit in Ashford, Kent?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.