Garage conversion openings · Surrey
Garage conversion openings in Surrey
Garage conversion openings across Surrey, designed by a structural engineer and signed off by building control.
- Survey, design and installation in one
- Covering CR3, CR6, GU1, GU10
- Inspected before it is covered
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
About our garage conversion openings service in Surrey
Garage conversion openings are the structural changes that turn a garage into living space: infilling the garage door opening with a wall and window, and often forming a new opening between the garage and the house. The existing lintel or beam over the garage door is checked, and any new steel is sized by a structural engineer.
We carry out garage conversion openings throughout Surrey, for homeowners, landlords and builders who need the structural part done properly. We can survey in places such as Woking, Staines and Banstead and the villages around them. You get an itemised written quote that shows the calculations, approvals, steel, labour and finishing as separate lines.
Key points for your project
- Forming a doorway from the house into the converted garage often goes through a load-bearing wall, especially the original external wall of the house where the garage is attached. That opening needs a lintel or beam designed by the engineer.
- The beam or lintel over a garage door was designed to span an open gap. It may be timber, concrete or steel, and in older houses it can be undersized or corroded, so the engineer checks it before anything is built underneath or above it.
- The structural part of a garage conversion, covering the infill foundation, the wall and any new opening, typically takes one to two weeks. The full conversion with insulation, electrics, plastering and flooring takes longer, depending on the scope.
- The price depends on whether the garage door beam needs replacing, the foundation needed for the infill, whether a new opening is formed into the house, the brick or cladding finish, and any fire separation work that has to be kept or added.
- The infill wall facing the street is the part everyone sees. Bricks and mortar are matched to the house as closely as possible, or the panel is rendered or clad, and the new window is aligned with the others on the front elevation.
Four stages, one team
Free visit
A short visit to Surrey to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
Guide prices for garage conversion openings in Surrey
As a guide, budget £1,100–£3,350 including VAT for garage door opening infill (structural part) in Surrey, based on published UK cost guides adjusted for prices in the South East (+12%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Garage door opening infill (structural part) | £1,100–£3,350 | Beam or lintel checked or replaced, foundation and infill wall for the old door opening (window and finishes extra) |
| Widening an internal doorway | £1,100–£2,800 | Opening widened with a new lintel or short beam, approval where structural, and making good |
| Steel beam replacement | £2,250–£6,150 | Propping, removing the failed beam, new steel on proper bearings, approval and making good |
| RSJ supply and fit (single beam) | £900–£2,800 per beam | Beam supplied, delivered, lifted and packed on padstones, with propping (calculations and approval priced separately) |
Figures include our approximate regional adjustment for prices in the South East (+12%) and are rounded. How these figures are worked out.
Building rules for Surrey
For Surrey, building control is provided by the local council's building control team, or by a registered building control approver if preferred. We send them the engineer's calculations with a building notice or full plans application and book the inspections. Work done without approval can cause problems at sale and is far dearer to put right later.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Local questions answered
Do you cover Surrey for garage conversion openings?
Yes. We carry out garage conversion openings in Surrey. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.
Can I stay at home while the work is done in Surrey?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.
Can I knock through from my garage into the kitchen?
Usually, yes. The wall between an attached or integral garage and the house is often load-bearing, so the opening needs a lintel or steel beam designed by a structural engineer and approved by building control. If any of the garage stays as storage, the opening needs fire separation, such as a fire door.
Do I need planning permission to convert my garage?
Often not, because a garage conversion is largely internal work within permitted development. However, some newer estates have planning conditions that remove permitted development rights for garages, and listed buildings, flats and some front elevation changes need consent. Check your property's planning history with the council before committing.
Is my garage floor suitable for a living room?
Rarely as it stands. Garage floors are often lower than the house, may slope towards the door and usually lack insulation and a damp-proof membrane. The floor is normally built up with a membrane, insulation and screed or a timber floor to meet the house level and the building regulations.
What paperwork will I get when the conversion is done?
You should receive the engineer's calculations, a building control completion certificate for the conversion, and certificates for any electrical or gas work. Keep these together, as buyers' solicitors ask for evidence that a garage conversion was approved, especially where a garage has become a bedroom or living space.
Can you work on older or listed homes in Surrey?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.