Garage conversion openings · Andover
Garage conversion openings in Andover
Garage conversion openings for homes in SP10, SP11, designed by a structural engineer.
- Price fixed in writing once scope is agreed
- Building control arranged
- Temporary works and making good included
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
What garage conversion openings involve in Andover
Our garage conversion openings service in Andover covers everything from the first visit to the completion paperwork. We also cover the surrounding towns and villages in Hampshire. Postcode districts we cover here include SP10 and SP11.
Converting a garage is a popular way to add a room without extending. Structurally, two things usually happen: the big garage door opening is filled in with a wall, window or door on proper foundations, and a doorway or wider opening is formed through the wall between the garage and the house.
Things to plan for
- Garage floors often sit lower than the house floor and may have no damp-proof membrane. The infill wall needs a damp-proof course linked to the existing walls, and the floor usually needs a membrane, insulation and screed raised to the house level.
- An integral garage is usually separated from the house by fire-resisting construction. If part of it stays as a garage or store, that separation must be kept, and any new door between garage and house normally needs to be a fire door.
- Garages built before 2000 can contain asbestos cement in roof sheets, wall panels or the garage door itself. A survey of the materials being disturbed is needed before work starts, so any asbestos can be removed or managed correctly.
- The price depends on whether the garage door beam needs replacing, the foundation needed for the infill, whether a new opening is formed into the house, the brick or cladding finish, and any fire separation work that has to be kept or added.
- The structural part of a garage conversion, covering the infill foundation, the wall and any new opening, typically takes one to two weeks. The full conversion with insulation, electrics, plastering and flooring takes longer, depending on the scope.
What happens, step by step
Look and measure
We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.
Design and price
Calculations come back from the engineer and we confirm your fixed written price, line by line.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Fit, inspect, finish
The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.
What do garage conversion openings cost in Andover?
As a guide, budget £1,100–£3,350 including VAT for garage door opening infill (structural part) in Andover, based on published UK cost guides adjusted for prices in the South East (+12%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Garage door opening infill (structural part) | £1,100–£3,350 | Beam or lintel checked or replaced, foundation and infill wall for the old door opening (window and finishes extra) |
| Structural calculations for a beam | £280–£840 | Site measure or photos, beam and padstone design and calculations for building control |
| Steel beam replacement | £2,250–£6,150 | Propping, removing the failed beam, new steel on proper bearings, approval and making good |
| Building control fees | £280–£730 | Building notice or full plans fee and inspections; varies by council or approver |
Figures include our approximate regional adjustment for prices in the South East (+12%) and are rounded. How these figures are worked out.
Building rules for Andover
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.
Garage conversion openings near Andover
- Winchester 12.6 mi
- Newbury 15.0 mi
- Salisbury 16.4 mi
- Thatcham 16.7 mi
- Basingstoke 18.0 mi
- Eastleigh 18.0 mi
Local questions answered
Can you work on older or listed homes in Andover?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.
What happens at the survey visit in Andover?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.
Do I need a steel beam for a garage conversion?
Not always. If the existing beam over the garage door is sound and the infill wall sits on its own foundation, new steel may not be needed. Steel is usually required when forming an opening through a load-bearing wall into the house, or when the garage door beam is undersized or corroded. The engineer decides.
Is my garage floor suitable for a living room?
Rarely as it stands. Garage floors are often lower than the house, may slope towards the door and usually lack insulation and a damp-proof membrane. The floor is normally built up with a membrane, insulation and screed or a timber floor to meet the house level and the building regulations.
Can I knock through from my garage into the kitchen?
Usually, yes. The wall between an attached or integral garage and the house is often load-bearing, so the opening needs a lintel or steel beam designed by a structural engineer and approved by building control. If any of the garage stays as storage, the opening needs fire separation, such as a fire door.
Do you cover Andover for garage conversion openings?
Yes. We carry out garage conversion openings in Andover and the SP10 and SP11 postcode districts. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.