Flat & HMO conversion steels · Exeter
Flat & HMO conversion steels in Exeter
Flat & HMO conversion steels for homes in EX1, EX2, EX4, designed by a structural engineer.
- Survey, design and installation in one
- Covering EX1, EX2, EX4
- Inspected before it is covered
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Planning flat & HMO conversion steels in Exeter
If you live in Exeter, flat & HMO conversion steels can usually be planned and priced after a single survey visit. The wider Devon area is covered as well. We cover EX1, EX2 and EX4, and we fix the price in writing once the layout and scope are agreed.
Turning a large house into flats or an HMO rarely leaves every wall where it was. Rooms are split and joined, kitchens and bathrooms appear on upper floors, and new stairs or corridors are formed. Each time a load-bearing wall moves, steel usually takes its place, and it has to suit the fire and sound standards of a building shared by several households.
Key points for your project
- Many HMOs need a licence from the local council, with conditions covering room sizes, shared facilities and fire safety. Licensing runs alongside building regulations rather than replacing them, so the layout and steelwork should suit both from the outset.
- A conversion to flats or an HMO may need planning permission for the change of use, depending on the scheme, its size and any local restrictions. Checking the planning position before design work begins avoids redesigning the layout and its steel later.
- Floors and walls between flats must resist the spread of fire, and steel holding up those floors needs protection to match. Where a beam passes through a separating wall or floor, the gaps around it are fire-stopped so the separation stays continuous.
- Costs reflect how many walls move, the number of beams and columns, access for lifting steel to upper floors, the fire period required, phasing around other trades and whether existing foundations can take the new concentrated loads.
- Keep the structural calculations, building control completion certificate and fire protection records together in one place. They are needed for signing off the conversion, and buyers, lenders and licensing officers may ask to see them later.
How the job runs in Exeter
Survey in Exeter
We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.
Engineer's design
A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Install and sign-off
Props go in, the opening is formed, the steel is set and packed, building control inspects it, and we make good.
How much should I budget in Exeter?
As a guide, budget £2,600–£9,250 including VAT for steelwork for a flat or HMO conversion in Exeter, based on published UK cost guides adjusted for prices in the South West (+3%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Steelwork for a flat or HMO conversion | £2,600–£9,250 | Beams and posts for a revised layout, with approvals; fire and sound separation priced with the conversion |
| Load-bearing wall removal with steel beam | £2,050–£5,150 | Typical internal wall up to about 4 m: calculations, building control, propping, steel, padstones, fitting, fire protection and making good |
| Building control fees | £260–£670 | Building notice or full plans fee and inspections; varies by council or approver |
| Structural calculations for a beam | £260–£770 | Site measure or photos, beam and padstone design and calculations for building control |
Figures include our approximate regional adjustment for prices in the South West (+3%) and are rounded. How these figures are worked out.
Building rules for Exeter
Structural openings in English homes need building regulations approval before work starts. The local council's building control team can deal with it, or you can use a registered building control approver. Either way the steel is inspected before it is covered, and a completion certificate is issued at the end. Keep it safe for when you sell.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Local questions answered
Do you cover Exeter for flat & HMO conversion steels?
Yes. We carry out flat & HMO conversion steels in Exeter and the EX1, EX2 and EX4 postcode districts. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.
Can I stay at home while the work is done in Exeter?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.
Does 5% VAT apply to a flat conversion?
It may. A reduced rate of VAT can apply to some conversion work, such as changing the number of dwellings in a building or converting a house into an HMO, provided the conditions are met. The rules have detail and exceptions, so confirm the position with your accountant before pricing the project on that basis.
Does steel in a flat conversion need fire protection?
Yes, in almost all cases. Steel holding up floors that separate flats, or supporting escape routes, needs fire resistance to the period the scheme requires, which can be higher than in a single house. It is usually boxed with fire-rated board or coated with intumescent paint, and building control inspects it before handover.
How is sound insulation handled around steel beams in flats?
Through careful detailing. Separating floors and walls between flats must meet sound insulation standards, so steel connections, boxing and packing are designed not to leave gaps or create direct paths for noise. In England and Wales, sound testing is normally carried out on conversions before completion to show the separating construction performs.
How soon can flat & HMO conversion steels start in Exeter?
Start dates depend on the engineer's calculations, the building control approval and, where needed, party wall notice periods. We give you a realistic timetable after the survey and keep you updated as each approval comes through.