Flat & HMO conversion steels · Aberdeen
Flat & HMO conversion steels in Aberdeen
Flat & HMO conversion steels across Aberdeen, designed by a structural engineer and built under a building warrant.
- Itemised written quote
- Beam sized by a structural engineer
- Covering Aberdeen and nearby
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
About our flat & HMO conversion steels service in Aberdeen
Flat and HMO conversion steels are the beams, columns and frames needed when a house or building is reworked into self-contained flats or a house in multiple occupation. New layouts move walls, stairs and bathrooms, so steel picks up the loads that old walls used to carry, designed to work alongside the fire separation and sound insulation the conversion also needs.
Homes across Aberdeen range from Victorian terraces to post-war semis and newer estates, and flat & HMO conversion steels look different in each. We cover the whole area, from the centre out to the suburbs. We plan the steel, the temporary support and the approvals around the building, then fix the price in writing once the scope is agreed.
What to expect
- Keep the structural calculations, building standards completion certificate and fire protection records together in one place. They are needed for signing off the conversion, and buyers, lenders and licensing officers may ask to see them later.
- In a conversion, walls that carried load are often taken out to form open kitchens or wider corridors, while new partitions go in elsewhere. Each change is checked, because a new stud wall standing on old joists can add load the floor was never designed for.
- The reduced 5% rate of VAT may apply to some conversion work, such as changing the number of dwellings in a building. Whether it applies depends on the details of the scheme, so confirm the position with your accountant before relying on it.
- Many HMOs need a licence from the local council, with conditions covering room sizes, shared facilities and fire safety. Licensing runs alongside building regulations rather than replacing them, so the layout and steelwork should suit both from the outset.
- Large Victorian and Edwardian houses are popular for conversion, but they bring timber lintels, chimney breasts, lime mortar and joists notched for old services. These are uncovered early so the engineer can account for them before any steel is ordered.
What happens, step by step
Survey in Aberdeen
We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.
Engineer's design
A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.
Building warrant
A building warrant is applied for from Aberdeen City Council, and work starts only once the warrant has been granted.
Install and sign-off
Props go in, the opening is formed, the steel is set and packed, building standards inspects it, and we make good.
Guide prices for flat & HMO conversion steels in Aberdeen
As a guide, budget £2,300–£8,200 including VAT for steelwork for a flat or HMO conversion in Aberdeen, based on published UK cost guides adjusted for prices in Scotland (-9%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Steelwork for a flat or HMO conversion | £2,300–£8,200 | Beams and posts for a revised layout, with approvals; fire and sound separation priced with the conversion |
| Fire protection to a steel beam | £140–£550 per beam | Fire-rated board boxing or an intumescent coating system as specified |
| Building warrant fee | £215–£435 | Statutory fee set by the estimated value of the work: £215 up to £5,000, rising on a sliding scale (fees from 1 April 2026) |
| Steel column or post | £460–£1,360 per column | Column supplied and fitted with base and cap plates on a pad foundation |
Figures include our approximate regional adjustment for prices in Scotland (-9%) and are rounded. How these figures are worked out.
Approvals in Aberdeen
In Scotland, structural alterations need a building warrant under the Building (Scotland) Act 2003, and work must not start until the warrant is granted. For Aberdeen, warrants are handled by Aberdeen City Council's building standards service. When the work is finished, a completion certificate is submitted and has to be accepted by the council.
Scotland has no Party Wall Act. Work affecting a shared wall is governed by your title deeds and the general law, and in flats by the Tenements (Scotland) Act 2004, so it is sensible to agree the work with neighbours in writing before starting.
More in Aberdeen
Local questions answered
Can I stay at home while the work is done in Aberdeen?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.
Do I need a party wall agreement for flat & HMO conversion steels in Aberdeen?
There is no Party Wall Act in Scotland. Your title deeds and the general law apply instead, and the Tenements (Scotland) Act 2004 for flats, so agree the work with your neighbour in writing before it starts.
Does steel in a flat conversion need fire protection?
Yes, in almost all cases. Steel holding up floors that separate flats, or supporting escape routes, needs fire resistance to the period the scheme requires, which can be higher than in a single house. It is usually boxed with fire-rated board or coated with intumescent paint, and building standards inspects it before handover.
Do I need freeholder consent to put a steel beam in my flat?
Usually, yes. If you own a leasehold flat, structural alterations normally need the freeholder's or landlord's written consent under the lease. In Scotland, the title deeds and the Tenements (Scotland) Act 2004 govern work affecting shared parts of the building. We can provide the calculations and drawings needed to support a consent request.
Do I need an HMO licence before converting a house?
Possibly. Many HMOs need a licence from the local council, and some areas license smaller HMOs too. Licensing covers room sizes, amenities and fire safety, and it is separate from planning and building regulations. Check the council's requirements early, as they can affect the layout and therefore the steelwork needed.
Do I need planning permission to convert a house into an HMO?
You may, depending on the size of the HMO, where it is and any local restrictions. In some areas smaller HMOs can be formed without a planning application, while larger ones, and conversions into self-contained flats, usually need permission. Check with the local planning authority before committing to a layout and its steelwork.
What happens at the survey visit in Aberdeen?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.