Steel BeamInstallers
Basement conversion with steel beams and a steel column on a concrete floor

Basement & cellar steels · Chippenham

Basement & cellar steels in Chippenham

Steelwork, approvals and making good for basement & cellar steels in Chippenham and nearby.

  • Itemised written quote
  • Beam sized by a structural engineer
  • Covering Chippenham and nearby

Free survey in Chippenham

Tell us about the basement & cellar steel job in Chippenham.

Please enter your name.
Please enter a UK phone number.
Please enter a valid email.
Please enter a UK postcode.
Please tell us a little about the job.
  • Free survey visit
  • Engineer's calculations arranged
  • Building control handled
  • Fixed written price once scope is agreed
  • England, Wales, mainland Scotland & NI

About our basement & cellar steels service in Chippenham

Planning basement & cellar steels in Chippenham? Our team covers SN14 and SN15 and the streets around them. Chippenham is around 11.8 miles from Bath, and we cover both. You get one written quote for the calculations, approvals, propping, steel and making good.

Turning a cellar into a habitable room, or digging a new basement, nearly always means moving or removing walls that hold up the rest of the house. Steel beams and columns take over that support, often while the existing walls are being deepened by underpinning and the space is protected against water.

Things to plan for

  • Underpinning deepens the existing foundations so walls can go lower, and a specialist carries it out in a strict bay-by-bay sequence. Steelwork has to fit around that sequence, which is why the engineer plans the two together from the start.
  • Cellars often house gas meters, the incoming water main, the electricity supply and old drainage. These are mapped before work starts, gas work must by law be done by a Gas Safe registered engineer, and the electricity network operator may need to move a supply.
  • Basements can stay damp even with waterproofing in place, so steel used below ground is protected against corrosion as the engineer specifies. That might mean an upgraded paint system or galvanising, particularly where steel sits close to external walls.
  • In terraced and semi-detached homes, basement work nearly always affects shared walls. Excavating near a neighbour's foundations and underpinning a party wall are both notifiable under the Party Wall etc. Act 1996 in England and Wales.
  • Below-ground rooms need a waterproofing design, often a cavity drain membrane, a tanking system or both. Column bases and beam bearings that pass through the waterproofing are detailed so they do not become a route for water.

How the job runs in Chippenham

  1. Free visit

    A short visit to Chippenham to see the job, agree what you want and check the bearings, floors and services that affect the design.

  2. Calculations

    The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.

  3. Building control

    We submit a building notice or full plans application to Wiltshire Council, so approval is in place before the wall is touched.

  4. Steel in, made good

    On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.

Guide prices for basement & cellar steels in Chippenham

As a guide, budget £2,600–£6,700 including VAT for basement or cellar steelwork in Chippenham, based on published UK cost guides adjusted for prices in the South West (+3%).

JobTypical guide rangeWhat it usually covers
Basement or cellar steelwork£2,600–£6,700Beams and columns with pad foundations under the floor above (excavation and waterproofing extra)
Steel column or post£520–£1,540 per columnColumn supplied and fitted with base and cap plates on a pad foundation
Fire protection to a steel beam£150–£620 per beamFire-rated board boxing or an intumescent coating system as specified
Building control fees£260–£670Building notice or full plans fee and inspections; varies by council or approver

Figures include our approximate regional adjustment for prices in the South West (+3%) and are rounded. How these figures are worked out.

Approvals in Chippenham

In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either Wiltshire Council or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.

Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.

Building rules in England

Basement & cellar steels near Chippenham

Questions about basement & cellar steels in Chippenham

Do you cover Chippenham for basement & cellar steels?

Yes. We carry out basement & cellar steels in Chippenham and the SN14 and SN15 postcode districts. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.

Can I stay at home while the work is done in Chippenham?

Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.

Will columns be needed in my basement?

Quite often. Below ground there may be no suitable wall to support the end of a beam, so a column carries the load down to a foundation. The position can usually be agreed with you at design stage so the column sits within a wall line, a kitchen island or a storage area.

Do I need planning permission to convert a cellar?

Converting an existing cellar into living space usually does not need planning permission if the outside of the house is unchanged, though listed buildings need consent. Digging a new basement, extending under the garden or adding lightwells may need planning permission, and building regulations approval is needed either way.

How long does it take to fit steels in a basement?

Each stage of steelwork usually takes a few days, but it happens at several points through a basement project rather than all at once. The overall programme is set by the excavation, underpinning and waterproofing, and the steel is installed whenever the sequence reaches it.

Planning to take a wall out?

Book a free survey visit. You get an itemised written quote covering calculations, building control, steel and making good.