Basement & cellar steels · Shirley
Basement & cellar steels in Shirley
Steelwork, approvals and making good for basement & cellar steels in Shirley and nearby.
- Survey, design and installation in one
- Covering B90, B91, B92
- Inspected before it is covered
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
What basement & cellar steels involve in Shirley
Our basement & cellar steels service in Shirley covers everything from the first visit to the completion paperwork. We also work in nearby Solihull, roughly 1.6 miles away. Postcode districts we cover here include B90, B91 and B92.
Underpinning and waterproofing are specialist trades, and we coordinate the steelwork with them rather than replacing them. Our part is the engineer's steel design, building control, temporary propping, and fitting the beams, columns and base plates at the right point in the dig, so the structure is sound before finishes go in.
Worth knowing before you start
- Victorian and Edwardian cellars often have shallow brick walls, vaulted coal stores extending under the front garden or pavement, and little or no damp protection. The engineer checks whether vaults and walls can stay and what new support they need.
- Basement steel frames often rely on columns because there is nowhere else to land the load. Each column sits on its own foundation or a thickened part of the slab, and its position needs agreeing early so it does not end up in the middle of a room.
- Underpinning deepens the existing foundations so walls can go lower, and a specialist carries it out in a strict bay-by-bay sequence. Steelwork has to fit around that sequence, which is why the engineer plans the two together from the start.
- A basement room needs a safe way out in a fire, which affects the stair, the doors and sometimes an escape window into a lightwell. Steel in the basement ceiling also commonly needs fire protection to the standard building control asks for.
- Below-ground rooms need a waterproofing design, often a cavity drain membrane, a tanking system or both. Column bases and beam bearings that pass through the waterproofing are detailed so they do not become a route for water.
Four stages, one team
Free visit
A short visit to Shirley to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building control
We submit a building notice or full plans application to Solihull Council, so approval is in place before the wall is touched.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
How much should I budget in Shirley?
As a guide, budget £2,500–£6,500 including VAT for basement or cellar steelwork in Shirley, based on published UK cost guides adjusted for prices in the West Midlands (no adjustment).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Basement or cellar steelwork | £2,500–£6,500 | Beams and columns with pad foundations under the floor above (excavation and waterproofing extra) |
| Temporary works and propping | £150–£500 | Props, spreaders, needles and sole plates for a typical opening, installed and struck |
| Fire protection to a steel beam | £150–£600 per beam | Fire-rated board boxing or an intumescent coating system as specified |
| Steel column or post | £500–£1,500 per column | Column supplied and fitted with base and cap plates on a pad foundation |
Figures include our approximate regional adjustment for prices in the West Midlands (no adjustment) and are rounded. How these figures are worked out.
Building rules for Shirley
For Shirley, building control is provided by Solihull Council, or by a registered building control approver if preferred. We send them the engineer's calculations with a building notice or full plans application and book the inspections. Work done without approval can cause problems at sale and is far dearer to put right later.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Basement & cellar steels near Shirley
- Solihull 1.6 mi
- Acocks Green 2.7 mi
- Birmingham 5.9 mi
- Aston 6.7 mi
- Bartley Green 7.7 mi
- Smethwick 8.4 mi
Basement & cellar steels in Shirley: your questions
Can you work on older or listed homes in Shirley?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.
Can I stay at home while the work is done in Shirley?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.
Will columns be needed in my basement?
Quite often. Below ground there may be no suitable wall to support the end of a beam, so a column carries the load down to a foundation. The position can usually be agreed with you at design stage so the column sits within a wall line, a kitchen island or a storage area.
What paperwork will I get for basement steelwork?
You should end up with the engineer's calculations and drawings, the building control completion certificate, the waterproofing details and, where it applied, the party wall paperwork. Keep them together, as surveyors and solicitors usually ask for them when the property is sold or remortgaged.
How is steel protected from damp in a basement?
Steel below ground is protected against corrosion as the engineer specifies, which may mean a heavier-duty paint system or galvanising. It is also kept on the dry side of the waterproofing where possible, and fixings through the waterproofing are detailed so they do not let water in.
How much do basement & cellar steels cost in Shirley?
As a guide, budget £2,500–£6,500 including VAT for basement or cellar steelwork in Shirley, based on published UK cost guides adjusted for prices in the West Midlands (no adjustment). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.