Areas · Northern Ireland
Steel beam installers in Armagh City, Banbridge and Craigavon
Load-bearing walls, knock-throughs, openings and steelwork across Armagh City, Banbridge and Craigavon, with calculations and approvals arranged.
- Free survey visit in Armagh City, Banbridge and Craigavon
- Engineer's calculations arranged
- Building control handled for you
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Steel beam work in Armagh City, Banbridge and Craigavon
We fit steel beams and RSJs across Armagh City, Banbridge and Craigavon: load-bearing wall removal, knock-throughs, chimney breasts, openings for extensions and bi-folds, loft and basement steels. We can survey in places such as Portadown, Banbridge and Craigavon and the villages around them. Every job includes calculations from a structural engineer and the right approval for Northern Ireland.
Building control for Armagh City, Banbridge and Craigavon is run by the council under the Building Regulations (Northern Ireland) 2012. There is no Party Wall Act in Northern Ireland.
Services in Armagh City, Banbridge and Craigavon
Wall removal & knock-throughs
- Load-bearing wall removal
- Kitchen-diner knock-throughs
- Through-lounge knock-throughs
- Chimney breast removal
New & wider openings
- Wider doorways & openings
- Bi-fold & sliding door openings
- Garage conversion openings
- Lintel replacement
Extensions, lofts & basements
Beams, frames & columns
Design & approvals
Site works & commercial
Guide prices in Armagh City, Banbridge and Craigavon
As a guide, budget £1,700–£4,300 including VAT for load-bearing wall removal with steel beam in Armagh City, Banbridge and Craigavon, based on published UK cost guides adjusted for prices in Northern Ireland (-14%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Load-bearing wall removal with steel beam | £1,700–£4,300 | Typical internal wall up to about 4 m: calculations, building control, propping, steel, padstones, fitting, fire protection and making good |
| Chimney breast removal (ground floor) | £1,300–£2,600 | Ground-floor breast removed, steel to support the breast above, building control and making good |
| Rear wall opening for bi-fold or sliding doors | £2,150–£6,000 | External wall opened up to about 5 m with steel, propping, cavity tray and making good (doors supplied separately) |
| Loft conversion steels | £2,150–£5,150 | Supply and fit of floor and ridge steels on padstones, including lifting into the roof space |
| Structural calculations for a beam | £220–£640 | Site measure or photos, beam and padstone design and calculations for building control |
Figures include our approximate regional adjustment for prices in Northern Ireland (-14%) and are rounded. How these figures are worked out.
Building rules in Armagh City, Banbridge and Craigavon
In Northern Ireland, structural work comes under the Building Regulations (Northern Ireland) 2012 and is approved by the local council's building control. For Armagh City, Banbridge and Craigavon that is Armagh City, Banbridge and Craigavon Borough Council. We submit a full plans application or building notice before work starts and book the inspections.
The Party Wall etc. Act does not extend to Northern Ireland. Shared walls are dealt with under your title and the general law, so we recommend agreeing access and the work with your neighbour before it starts.
Steel beams in Armagh City, Banbridge and Craigavon: questions
Can I stay at home while the work is done in Armagh City, Banbridge and Craigavon?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.
Can you work on older or listed homes in Armagh City, Banbridge and Craigavon?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.
Who approves steel beam installation in Armagh City, Banbridge and Craigavon?
Structural work in Armagh City, Banbridge and Craigavon needs a full plans application or building notice to Armagh City, Banbridge and Craigavon Borough Council. We prepare and submit it with the structural engineer's calculations and arrange the inspections, so the completion paperwork follows the job.
Which towns in Armagh City, Banbridge and Craigavon do you cover?
We cover towns including Craigavon, Portadown and Banbridge, plus the villages and smaller towns around them.
How much does steel beam installation cost in Armagh City, Banbridge and Craigavon?
As a guide, budget £1,700–£4,300 including VAT for load-bearing wall removal with steel beam in Armagh City, Banbridge and Craigavon, based on published UK cost guides adjusted for prices in Northern Ireland (-14%). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.