Wider doorways & openings · Somerset
Wider doorways & openings in Somerset
Wider doorways & openings across Somerset, designed by a structural engineer and signed off by building control.
- Free survey visit in Somerset
- Engineer's calculations arranged
- Building control handled for you
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Wider doorways & openings in Somerset: how it works
Wider doorways and openings are gaps formed or enlarged in internal walls, with a lintel or steel beam carrying the masonry and loads above. They sit between a simple door change and a full wall removal: the span is shorter, but each opening still needs the right support and approval if the wall is structural.
Across Somerset, wider doorways & openings usually come up when people want more light, a better layout or a way through to a new extension. We can survey in places such as Bridgwater, Clevedon and Burnham-on-Sea and the villages around them. Whatever the reason, the beam is sized from calculations and the work is inspected before anything is covered.
Worth knowing before you start
- In hallways, a new or wider opening into the living room can affect the protected route from the stairs to the front door. Building control may require fire doors, smoke alarms or other measures, especially in houses with three or more storeys.
- For a modest increase in width, a lintel may be all that is needed, while a wider opening carrying a floor or wall usually needs steel. The engineer chooses the type and size from the actual loads, never from the opening width alone.
- Older door surrounds and walls can hide asbestos in textured coatings, insulating board above doors or panelling. In buildings built before 2000 it must be identified before the wall is cut, so a refurbishment survey of the area is arranged where there is a risk.
- Widening a single doorway in a load-bearing wall usually takes one to two days for the structural work. The plaster then needs time to dry before the door linings are decorated or a new door is hung.
- Forming or widening an opening in a load-bearing wall is building work needing building regulations approval in England and Wales. In Scotland a building warrant is required before work starts, and in Northern Ireland an application is made to the council's building control.
What happens, step by step
Look and measure
We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.
Design and price
Calculations come back from the engineer and we confirm your fixed written price, line by line.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Fit, inspect, finish
The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.
What do wider doorways & openings cost in Somerset?
As a guide, budget £1,050–£2,600 including VAT for widening an internal doorway in Somerset, based on published UK cost guides adjusted for prices in the South West (+3%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Widening an internal doorway | £1,050–£2,600 | Opening widened with a new lintel or short beam, approval where structural, and making good |
| Plastering and making good | £310–£1,240 | Boxing the beam, bead and skim, reveals, floor infill where the wall stood and tidy-up |
| RSJ supply and fit (single beam) | £820–£2,580 per beam | Beam supplied, delivered, lifted and packed on padstones, with propping (calculations and approval priced separately) |
| Lintel replacement | £410–£1,240 per lintel | Propping, removing the old lintel, new lintel set on beds and brickwork made good |
Figures include our approximate regional adjustment for prices in the South West (+3%) and are rounded. How these figures are worked out.
Building rules for Somerset
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.
Wider doorways & openings by town
Questions about wider doorways & openings in Somerset
How much do wider doorways & openings cost in Somerset?
As a guide, budget £1,050–£2,600 including VAT for widening an internal doorway in Somerset, based on published UK cost guides adjusted for prices in the South West (+3%). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.
Do I need a party wall agreement for wider doorways & openings in Somerset?
Yes, if the beam bears into a shared wall: the Party Wall etc. Act 1996 applies in England and Wales, and a party structure notice must be served at least two months before that work starts. We arrange it through a party wall surveyor.
Will widening a doorway make a mess?
There is some dust and noise, mainly on the day the opening is cut. We screen the area, protect floors along the route and use dust extraction on saws where possible. Rooms either side are affected for a day or two, while the rest of the house stays in normal use.
What if there is a radiator or switch where the new opening goes?
It gets moved before the opening is cut. Radiators and pipework are relocated by a heating engineer, and switches and sockets by an electrician, with notifiable electrical work in England meeting Part P. These items are priced separately in the quote, so you can see what each one adds.
Do I need building regulations to widen an internal door?
Only if the wall is load-bearing or the change affects fire safety, such as the escape route from upstairs. Widening an opening in a non-structural stud partition usually does not need structural approval. We confirm which applies at the survey, and handle the building control application or notice where it is needed.
Is a lintel or a steel beam needed for a wider door?
It depends on the loads. A lintel can be enough for a modest widening under light loads, while an opening carrying floor joists or a wall above usually needs steel. The engineer decides from the actual loads and span rather than the width alone, and we fit whichever is specified.
What happens at the survey visit in Somerset?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.