Steel BeamInstallers
Hallway doorway widened into a larger opening with a new lintel before plastering

Wider doorways & openings · Thamesmead

Wider doorways & openings in Thamesmead

Steelwork, approvals and making good for wider doorways & openings in Thamesmead and nearby.

  • Itemised written quote
  • Beam sized by a structural engineer
  • Covering Thamesmead and nearby

Free survey in Thamesmead

Tell us about the wider doorways & opening job in Thamesmead.

Please enter your name.
Please enter a UK phone number.
Please enter a valid email.
Please enter a UK postcode.
Please tell us a little about the job.
  • Free survey visit
  • Engineer's calculations arranged
  • Building control handled
  • Fixed written price once scope is agreed
  • England, Wales, mainland Scotland & NI

Planning wider doorways & openings in Thamesmead

Thamesmead has a mix of housing, and wider doorways & openings need a slightly different approach in each. The wider London area is covered as well. Whatever the age of the property, the steel goes in on proper bearings with temporary support in place throughout.

Not every layout change needs a whole wall out. Widening a cramped doorway, adding a second door into a room or forming a wide opening between hall and living room can change how a home flows while keeping most of the wall, along with its storage space and furniture positions.

Things to plan for

  • Each side of the new opening needs enough solid wall for the lintel or beam to sit on. If the opening runs close to a corner, another doorway or a chimney breast, there may not be enough masonry, and a column or padstone may be required.
  • In hallways, a new or wider opening into the living room can affect the protected route from the stairs to the front door. Building control may require fire doors, smoke alarms or other measures, especially in houses with three or more storeys.
  • Widening doorways is a frequent adaptation for wheelchair users and people using walking frames. Where a council grant or adaptation scheme is helping to pay, check its requirements for clear opening width before the opening is designed.
  • Standard internal doors come in set widths, so it makes sense to size the opening to suit an off-the-shelf door and lining. Odd sizes need made-to-measure doors and linings, which take longer to arrange.
  • Widening a single doorway in a load-bearing wall usually takes one to two days for the structural work. The plaster then needs time to dry before the door linings are decorated or a new door is hung.

How the job runs in Thamesmead

  1. Look and measure

    We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.

  2. Design and price

    Calculations come back from the engineer and we confirm your fixed written price, line by line.

  3. Building control

    We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.

  4. Fit, inspect, finish

    The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.

How much should I budget in Thamesmead?

As a guide, budget £1,300–£3,200 including VAT for widening an internal doorway in Thamesmead, based on published UK cost guides adjusted for London prices (+28%).

JobTypical guide rangeWhat it usually covers
Widening an internal doorway£1,300–£3,200Opening widened with a new lintel or short beam, approval where structural, and making good
RSJ supply and fit (single beam)£1,000–£3,200 per beamBeam supplied, delivered, lifted and packed on padstones, with propping (calculations and approval priced separately)
Load-bearing wall removal with steel beam£2,550–£6,400Typical internal wall up to about 4 m: calculations, building control, propping, steel, padstones, fitting, fire protection and making good
Lintel replacement£510–£1,540 per lintelPropping, removing the old lintel, new lintel set on beds and brickwork made good

Figures include our approximate regional adjustment for London prices (+28%) and are rounded. How these figures are worked out.

Approvals in Thamesmead

In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.

If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.

Building rules in England

Wider doorways & openings near Thamesmead

Local questions answered

What happens at the survey visit in Thamesmead?

We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.

Do you cover Thamesmead for wider doorways & openings?

Yes. We carry out wider doorways & openings in Thamesmead and the DA16, DA17, DA18, IG11 and RM9 postcode districts. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.

Can I widen a doorway in a load-bearing wall?

Yes. The extra width is spanned by a lintel or steel beam that a structural engineer specifies, sitting on solid bearings either side. Because the wall is structural, the work needs building control approval in England and Wales, a building warrant in Scotland, or a council building control application in Northern Ireland. We arrange the design and approval.

What if there is a radiator or switch where the new opening goes?

It gets moved before the opening is cut. Radiators and pipework are relocated by a heating engineer, and switches and sockets by an electrician, with notifiable electrical work in England meeting Part P. These items are priced separately in the quote, so you can see what each one adds.

How wide can I make a doorway?

That depends on the wall, what it carries and how much solid wall is left at each side for the support to bear on, and a structural engineer sets the limit. Many people go from a single door to a double-width opening, and beyond that the job starts to become a partial wall removal.

How soon can wider doorways & openings start in Thamesmead?

Start dates depend on the engineer's calculations, the building control approval and, where needed, party wall notice periods. We give you a realistic timetable after the survey and keep you updated as each approval comes through.

Planning to take a wall out?

Book a free survey visit. You get an itemised written quote covering calculations, building control, steel and making good.