Wider doorways & openings · Portsmouth
Wider doorways & openings in Portsmouth
Steelwork, approvals and making good for wider doorways & openings in Portsmouth and nearby.
- Survey, design and installation in one
- Covering PO1, PO2, PO3
- Inspected before it is covered
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
What wider doorways & openings involve in Portsmouth
Wider doorways & openings in Portsmouth are planned around the house, not a standard kit. Our coverage runs across Hampshire, so nearby villages are included too. We visit, measure and check what the wall carries, then arrange calculations and building control approval before any steel is ordered.
We arrange a survey visit, structural calculations where the wall is load-bearing, building control, propping, the lintel or beam, new door linings if you want them, and making good. One itemised written quote covers the lot, and the price is fixed in writing once the opening size and finish are agreed.
Things to plan for
- The main cost factors are whether the wall is structural, the width of the opening, what the support bears onto, how much electrical or heating work has to move, and whether you want new door linings and doors fitted as part of the job.
- Widening doorways is a frequent adaptation for wheelchair users and people using walking frames. Where a council grant or adaptation scheme is helping to pay, check its requirements for clear opening width before the opening is designed.
- For a modest increase in width, a lintel may be all that is needed, while a wider opening carrying a floor or wall usually needs steel. The engineer chooses the type and size from the actual loads, never from the opening width alone.
- When an opening widens, the old threshold strip and floor finishes often stop short. Carpet, boards or tiles need joining neatly across the new width, and a change in floor height between rooms may need a threshold bar or a gentle ramp.
- In older houses, a doorway may already have a timber lintel that has rotted or a brick arch that is hard to extend. These are replaced rather than added to, and the engineer allows for soft lime mortar and any cracking found once the wall is opened.
How the job runs in Portsmouth
Survey in Portsmouth
We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.
Engineer's design
A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.
Building control
We submit a building notice or full plans application to Portsmouth City Council, so approval is in place before the wall is touched.
Install and sign-off
Props go in, the opening is formed, the steel is set and packed, building control inspects it, and we make good.
Guide prices for wider doorways & openings in Portsmouth
As a guide, budget £1,100–£2,800 including VAT for widening an internal doorway in Portsmouth, based on published UK cost guides adjusted for prices in the South East (+12%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Widening an internal doorway | £1,100–£2,800 | Opening widened with a new lintel or short beam, approval where structural, and making good |
| Plastering and making good | £340–£1,340 | Boxing the beam, bead and skim, reveals, floor infill where the wall stood and tidy-up |
| RSJ supply and fit (single beam) | £900–£2,800 per beam | Beam supplied, delivered, lifted and packed on padstones, with propping (calculations and approval priced separately) |
| Building control fees | £280–£730 | Building notice or full plans fee and inspections; varies by council or approver |
Figures include our approximate regional adjustment for prices in the South East (+12%) and are rounded. How these figures are worked out.
Building control and neighbours in Portsmouth
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either Portsmouth City Council or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.
Wider doorways & openings near Portsmouth
- Gosport 1.7 mi
- Fareham 5.3 mi
- Havant 6.1 mi
- Waterlooville 6.2 mi
- Chichester 13.8 mi
- Hythe 14.2 mi
Questions about wider doorways & openings in Portsmouth
How much do wider doorways & openings cost in Portsmouth?
As a guide, budget £1,100–£2,800 including VAT for widening an internal doorway in Portsmouth, based on published UK cost guides adjusted for prices in the South East (+12%). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.
What happens at the survey visit in Portsmouth?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.
Can I widen a doorway in a load-bearing wall?
Yes. The extra width is spanned by a lintel or steel beam that a structural engineer specifies, sitting on solid bearings either side. Because the wall is structural, the work needs building control approval in England and Wales, a building warrant in Scotland, or a council building control application in Northern Ireland. We arrange the design and approval.
Is a lintel or a steel beam needed for a wider door?
It depends on the loads. A lintel can be enough for a modest widening under light loads, while an opening carrying floor joists or a wall above usually needs steel. The engineer decides from the actual loads and span rather than the width alone, and we fit whichever is specified.
What if there is a radiator or switch where the new opening goes?
It gets moved before the opening is cut. Radiators and pipework are relocated by a heating engineer, and switches and sockets by an electrician, with notifiable electrical work in England meeting Part P. These items are priced separately in the quote, so you can see what each one adds.
Do you cover Portsmouth for wider doorways & openings?
Yes. We carry out wider doorways & openings in Portsmouth and the PO1, PO2, PO3, PO4 and PO5 postcode districts. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.