Steel BeamInstallers
Hallway doorway widened into a larger opening with a new lintel before plastering

Wider doorways & openings · Hawarden

Wider doorways & openings in Hawarden

Wider doorways & openings for homes in CH5, designed by a structural engineer.

  • Itemised written quote
  • Beam sized by a structural engineer
  • Covering Hawarden and nearby

Free survey in Hawarden

Tell us about the wider doorways & opening job in Hawarden.

Please enter your name.
Please enter a UK phone number.
Please enter a valid email.
Please enter a UK postcode.
Please tell us a little about the job.
  • Free survey visit
  • Engineer's calculations arranged
  • Building control handled
  • Fixed written price once scope is agreed
  • England, Wales, mainland Scotland & NI

Wider doorways & openings in Hawarden: how it works

Wider doorways & openings in Hawarden are planned around the house, not a standard kit. We also cover the surrounding towns and villages in Flintshire. We visit, measure and check what the wall carries, then arrange calculations and building control approval before any steel is ordered.

We arrange a survey visit, structural calculations where the wall is load-bearing, building control, propping, the lintel or beam, new door linings if you want them, and making good. One itemised written quote covers the lot, and the price is fixed in writing once the opening size and finish are agreed.

Key points for your project

  • When an opening widens, the old threshold strip and floor finishes often stop short. Carpet, boards or tiles need joining neatly across the new width, and a change in floor height between rooms may need a threshold bar or a gentle ramp.
  • Each side of the new opening needs enough solid wall for the lintel or beam to sit on. If the opening runs close to a corner, another doorway or a chimney breast, there may not be enough masonry, and a column or padstone may be required.
  • In older houses, a doorway may already have a timber lintel that has rotted or a brick arch that is hard to extend. These are replaced rather than added to, and the engineer allows for soft lime mortar and any cracking found once the wall is opened.
  • The main cost factors are whether the wall is structural, the width of the opening, what the support bears onto, how much electrical or heating work has to move, and whether you want new door linings and doors fitted as part of the job.
  • Widening doorways is a frequent adaptation for wheelchair users and people using walking frames. Where a council grant or adaptation scheme is helping to pay, check its requirements for clear opening width before the opening is designed.

Four stages, one team

  1. Look and measure

    We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.

  2. Design and price

    Calculations come back from the engineer and we confirm your fixed written price, line by line.

  3. Building control

    We submit the application or notice to Flintshire County Council under the Building Regulations as they apply in Wales, before work starts.

  4. Fit, inspect, finish

    The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.

What do wider doorways & openings cost in Hawarden?

As a guide, budget £910–£2,280 including VAT for widening an internal doorway in Hawarden, based on published UK cost guides adjusted for prices in Wales (-9%).

JobTypical guide rangeWhat it usually covers
Widening an internal doorway£910–£2,280Opening widened with a new lintel or short beam, approval where structural, and making good
RSJ supply and fit (single beam)£730–£2,280 per beamBeam supplied, delivered, lifted and packed on padstones, with propping (calculations and approval priced separately)
Lintel replacement£360–£1,090 per lintelPropping, removing the old lintel, new lintel set on beds and brickwork made good
Building control fees£230–£590Application fee and inspections under the Welsh building regulations; varies by council or approver

Figures include our approximate regional adjustment for prices in Wales (-9%) and are rounded. How these figures are worked out.

Approvals in Hawarden

Welsh building regulations treat beams and new openings as controlled building work. We apply to Flintshire County Council on your behalf before anything is removed, give the commencement notice the 2026 Welsh rules require, and the steel is checked before it is boxed in.

The Party Wall etc. Act 1996 applies in Wales as well as England, so a beam bearing into a shared wall needs a party structure notice at least two months before work starts. We arrange notices through a party wall surveyor.

Building rules in Wales

Wider doorways & openings near Hawarden

Wider doorways & openings in Hawarden: your questions

What happens at the survey visit in Hawarden?

We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.

Can I stay at home while the work is done in Hawarden?

Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.

What is included in the price for a wider doorway?

The itemised written quote lists the survey, any engineer's calculations and building control fees, propping, cutting the opening, the lintel or steel, linings or plastered reveals, and making good. Moving services, supplying doors and flooring joins appear as separate lines. The price is fixed in writing once the size and finish are agreed.

Will widening a doorway make a mess?

There is some dust and noise, mainly on the day the opening is cut. We screen the area, protect floors along the route and use dust extraction on saws where possible. Rooms either side are affected for a day or two, while the rest of the house stays in normal use.

How long does it take to widen a doorway?

The structural part usually takes one to two working days: propping, cutting the opening, fitting the lintel or beam and packing it. Plastering follows, then a few days of drying before linings are painted or a new door is hung. Building control inspection fits in once the support is in place.

Planning to take a wall out?

Book a free survey visit. You get an itemised written quote covering calculations, building control, steel and making good.