Wider doorways & openings · Dundee
Wider doorways & openings in Dundee
Wider doorways & openings across Dundee, designed by a structural engineer and built under a building warrant.
- Free survey visit in Dundee
- Engineer's calculations arranged
- Building warrant handled for you
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
About our wider doorways & openings service in Dundee
Wider doorways and openings are gaps formed or enlarged in internal walls, with a lintel or steel beam carrying the masonry and loads above. They sit between a simple door change and a full wall removal: the span is shorter, but each opening still needs the right support and approval if the wall is structural.
If you are planning wider doorways & openings in Dundee, the order of work matters as much as the steel: survey, calculations, approval, propping, installation, inspection and making good. We cover the whole area, from the centre out to the suburbs. We run that sequence for you as one job with one point of contact.
Things to plan for
- Widening a single doorway in a load-bearing wall usually takes one to two days for the structural work. The plaster then needs time to dry before the door linings are decorated or a new door is hung.
- Hallway walls are often load-bearing because they line up with walls upstairs and carry the floor joists or the stairs. A wall that sounds hollow when knocked is usually a stud partition, but older homes can have timber walls that still carry loads, so the engineer checks.
- When an opening widens, the old threshold strip and floor finishes often stop short. Carpet, boards or tiles need joining neatly across the new width, and a change in floor height between rooms may need a threshold bar or a gentle ramp.
- Older door surrounds and walls can hide asbestos in textured coatings, insulating board above doors or panelling. In buildings built before 2000 it must be identified before the wall is cut, so a refurbishment survey of the area is arranged where there is a risk.
- Standard internal doors come in set widths, so it makes sense to size the opening to suit an off-the-shelf door and lining. Odd sizes need made-to-measure doors and linings, which take longer to arrange.
From survey to sign-off in Dundee
Survey in Dundee
We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.
Engineer's design
A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.
Building warrant
A building warrant is applied for from Dundee City Council, and work starts only once the warrant has been granted.
Install and sign-off
Props go in, the opening is formed, the steel is set and packed, building standards inspects it, and we make good.
Guide prices for wider doorways & openings in Dundee
As a guide, budget £910–£2,280 including VAT for widening an internal doorway in Dundee, based on published UK cost guides adjusted for prices in Scotland (-9%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Widening an internal doorway | £910–£2,280 | Opening widened with a new lintel or short beam, approval where structural, and making good |
| Building warrant fee | £215–£435 | Statutory fee set by the estimated value of the work: £215 up to £5,000, rising on a sliding scale (fees from 1 April 2026) |
| Lintel replacement | £360–£1,090 per lintel | Propping, removing the old lintel, new lintel set on beds and brickwork made good |
| Plastering and making good | £270–£1,090 | Boxing the beam, bead and skim, reveals, floor infill where the wall stood and tidy-up |
Figures include our approximate regional adjustment for prices in Scotland (-9%) and are rounded. How these figures are worked out.
Building control and neighbours in Dundee
Steel beam work in Dundee needs a building warrant from Dundee City Council. The structural design is part of the application, and the council's building standards team accepts the completion certificate once the work is done as approved.
There is no party wall notice system in Scotland. Instead, check your title deeds and, for flats, the tenement management scheme, and talk to neighbours early if the beam bears into a shared wall.
More in Dundee
Questions about wider doorways & openings in Dundee
What happens at the survey visit in Dundee?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.
Who approves wider doorways & openings in Dundee?
Structural work in Dundee needs a building warrant from Dundee City Council, granted before work starts. We prepare and submit it with the structural engineer's calculations and arrange the inspections, so the completion paperwork follows the job.
What is included in the price for a wider doorway?
The itemised written quote lists the survey, any engineer's calculations and building standards fees, propping, cutting the opening, the lintel or steel, linings or plastered reveals, and making good. Moving services, supplying doors and flooring joins appear as separate lines. The price is fixed in writing once the size and finish are agreed.
Is a lintel or a steel beam needed for a wider door?
It depends on the loads. A lintel can be enough for a modest widening under light loads, while an opening carrying floor joists or a wall above usually needs steel. The engineer decides from the actual loads and span rather than the width alone, and we fit whichever is specified.
Can I move a doorway to a different position?
Usually, yes. The old doorway is blocked up and a new opening is formed with the support the engineer specifies, and both changes are dealt with together for building standards if the wall is structural. Moving a door can release wall space for furniture or a better kitchen or bedroom layout.
How long does it take to widen a doorway?
The structural part usually takes one to two working days: propping, cutting the opening, fitting the lintel or beam and packing it. Plastering follows, then a few days of drying before linings are painted or a new door is hung. Building standards inspection fits in once the support is in place.
Can you work on older or listed homes in Dundee?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.