Structural calculations · Craigavon
Structural calculations in Craigavon
Steelwork, approvals and making good for structural calculations in Craigavon and nearby.
- Itemised written quote
- Beam sized by a structural engineer
- Covering Craigavon and nearby
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
What structural calculations involve in Craigavon
Planning structural calculations in Craigavon? Our team covers BT63, BT64, BT65 and BT66 and the streets around them. We also cover the surrounding towns and villages in Armagh City, Banbridge and Craigavon. You get one written quote for the calculations, approvals, propping, steel and making good.
We arrange the calculations as part of every structural job, or work to calculations you already have if they match the design. The engineer's output goes to building control with the application, and the same figures guide the steel order, the padstones and the propping on site.
What to expect
- Opening up can reveal things no survey could see, such as a hidden chimney flue, joists running the other way or a wall with no footing. When that happens, the engineer revises the design before work continues, and any change is priced before it goes ahead.
- Keep the final calculations and drawings with the building control completion certificate. Together they show a future buyer, lender or surveyor exactly what was installed and why, and they help any later alterations to build on a known design.
- If you already have calculations from your own engineer or architect, we can work to them, provided they match the layout being built. We check that the spans, loads and bearings shown agree with what is on site before ordering steel.
- Strength is only half the design. The engineer also limits how much the beam bends under load, because excessive deflection cracks plaster, jams doors and can damage glazing. Wide glazed openings often need a stiffer beam than strength alone would suggest.
- Calculations can also cover how the structure is held up during the work. For straightforward openings this may be a note on prop positions, while larger or more complex jobs may need a separate temporary works design.
Four stages, one team
Look and measure
We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.
Design and price
Calculations come back from the engineer and we confirm your fixed written price, line by line.
Building control
A full plans application or building notice goes to Armagh City, Banbridge and Craigavon Borough Council under the Building Regulations (Northern Ireland) 2012 before work begins.
Fit, inspect, finish
The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.
What do structural calculations cost in Craigavon?
As a guide, budget £220–£640 including VAT for structural calculations for a beam in Craigavon, based on published UK cost guides adjusted for prices in Northern Ireland (-14%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Structural calculations for a beam | £220–£640 | Site measure or photos, beam and padstone design and calculations for building control |
| Steel beam replacement | £1,700–£4,750 | Propping, removing the failed beam, new steel on proper bearings, approval and making good |
| Load-bearing wall removal with steel beam | £1,700–£4,300 | Typical internal wall up to about 4 m: calculations, building control, propping, steel, padstones, fitting, fire protection and making good |
| Building control fees | £220–£560 | Building notice or full plans fee and inspections; varies by council or approver |
Figures include our approximate regional adjustment for prices in Northern Ireland (-14%) and are rounded. How these figures are worked out.
Building control and neighbours in Craigavon
Removing a load-bearing wall in Northern Ireland needs building control approval from the council. Armagh City, Banbridge and Craigavon Borough Council covers Craigavon. The engineer's calculations support the application, and a completion certificate is issued after the final inspection.
The Party Wall etc. Act does not extend to Northern Ireland. Shared walls are dealt with under your title and the general law, so we recommend agreeing access and the work with your neighbour before it starts.
Questions about structural calculations in Craigavon
Who approves structural calculations in Craigavon?
Structural work in Craigavon needs a full plans application or building notice to Armagh City, Banbridge and Craigavon Borough Council. We prepare and submit it with the structural engineer's calculations and arrange the inspections, so the completion paperwork follows the job.
Do you also work near Craigavon?
Yes. We also cover nearby towns including Portadown, Banbridge, Lisburn and Dungannon.
Do structural calculations tell you which beam to buy?
Yes. The calculations specify the steel section, its grade and length, and the padstones or columns it needs, so the fabricator can supply exactly what was designed. Substituting a different beam on site without the engineer's agreement would leave the work out of line with the approved design.
Do I need structural calculations to remove a wall?
Yes, if the wall is load-bearing. Building control needs calculations showing that the new beam, its bearings and anything supporting it can carry the loads safely. Non-structural stud partitions normally do not need them, but an engineer should confirm a wall is non-structural before anyone assumes it.
What is a load take-down?
A load take-down is the part of the calculations that adds up every load reaching a beam or column and follows it down to the ground. It includes the roof, floors, walls, people, furniture and, where relevant, snow and wind. Each element along that path is then checked to make sure it can carry its share.
What happens at the survey visit in Craigavon?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.