Steel BeamInstallers
Two retail units opened into one with a steel beam and columns

Shop & commercial openings · Birmingham

Shop & commercial openings in Birmingham

Steelwork, approvals and making good for shop & commercial openings in Birmingham and nearby.

  • Free survey visit in Birmingham
  • Engineer's calculations arranged
  • Building control handled for you

Free survey in Birmingham

Tell us about the shop & commercial opening job in Birmingham.

Please enter your name.
Please enter a UK phone number.
Please enter a valid email.
Please enter a UK postcode.
Please tell us a little about the job.
  • Free survey visit
  • Engineer's calculations arranged
  • Building control handled
  • Fixed written price once scope is agreed
  • England, Wales, mainland Scotland & NI

Planning shop & commercial openings in Birmingham

If you live in Birmingham, shop & commercial openings can usually be planned and priced after a single survey visit. Our coverage runs across the West Midlands, so nearby villages are included too. We cover B1, B2, B3, B4 and B5, and we fix the price in writing once the layout and scope are agreed.

We carry out structural openings for small commercial premises across the UK, working to an engineer's design and handling building control. Work can be planned around opening hours, including out-of-hours shifts where the landlord and building allow, and coordinated with your shopfitter.

Worth knowing before you start

  • Plenty of businesses keep trading while the work goes on. Dust screens, hoarding and phased working can keep part of the premises open, and the noisiest cutting can be programmed outside opening hours where the building and neighbours allow.
  • Many shopfronts sit under an old steel or timber beam hidden behind the fascia for decades. It may be corroded, undersized for what is above or bearing on decayed masonry, so it is opened up and checked before keeping it is even considered.
  • Commercial premises often have three-phase power, alarm and data cabling, gas supplies and drainage running through the walls being altered. These are mapped at the survey, and any work on gas pipes must by law be done by a Gas Safe registered engineer.
  • Joining two units can change the fire strategy. The wall between them may be a compartment wall, escape routes and travel distances alter, and the steel needs fire protection to the required period. The fire risk assessment should be updated to match the new layout.
  • Commercial buildings built before 2000 should already have an asbestos register under the duty to manage. Before walls or ceilings are opened up, the register is checked and a refurbishment survey of the work area is arranged where it does not cover the job.

What happens, step by step

  1. Look and measure

    We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.

  2. Design and price

    Calculations come back from the engineer and we confirm your fixed written price, line by line.

  3. Building control

    We submit a building notice or full plans application to Birmingham City Council, so approval is in place before the wall is touched.

  4. Fit, inspect, finish

    The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.

How much should I budget in Birmingham?

As a guide, budget £5,000–£15,000 including VAT for shop or commercial structural opening in Birmingham, based on published UK cost guides adjusted for prices in the West Midlands (no adjustment).

JobTypical guide rangeWhat it usually covers
Shop or commercial structural opening£5,000–£15,000Transfer beam and columns for opening units together or forming a shopfront opening
Fire protection to a steel beam£150–£600 per beamFire-rated board boxing or an intumescent coating system as specified
Steel goalpost frame£2,000–£6,000Two posts and a beam bolted as a frame, pad foundations, base plates and fitting
Building control fees£250–£650Building notice or full plans fee and inspections; varies by council or approver

Figures include our approximate regional adjustment for prices in the West Midlands (no adjustment) and are rounded. How these figures are worked out.

Approvals in Birmingham

For Birmingham, building control is provided by Birmingham City Council, or by a registered building control approver if preferred. We send them the engineer's calculations with a building notice or full plans application and book the inspections. Work done without approval can cause problems at sale and is far dearer to put right later.

Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.

Building rules in England

Shop & commercial openings near Birmingham

Questions about shop & commercial openings in Birmingham

How much do shop & commercial openings cost in Birmingham?

As a guide, budget £5,000–£15,000 including VAT for shop or commercial structural opening in Birmingham, based on published UK cost guides adjusted for prices in the West Midlands (no adjustment). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.

Can I stay at home while the work is done in Birmingham?

Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.

How does fire safety change when two units are joined?

It can change significantly. The wall between the units may have been a compartment wall, escape routes and travel distances alter, and the new steel needs fire protection to the required period. Building control assesses this as part of the application, and the fire risk assessment for the premises should be updated for the new layout.

Does the beam above my shop window need replacing?

Not always, but it should be checked. Many shopfronts sit under an old steel, timber or concrete beam hidden behind the fascia, which may have corroded, rotted or been undersized for the wall above. An engineer inspects it once it is opened up and decides whether it can be kept, strengthened or must be replaced.

Do I need an asbestos survey before work on my shop?

Usually, if the building dates from before 2000. The duty holder for commercial premises should already have an asbestos register, and before walls, ceilings or the shopfront are opened up, a refurbishment survey of the work area is needed wherever that register does not cover it, so any asbestos is dealt with first.

Do you also work near Birmingham?

Yes. We also cover nearby towns including Aston, Smethwick, Acocks Green and West Bromwich.

Planning to take a wall out?

Book a free survey visit. You get an itemised written quote covering calculations, building control, steel and making good.