Shop & commercial openings · Folkestone
Shop & commercial openings in Folkestone
Steelwork, approvals and making good for shop & commercial openings in Folkestone and nearby.
- Price fixed in writing once scope is agreed
- Building control arranged
- Temporary works and making good included
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
About our shop & commercial openings service in Folkestone
We carry out shop & commercial openings in Folkestone, covering the CT18, CT19 and CT20 postcode districts. The wider Kent area is covered as well. The job starts with a free survey visit so the engineer's calculations are based on your actual walls, floors and loads.
We carry out structural openings for small commercial premises across the UK, working to an engineer's design and handling building control. Work can be planned around opening hours, including out-of-hours shifts where the landlord and building allow, and coordinated with your shopfitter.
Worth knowing before you start
- Structural alterations to commercial premises need building regulations approval just as homes do, and in Scotland a building warrant before work starts. In England they usually go through a full plans application, because fire safety is assessed alongside the structure.
- Supporting a shopfront means temporary works right at the street edge. Permission from the highway authority may be needed for hoarding, scaffolding or a lifting vehicle on the pavement, and props are positioned so the public route stays safe.
- Joining two units can change the fire strategy. The wall between them may be a compartment wall, escape routes and travel distances alter, and the steel needs fire protection to the required period. The fire risk assessment should be updated to match the new layout.
- Plenty of businesses keep trading while the work goes on. Dust screens, hoarding and phased working can keep part of the premises open, and the noisiest cutting can be programmed outside opening hours where the building and neighbours allow.
- A straightforward shopfront beam replacement can take a few days on site, while joining two units with several openings may run to a couple of weeks. The programme is agreed in writing before work starts so you can plan trading around it.
Four stages, one team
Free visit
A short visit to Folkestone to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
Guide prices for shop & commercial openings in Folkestone
As a guide, budget £5,600–£16,800 including VAT for shop or commercial structural opening in Folkestone, based on published UK cost guides adjusted for prices in the South East (+12%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Shop or commercial structural opening | £5,600–£16,800 | Transfer beam and columns for opening units together or forming a shopfront opening |
| Steel goalpost frame | £2,250–£6,700 | Two posts and a beam bolted as a frame, pad foundations, base plates and fitting |
| Fire protection to a steel beam | £170–£670 per beam | Fire-rated board boxing or an intumescent coating system as specified |
| Steel beam replacement | £2,250–£6,150 | Propping, removing the failed beam, new steel on proper bearings, approval and making good |
Figures include our approximate regional adjustment for prices in the South East (+12%) and are rounded. How these figures are worked out.
Building rules for Folkestone
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.
Local questions answered
Do I need a party wall agreement for shop & commercial openings in Folkestone?
Yes, if the beam bears into a shared wall: the Party Wall etc. Act 1996 applies in England and Wales, and a party structure notice must be served at least two months before that work starts. We arrange it through a party wall surveyor.
How much do shop & commercial openings cost in Folkestone?
As a guide, budget £5,600–£16,800 including VAT for shop or commercial structural opening in Folkestone, based on published UK cost guides adjusted for prices in the South East (+12%). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.
Do I need my landlord's permission to put in a steel beam?
Almost certainly, if you lease the premises. Most commercial leases forbid structural alterations without the landlord's written consent, usually given as a licence for alterations. We can supply the engineer's calculations and drawings your landlord asks for, though the lease terms themselves are a matter for you and your solicitor.
What kind of steel is used for a wide shop front?
The engineer chooses the section to suit the span and load. Wide frontages often use universal beams, sometimes paired or plated, and a goalpost frame of two columns and a beam where the existing piers cannot take the load. The steel is then fire protected and finished behind the fascia or boxing.
Does the beam above my shop window need replacing?
Not always, but it should be checked. Many shopfronts sit under an old steel, timber or concrete beam hidden behind the fascia, which may have corroded, rotted or been undersized for the wall above. An engineer inspects it once it is opened up and decides whether it can be kept, strengthened or must be replaced.