Shop & commercial openings · Chatham
Shop & commercial openings in Chatham
Shop & commercial openings in Chatham, from free survey to completion certificate.
- Price fixed in writing once scope is agreed
- Building control arranged
- Temporary works and making good included
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Planning shop & commercial openings in Chatham
We cover shop & commercial openings in Chatham (ME1, ME2, ME4) and the streets around it. We also cover the surrounding towns and villages in Kent. Each job is designed by a structural engineer and approved through Medway Council before work begins.
We carry out structural openings for small commercial premises across the UK, working to an engineer's design and handling building control. Work can be planned around opening hours, including out-of-hours shifts where the landlord and building allow, and coordinated with your shopfitter.
What to expect
- Purely internal works may not need planning permission, but a new or altered shopfront changes the look of the building and may need it, particularly in a conservation area. Listed commercial buildings also need listed building consent for structural changes.
- Where there is a flat above the shop, its occupants need to know about the works and their safety has to be protected. Their access, fire escape route and the structure holding up their floor must all be maintained throughout the job.
- Supporting a shopfront means temporary works right at the street edge. Permission from the highway authority may be needed for hoarding, scaffolding or a lifting vehicle on the pavement, and props are positioned so the public route stays safe.
- Commercial premises often have three-phase power, alarm and data cabling, gas supplies and drainage running through the walls being altered. These are mapped at the survey, and any work on gas pipes must by law be done by a Gas Safe registered engineer.
- Commercial buildings built before 2000 should already have an asbestos register under the duty to manage. Before walls or ceilings are opened up, the register is checked and a refurbishment survey of the work area is arranged where it does not cover the job.
How the job runs in Chatham
Look and measure
We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.
Design and price
Calculations come back from the engineer and we confirm your fixed written price, line by line.
Building control
We submit a building notice or full plans application to Medway Council, so approval is in place before the wall is touched.
Fit, inspect, finish
The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.
Guide prices for shop & commercial openings in Chatham
As a guide, budget £5,600–£16,800 including VAT for shop or commercial structural opening in Chatham, based on published UK cost guides adjusted for prices in the South East (+12%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Shop or commercial structural opening | £5,600–£16,800 | Transfer beam and columns for opening units together or forming a shopfront opening |
| Steel beam replacement | £2,250–£6,150 | Propping, removing the failed beam, new steel on proper bearings, approval and making good |
| Party wall surveyor (agreed surveyor, per neighbour) | £1,000–£2,250 per neighbour | Schedule of condition and award where a neighbour dissents; serving notice alone, where the neighbour consents, costs far less (England and Wales only) |
| Steel goalpost frame | £2,250–£6,700 | Two posts and a beam bolted as a frame, pad foundations, base plates and fitting |
Figures include our approximate regional adjustment for prices in the South East (+12%) and are rounded. How these figures are worked out.
Approvals in Chatham
For Chatham, building control is provided by Medway Council, or by a registered building control approver if preferred. We send them the engineer's calculations with a building notice or full plans application and book the inspections. Work done without approval can cause problems at sale and is far dearer to put right later.
Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.
Shop & commercial openings near Chatham
- Rochester 1.1 mi
- Gillingham 1.1 mi
- Strood 2.4 mi
- Maidstone 7.8 mi
- Gravesend 8.0 mi
- Sittingbourne 9.2 mi
Shop & commercial openings in Chatham: your questions
Do you also work near Chatham?
Yes. We also cover nearby towns including Rochester, Gillingham, Strood and Maidstone.
Do you cover Chatham for shop & commercial openings?
Yes. We carry out shop & commercial openings in Chatham and the ME1, ME2, ME4, ME5 and ME7 postcode districts. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.
Do I need planning permission for a new shop front?
Often, yes. A new or altered shopfront usually changes how the building looks from the street, which can need planning permission, especially in a conservation area. Purely internal openings generally do not, but listed buildings need listed building consent for structural changes inside or out. It is worth checking with the local planning authority early.
What kind of steel is used for a wide shop front?
The engineer chooses the section to suit the span and load. Wide frontages often use universal beams, sometimes paired or plated, and a goalpost frame of two columns and a beam where the existing piers cannot take the load. The steel is then fire protected and finished behind the fascia or boxing.
Does the beam above my shop window need replacing?
Not always, but it should be checked. Many shopfronts sit under an old steel, timber or concrete beam hidden behind the fascia, which may have corroded, rotted or been undersized for the wall above. An engineer inspects it once it is opened up and decides whether it can be kept, strengthened or must be replaced.