Shop & commercial openings · Kempston Hardwick
Shop & commercial openings in Kempston Hardwick
Shop & commercial openings for homes in MK42, MK43, designed by a structural engineer.
- Itemised written quote
- Beam sized by a structural engineer
- Covering Kempston Hardwick and nearby
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
What shop & commercial openings involve in Kempston Hardwick
Our shop & commercial openings service in Kempston Hardwick covers everything from the first visit to the completion paperwork. We also work in nearby Bedford, roughly 3.4 miles away. Postcode districts we cover here include MK42 and MK43.
Commercial buildings often have a flat or offices above the shop, a heavy brick front and old steel or timber over the existing shopfront. Opening them up means supporting a lot of load at street level, usually with the public walking past, while keeping disruption to trading as low as possible.
Things to plan for
- The main cost factors are the span and load above, whether columns or a goalpost frame are needed, the temporary works at the street, out-of-hours working, lifting equipment, and the fire protection and finish the opening requires.
- Most commercial leases prohibit structural alterations without the landlord's written consent, often given as a licence for alterations. Securing it before work starts avoids disputes later, and we supply the drawings and calculations the landlord or their surveyor asks to see.
- Commercial openings tend to need longer, heavier steel than domestic work. Deliveries are planned around loading restrictions, and sections may be lifted with a small crane, telehandler or chain hoist, or spliced and bolted in place where the engineer allows.
- Joining two units can change the fire strategy. The wall between them may be a compartment wall, escape routes and travel distances alter, and the steel needs fire protection to the required period. The fire risk assessment should be updated to match the new layout.
- Plenty of businesses keep trading while the work goes on. Dust screens, hoarding and phased working can keep part of the premises open, and the noisiest cutting can be programmed outside opening hours where the building and neighbours allow.
How the job runs in Kempston Hardwick
Survey in Kempston Hardwick
We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.
Engineer's design
A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Install and sign-off
Props go in, the opening is formed, the steel is set and packed, building control inspects it, and we make good.
Guide prices for shop & commercial openings in Kempston Hardwick
As a guide, budget £5,300–£15,900 including VAT for shop or commercial structural opening in Kempston Hardwick, based on published UK cost guides adjusted for prices in the East of England (+6%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Shop or commercial structural opening | £5,300–£15,900 | Transfer beam and columns for opening units together or forming a shopfront opening |
| Building control fees | £260–£690 | Building notice or full plans fee and inspections; varies by council or approver |
| Steel beam replacement | £2,100–£5,850 | Propping, removing the failed beam, new steel on proper bearings, approval and making good |
| Fire protection to a steel beam | £160–£640 per beam | Fire-rated board boxing or an intumescent coating system as specified |
Figures include our approximate regional adjustment for prices in the East of England (+6%) and are rounded. How these figures are worked out.
Building control and neighbours in Kempston Hardwick
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Questions about shop & commercial openings in Kempston Hardwick
Can I stay at home while the work is done in Kempston Hardwick?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.
Do I need a party wall agreement for shop & commercial openings in Kempston Hardwick?
Yes, if the beam bears into a shared wall: the Party Wall etc. Act 1996 applies in England and Wales, and a party structure notice must be served at least two months before that work starts. We arrange it through a party wall surveyor.
Do I need my landlord's permission to put in a steel beam?
Almost certainly, if you lease the premises. Most commercial leases forbid structural alterations without the landlord's written consent, usually given as a licence for alterations. We can supply the engineer's calculations and drawings your landlord asks for, though the lease terms themselves are a matter for you and your solicitor.
Can I knock two shops into one?
Usually, yes, with the right approvals. The dividing wall is replaced with steel designed by a structural engineer, building control approves the work and the fire strategy is updated for the combined unit. You also need landlord consent if you lease either unit, and party wall notices in England and Wales if the steel bears into a wall shared with another owner.
Do I need an asbestos survey before work on my shop?
Usually, if the building dates from before 2000. The duty holder for commercial premises should already have an asbestos register, and before walls, ceilings or the shopfront are opened up, a refurbishment survey of the work area is needed wherever that register does not cover it, so any asbestos is dealt with first.