Steel BeamInstallers
Two installers seen from behind lifting a steel beam onto a padstone

RSJ installation · Magherafelt

RSJ installation in Magherafelt

RSJ installation in Magherafelt, from free survey to completion certificate.

  • Free survey visit in Magherafelt
  • Engineer's calculations arranged
  • Building control handled for you

Free survey in Magherafelt

Tell us about the RSJ installation job in Magherafelt.

Please enter your name.
Please enter a UK phone number.
Please enter a valid email.
Please enter a UK postcode.
Please tell us a little about the job.
  • Free survey visit
  • Engineer's calculations arranged
  • Building control handled
  • Fixed written price once scope is agreed
  • England, Wales, mainland Scotland & NI

About our RSJ installation service in Magherafelt

Need RSJ installation in Magherafelt? The wider Mid Ulster area is covered as well. We survey the property, arrange the engineer's design, deal with Mid Ulster District Council, fit the steel and make good, all under one quote for BT45 addresses.

We supply and fit the steel from start to finish. That includes arranging the calculations, having the beam fabricated with the right end plates, holes and primer, getting it into the property, setting it on its bearings, and packing it so it takes the load. Building control, propping and making good sit in the same itemised quote.

Worth knowing before you start

  • If you already hold calculations from an architect or engineer, we install to those. Where something on site differs from the drawing, such as a weaker wall or a different joist direction, the engineer is asked to confirm before work carries on.
  • Floor joists can rest on the bottom flange, hang from timber packers bolted into the web, or be notched to sit over the steel. The engineer specifies the connection, and it affects how flush the finished ceiling can be.
  • Packing is what makes the beam work. Steel shims and dry-pack mortar fill the gap between the top flange and the structure above, so the load transfers onto the steel without the floor or wall settling down onto it.
  • The engineer chooses the section type for the job. Universal beams suit most spans, universal columns are stockier and used as posts or where depth is limited, parallel flange channels fit against walls or timbers, and box sections suit slim or exposed members.
  • RSJ originally meant a rolled steel joist with tapered flanges. Most beams supplied for homes today are universal beams with parallel flanges, but the term RSJ has stuck, and builders, engineers and building control all understand what it means.

How the job runs in Magherafelt

  1. Look and measure

    We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.

  2. Design and price

    Calculations come back from the engineer and we confirm your fixed written price, line by line.

  3. Building control

    A full plans application or building notice goes to Mid Ulster District Council under the Building Regulations (Northern Ireland) 2012 before work begins.

  4. Fit, inspect, finish

    The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.

What does RSJ installation cost in Magherafelt?

As a guide, budget £690–£2,150 per beam including VAT for rSJ supply and fit (single beam) in Magherafelt, based on published UK cost guides adjusted for prices in Northern Ireland (-14%).

JobTypical guide rangeWhat it usually covers
RSJ supply and fit (single beam)£690–£2,150 per beamBeam supplied, delivered, lifted and packed on padstones, with propping (calculations and approval priced separately)
Load-bearing wall removal with steel beam£1,700–£4,300Typical internal wall up to about 4 m: calculations, building control, propping, steel, padstones, fitting, fire protection and making good
Steel beam replacement£1,700–£4,750Propping, removing the failed beam, new steel on proper bearings, approval and making good
Fire protection to a steel beam£130–£520 per beamFire-rated board boxing or an intumescent coating system as specified

Figures include our approximate regional adjustment for prices in Northern Ireland (-14%) and are rounded. How these figures are worked out.

Building control and neighbours in Magherafelt

Removing a load-bearing wall in Northern Ireland needs building control approval from the council. Mid Ulster District Council covers Magherafelt. The engineer's calculations support the application, and a completion certificate is issued after the final inspection.

The Party Wall etc. Act does not extend to Northern Ireland. Shared walls are dealt with under your title and the general law, so we recommend agreeing access and the work with your neighbour before it starts.

Building rules in Northern Ireland

RSJ installation near Magherafelt

Local questions answered

Who approves RSJ installation in Magherafelt?

Structural work in Magherafelt needs a full plans application or building notice to Mid Ulster District Council. We prepare and submit it with the structural engineer's calculations and arrange the inspections, so the completion paperwork follows the job.

What happens at the survey visit in Magherafelt?

We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.

Can you fit an RSJ to my own engineer's calculations?

Yes. We install to calculations and drawings from your engineer or architect, as long as they cover the beam, bearings and any columns or connections. If site conditions differ from what the design assumed, we check with the engineer before carrying on.

Does an RSJ need to be painted or boxed in?

Usually it needs fire protection, most often by boxing in with fire-rated plasterboard and skimming. If you want the steel on show, an intumescent paint system can be applied to the specified thickness and then top-coated in your chosen colour. The fabrication primer is not fire protection on its own.

How heavy is an RSJ and how is it lifted?

Weight varies widely with the section and length, from beams a small team can carry to steels needing mechanical lifting. The lift is planned at the survey, using enough people, trolleys and suitable lifting equipment so the beam goes up safely and level onto both bearings.

Do I need a party wall agreement for RSJ installation in Magherafelt?

There is no Party Wall Act in Northern Ireland. Your title deeds and the general law apply instead, so agree the work with your neighbour in writing before it starts.

Planning to take a wall out?

Book a free survey visit. You get an itemised written quote covering calculations, building control, steel and making good.