Party wall beam works · Tyne and Wear
Party wall beam works in Tyne and Wear
Survey, engineer's design and installation of party wall beam works anywhere in Tyne and Wear.
- Price fixed in writing once scope is agreed
- Building control arranged
- Temporary works and making good included
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
What party wall beam works involve in Tyne and Wear
Party wall beam works are building jobs where a steel beam or padstone is set into a wall shared with a neighbour. In England and Wales, cutting into a party wall to take a beam's bearing is notifiable under the Party Wall etc. Act 1996, so notice must be served on the adjoining owner before work begins.
If you are planning party wall beam works in Tyne and Wear, the order of work matters as much as the steel: survey, calculations, approval, propping, installation, inspection and making good. We can survey in places such as Gateshead, Washington and Newcastle upon Tyne and the villages around them. We run that sequence for you as one job with one point of contact.
Worth knowing before you start
- If there is a dissent, the owners can appoint one agreed surveyor to act impartially for both, or a surveyor each. Either way, the surveyors' role under the Act is to resolve the dispute fairly, not to act as advocates for one side.
- Cutting a pocket into a shared wall needs care, because the wall also supports the neighbour's floors and roof. The engineer specifies how the pocket is formed and packed, and props or needles may be needed to keep both houses supported while it is cut.
- A schedule of condition records the neighbour's side of the wall before work begins, usually with written notes and photographs of existing cracks and finishes. It gives both sides a fair reference point if anyone later claims the work caused damage.
- Surveyors' fees under the Act are normally the responsibility of whoever is having the work done. Costs rise with the number of adjoining owners, whether each appoints their own surveyor, and how much checking the beam design and method need.
- Cutting into a party wall to take the bearing of a beam is notifiable work under the Party Wall etc. Act 1996. So is cutting away projections attached to the wall, such as chimney breasts, which often comes up during knock-throughs.
From survey to sign-off in Tyne and Wear
Free visit
A short visit to Tyne and Wear to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
What do party wall beam works cost in Tyne and Wear?
As a guide, budget £840–£1,860 per neighbour including VAT for party wall surveyor (agreed surveyor, per neighbour) in Tyne and Wear, based on published UK cost guides adjusted for prices in the North East (-7%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Party wall surveyor (agreed surveyor, per neighbour) | £840–£1,860 per neighbour | Schedule of condition and award where a neighbour dissents; serving notice alone, where the neighbour consents, costs far less (England and Wales only) |
| Chimney breast removal (ground floor) | £1,400–£2,800 | Ground-floor breast removed, steel to support the breast above, building control and making good |
| Side return extension steelwork | £3,250–£7,900 | Beams and posts along the old side wall line, propping and approvals (extension build extra) |
| Loft conversion steels | £2,300–£5,600 | Supply and fit of floor and ridge steels on padstones, including lifting into the roof space |
Figures include our approximate regional adjustment for prices in the North East (-7%) and are rounded. How these figures are worked out.
Approvals in Tyne and Wear
Structural openings in English homes need building regulations approval before work starts. The local council's building control team can deal with it, or you can use a registered building control approver. Either way the steel is inspected before it is covered, and a completion certificate is issued at the end. Keep it safe for when you sell.
Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.
Questions about party wall beam works in Tyne and Wear
Which towns in Tyne and Wear do you cover?
We cover towns including Newcastle upon Tyne, Sunderland, South Shields and Gateshead, plus the villages and smaller towns around them.
Do party wall rules apply in Scotland?
No. The Party Wall etc. Act 1996 covers England and Wales only. In Scotland, rights and responsibilities for a shared wall come from the title deeds and common law, and in flats from the Tenements (Scotland) Act 2004. A building warrant must still be granted before any structural beam work begins.
Who pays for the party wall surveyor?
Normally the building owner, meaning the person having the work done, pays the reasonable fees of the surveyors for both sides, because the work is for their benefit. Fees vary with the number of neighbours affected and the complexity of the work, which is why they sit as a separate item in our quote.
Do I need a party wall agreement to put a steel beam in?
Yes, in England and Wales, if the beam will bear into a wall you share with a neighbour. Notice is required under the Party Wall etc. Act 1996, and the neighbour may consent in writing or dissent, in which case surveyors produce a party wall award. Scotland and Northern Ireland have no equivalent Act.
What happens if my neighbour dissents?
A dissent means surveyors are appointed to settle how the work goes ahead; it does not mean the work is refused. The owners either agree on one surveyor or appoint one each. The surveyors usually prepare a schedule of condition of the neighbour's property and publish an award setting out how and when the beam can be fitted.