Party wall beam works · Chorley
Party wall beam works in Chorley
Party wall beam works in Chorley, from free survey to completion certificate.
- Survey, design and installation in one
- Covering PR6, PR7
- Inspected before it is covered
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Party wall beam works in Chorley: how it works
Need party wall beam works in Chorley? We also work in nearby Wigan, roughly 7.4 miles away. We survey the property, arrange the engineer's design, deal with local building control, fit the steel and make good, all under one quote for PR6 and PR7 addresses.
In terraced and semi-detached homes, the most obvious place for a new beam to bear is often the wall you share with next door. That wall belongs partly to your neighbour, so in England and Wales the law sets out a process for telling them, recording the condition of their side and settling any disagreement before the steel goes in.
Worth knowing before you start
- Keep the notices, any written consent, the schedule of condition and the award with your building control certificate. A buyer's solicitor may ask whether party wall procedures were followed, and these documents answer that. For legal questions, a solicitor or the surveyor is the right adviser.
- Cutting into a party wall to take the bearing of a beam is notifiable work under the Party Wall etc. Act 1996. So is cutting away projections attached to the wall, such as chimney breasts, which often comes up during knock-throughs.
- A party wall is usually the wall dividing two attached homes, such as the wall between terraced or semi-detached houses. Garden walls straddling the boundary are party fence walls, but for beam work it is the main separating wall between the houses that usually matters.
- Surveyors' fees under the Act are normally the responsibility of whoever is having the work done. Costs rise with the number of adjoining owners, whether each appoints their own surveyor, and how much checking the beam design and method need.
- Cutting a pocket into a shared wall needs care, because the wall also supports the neighbour's floors and roof. The engineer specifies how the pocket is formed and packed, and props or needles may be needed to keep both houses supported while it is cut.
Four stages, one team
Survey in Chorley
We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.
Engineer's design
A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Install and sign-off
Props go in, the opening is formed, the steel is set and packed, building control inspects it, and we make good.
What do party wall beam works cost in Chorley?
As a guide, budget £860–£1,920 per neighbour including VAT for party wall surveyor (agreed surveyor, per neighbour) in Chorley, based on published UK cost guides adjusted for prices in the North West (-4%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Party wall surveyor (agreed surveyor, per neighbour) | £860–£1,920 per neighbour | Schedule of condition and award where a neighbour dissents; serving notice alone, where the neighbour consents, costs far less (England and Wales only) |
| Building control fees | £240–£620 | Building notice or full plans fee and inspections; varies by council or approver |
| Side return extension steelwork | £3,350–£8,150 | Beams and posts along the old side wall line, propping and approvals (extension build extra) |
| Loft conversion steels | £2,400–£5,750 | Supply and fit of floor and ridge steels on padstones, including lifting into the roof space |
Figures include our approximate regional adjustment for prices in the North West (-4%) and are rounded. How these figures are worked out.
Approvals in Chorley
For Chorley, building control is provided by the local council's building control team, or by a registered building control approver if preferred. We send them the engineer's calculations with a building notice or full plans application and book the inspections. Work done without approval can cause problems at sale and is far dearer to put right later.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Party wall beam works in Chorley: your questions
What happens at the survey visit in Chorley?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.
What is a schedule of condition?
A schedule of condition is a written and photographic record of the neighbour's property, focused on the rooms next to the party wall, made before work starts. It notes existing cracks, stains and finishes. If damage is alleged later, the surveyors compare the property with the schedule to see what changed during the work.
What if work starts without serving a party wall notice?
The neighbour can seek a court injunction to stop the work until the proper procedure is followed, and starting without notice weakens the building owner's position if damage is later disputed. It can also cause problems when either property is sold. We do not start notifiable party wall work until the notice process is complete.
What happens if my neighbour dissents?
A dissent means surveyors are appointed to settle how the work goes ahead; it does not mean the work is refused. The owners either agree on one surveyor or appoint one each. The surveyors usually prepare a schedule of condition of the neighbour's property and publish an award setting out how and when the beam can be fitted.