Lintel replacement · Swansea
Lintel replacement in Swansea
Calculations, approvals, propping, steel and making good for lintel replacement across Swansea.
- Price fixed in writing once scope is agreed
- Building control arranged
- Temporary works and making good included
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
About our lintel replacement service in Swansea
Lintel replacement is the removal of a failed beam above a window, door or other opening and its replacement with a new lintel specified by a structural engineer. The masonry above is held on temporary supports while the old lintel comes out, the new one is bedded level on sound bearings, and the brickwork and plaster around it are rebuilt and made good.
Lintel replacement in Swansea follows the same careful process wherever the property is: a survey, an engineer's design, the right approval and safe temporary works. Towns we cover include Gorseinon and Clydach, among other places in the area. We price it all up front so there are no surprises once the wall is open.
What to expect
- Diagonal cracks that start at the top corners of a window and step up through the mortar joints are a classic sign of a lintel problem. Movement elsewhere in a house can cause similar cracks, so the cause is confirmed on site before anything is replaced.
- Windows and doors can often stay in place during a lintel replacement, keeping the house secure and weathertight. Where a frame has been carrying sagging brickwork for some time, it may need adjusting or replacing once the new lintel takes the load.
- Older steel lintels and bare steel angles can corrode where water sits on them. Rust takes up more room than the steel it comes from, so a corroding lintel can lift the brick course above it and open up horizontal cracks.
- Bay windows often rely on a timber beam, sometimes called a bressummer, across the front of the bay. When it rots, the bay roof and the brickwork over it can drop, and the engineer may specify a steel replacement instead.
- While the old lintel is out, the brickwork above sits on adjustable steel props with needles or masonry prop heads fixed through the mortar joints. The props stand on boards or spreaders so their load is shared across the ground or floor beneath.
What happens, step by step
Look and measure
We check the wall, the span you want and what the wall is carrying, and photograph anything the engineer needs to see.
Design and price
Calculations come back from the engineer and we confirm your fixed written price, line by line.
Building control
We submit the application or notice to Swansea Council under the Building Regulations as they apply in Wales, before work starts.
Fit, inspect, finish
The work is propped and the steel installed and packed tight. After inspection the opening is boxed, plastered and left clean.
Guide prices for lintel replacement in Swansea
As a guide, budget £360–£1,090 per lintel including VAT for lintel replacement in Swansea, based on published UK cost guides adjusted for prices in Wales (-9%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Lintel replacement | £360–£1,090 per lintel | Propping, removing the old lintel, new lintel set on beds and brickwork made good |
| Rear wall opening for bi-fold or sliding doors | £2,300–£6,350 | External wall opened up to about 5 m with steel, propping, cavity tray and making good (doors supplied separately) |
| Temporary works and propping | £140–£460 | Props, spreaders, needles and sole plates for a typical opening, installed and struck |
| Structural calculations for a beam | £230–£680 | Site measure or photos, beam and padstone design and calculations for building control |
Figures include our approximate regional adjustment for prices in Wales (-9%) and are rounded. How these figures are worked out.
Building rules for Swansea
Removing a load-bearing wall in Wales needs approval under the Welsh building regulations before work starts. For Swansea the application goes to Swansea Council or a registered building control approver, with the engineer's calculations, and a completion certificate follows the final inspection.
The Party Wall etc. Act 1996 applies in Wales as well as England, so a beam bearing into a shared wall needs a party structure notice at least two months before work starts. We arrange notices through a party wall surveyor.
Lintel replacement in Swansea: your questions
Can I stay at home while the work is done in Swansea?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.
How soon can lintel replacement start in Swansea?
Start dates depend on the engineer's calculations, the building control approval and, where needed, party wall notice periods. We give you a realistic timetable after the survey and keep you updated as each approval comes through.
Why is my concrete lintel cracking and flaking?
Usually because the steel reinforcement inside has rusted. Rust takes up more space than steel, so it pushes the concrete cover off, exposing more steel to damp and speeding up the damage. An engineer checks whether the lintel can still do its job, but in many cases replacement is the sensible fix.
How do I know if my lintel needs replacing?
Look for diagonal cracks rising from the top corners of a window or door, brick courses that dip over the opening, rust staining or flaking on a concrete lintel, and frames that have started to stick. Any of these is worth having checked, as the cause needs confirming on site before a replacement is planned.
What type of lintel will be fitted?
The engineer decides, based on the opening width, the wall construction and the load above. Steel lintels are common in cavity walls, while solid walls or wide openings may suit a different type or a steel section. We fit what the specification calls for rather than a one-size option.
Is a cracked lintel dangerous?
It can become a problem if left, because the masonry above loses support and cracks tend to widen as it settles. Failure is usually gradual, but if bricks are loose, a frame is distorting or cracks are growing quickly, have it checked promptly and keep people clear of the area.
What happens at the survey visit in Swansea?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.