Lintel replacement · Wellington
Lintel replacement in Wellington
Lintel replacement in Wellington, from free survey to completion certificate.
- Itemised written quote
- Beam sized by a structural engineer
- Covering Wellington and nearby
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
About our lintel replacement service in Wellington
Our lintel replacement service in Wellington covers everything from the first visit to the completion paperwork. Wellington is around 3.3 miles from Telford, and we cover both. Postcode districts we cover here include TF1, TF5 and TF6.
A lintel is the short beam that carries the brickwork over a window or door. When it fails, the signs tend to show outside first: a crack stepping up from the corner of the frame, a dip in the brick courses, or a window that has started to bind. Timber, concrete and old steel lintels each fail in their own way, but the fix follows the same principle.
What to expect
- Cables for outside lights, burglar alarms and doorbells often run just above window and door heads. These are noted at the survey and made safe by an electrician before the brickwork is opened up, then reinstated afterwards.
- Bricks taken down are cleaned and reused where possible, and any shortfall is made up with reclaimed or close-matching bricks. Mortar is mixed to suit the colour and strength of the existing wall, which in older homes often means a lime mortar.
- While the old lintel is out, the brickwork above sits on adjustable steel props with needles or masonry prop heads fixed through the mortar joints. The props stand on boards or spreaders so their load is shared across the ground or floor beneath.
- Concrete lintels fail when the steel reinforcement inside rusts and swells, pushing off the concrete face. Rust staining, flaking edges and exposed bars are the warning signs, and once that process is well under way an engineer will often recommend replacement over patching.
- Many Victorian and Edwardian houses have a timber lintel hidden behind a decorative brick arch or on the inner face of the wall. Damp from leaking gutters or failed pointing can rot it unseen until the brickwork above starts to drop.
From survey to sign-off in Wellington
Survey in Wellington
We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.
Engineer's design
A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.
Building control
We submit a building notice or full plans application to Telford & Wrekin Council, so approval is in place before the wall is touched.
Install and sign-off
Props go in, the opening is formed, the steel is set and packed, building control inspects it, and we make good.
Guide prices for lintel replacement in Wellington
As a guide, budget £400–£1,200 per lintel including VAT for lintel replacement in Wellington, based on published UK cost guides adjusted for prices in the West Midlands (no adjustment).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Lintel replacement | £400–£1,200 per lintel | Propping, removing the old lintel, new lintel set on beds and brickwork made good |
| Rear wall opening for bi-fold or sliding doors | £2,500–£7,000 | External wall opened up to about 5 m with steel, propping, cavity tray and making good (doors supplied separately) |
| Widening an internal doorway | £1,000–£2,500 | Opening widened with a new lintel or short beam, approval where structural, and making good |
| Steel beam replacement | £2,000–£5,500 | Propping, removing the failed beam, new steel on proper bearings, approval and making good |
Figures include our approximate regional adjustment for prices in the West Midlands (no adjustment) and are rounded. How these figures are worked out.
Building control and neighbours in Wellington
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either Telford & Wrekin Council or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Lintel replacement near Wellington
- Telford 3.3 mi
- Shrewsbury 9.9 mi
- Stafford 18.3 mi
- Wolverhampton 18.3 mi
- Loughton 18.5 mi
- Wednesfield 19.5 mi
Questions about lintel replacement in Wellington
What happens at the survey visit in Wellington?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.
Do you also work near Wellington?
Yes. We also cover nearby towns including Telford, Shrewsbury, Stafford and Wolverhampton.
Will the new brickwork match the old?
We aim for a close match by reusing the original bricks wherever they come out cleanly and sourcing reclaimed or similar bricks for any shortfall. Mortar colour and type are chosen to suit the existing wall. New work can look slightly fresher at first and tends to weather in over time.
Can a timber lintel in an old house be replaced with steel or concrete?
Yes, where the engineer is satisfied it suits the wall. Timber lintels in older solid-walled homes are often swapped for a steel or concrete alternative that will not rot. The engineer considers how the wall is built, and where lime mortar is present the rebuild uses a compatible mortar.
How long does lintel replacement take?
Most single openings take one to two working days on site, covering propping, removing the old lintel, fitting the new one and rebuilding the brickwork. Upper-floor lintels needing scaffolding, wide bay windows, and jobs where bricks must be sourced to match can all take longer.
Can you work on older or listed homes in Wellington?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.