Steel BeamInstallers
Brickwork propped above a window while a cracked lintel is replaced

Lintel replacement · Canvey Island

Lintel replacement in Canvey Island

Lintel replacement in Canvey Island, from free survey to completion certificate.

  • Price fixed in writing once scope is agreed
  • Building control arranged
  • Temporary works and making good included

Free survey in Canvey Island

Tell us about the lintel replacement job in Canvey Island.

Please enter your name.
Please enter a UK phone number.
Please enter a valid email.
Please enter a UK postcode.
Please tell us a little about the job.
  • Free survey visit
  • Engineer's calculations arranged
  • Building control handled
  • Fixed written price once scope is agreed
  • England, Wales, mainland Scotland & NI

Lintel replacement in Canvey Island: how it works

Canvey Island has a mix of housing, and lintel replacement needs a slightly different approach in each. It sits about 5.8 miles from Southend-on-Sea, which we also cover. Whatever the age of the property, the steel goes in on proper bearings with temporary support in place throughout.

We survey the opening, arrange the engineer's specification and building control, prop the wall, swap the lintel and rebuild the masonry and plaster around it. Your quote is written and itemised, and it covers matching the bricks and mortar as closely as the existing wall allows.

What to expect

  • Cables for outside lights, burglar alarms and doorbells often run just above window and door heads. These are noted at the survey and made safe by an electrician before the brickwork is opened up, then reinstated afterwards.
  • Windows and doors can often stay in place during a lintel replacement, keeping the house secure and weathertight. Where a frame has been carrying sagging brickwork for some time, it may need adjusting or replacing once the new lintel takes the load.
  • While the old lintel is out, the brickwork above sits on adjustable steel props with needles or masonry prop heads fixed through the mortar joints. The props stand on boards or spreaders so their load is shared across the ground or floor beneath.
  • A typical single lintel takes a day or two on site. Keep the building control completion certificate with your property papers, because buyers' surveyors often notice old cracking around openings and their solicitors will ask what was done about it.
  • Older steel lintels and bare steel angles can corrode where water sits on them. Rust takes up more room than the steel it comes from, so a corroding lintel can lift the brick course above it and open up horizontal cracks.

Four stages, one team

  1. Free visit

    A short visit to Canvey Island to see the job, agree what you want and check the bearings, floors and services that affect the design.

  2. Calculations

    The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.

  3. Building control

    We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.

  4. Steel in, made good

    On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.

Guide prices for lintel replacement in Canvey Island

As a guide, budget £420–£1,270 per lintel including VAT for lintel replacement in Canvey Island, based on published UK cost guides adjusted for prices in the East of England (+6%).

JobTypical guide rangeWhat it usually covers
Lintel replacement£420–£1,270 per lintelPropping, removing the old lintel, new lintel set on beds and brickwork made good
Plastering and making good£320–£1,270Boxing the beam, bead and skim, reveals, floor infill where the wall stood and tidy-up
Structural calculations for a beam£260–£800Site measure or photos, beam and padstone design and calculations for building control
Widening an internal doorway£1,050–£2,650Opening widened with a new lintel or short beam, approval where structural, and making good

Figures include our approximate regional adjustment for prices in the East of England (+6%) and are rounded. How these figures are worked out.

Approvals in Canvey Island

In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.

Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.

Building rules in England

Lintel replacement near Canvey Island

Questions about lintel replacement in Canvey Island

Do you cover Canvey Island for lintel replacement?

Yes. We carry out lintel replacement in Canvey Island and the SS7 and SS8 postcode districts. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.

Can you work on older or listed homes in Canvey Island?

Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.

Is a cracked lintel dangerous?

It can become a problem if left, because the masonry above loses support and cracks tend to widen as it settles. Failure is usually gradual, but if bricks are loose, a frame is distorting or cracks are growing quickly, have it checked promptly and keep people clear of the area.

Why is my concrete lintel cracking and flaking?

Usually because the steel reinforcement inside has rusted. Rust takes up more space than steel, so it pushes the concrete cover off, exposing more steel to damp and speeding up the damage. An engineer checks whether the lintel can still do its job, but in many cases replacement is the sensible fix.

How do I know if my lintel needs replacing?

Look for diagonal cracks rising from the top corners of a window or door, brick courses that dip over the opening, rust staining or flaking on a concrete lintel, and frames that have started to stick. Any of these is worth having checked, as the cause needs confirming on site before a replacement is planned.

What happens at the survey visit in Canvey Island?

We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.

Planning to take a wall out?

Book a free survey visit. You get an itemised written quote covering calculations, building control, steel and making good.