Lintel replacement · Truro
Lintel replacement in Truro
Steelwork, approvals and making good for lintel replacement in Truro and nearby.
- Price fixed in writing once scope is agreed
- Building control arranged
- Temporary works and making good included
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Lintel replacement in Truro: how it works
Need lintel replacement in Truro? The wider Cornwall area is covered as well. We survey the property, arrange the engineer's design, deal with Cornwall Council, fit the steel and make good, all under one quote for TR1 addresses.
We survey the opening, arrange the engineer's specification and building control, prop the wall, swap the lintel and rebuild the masonry and plaster around it. Your quote is written and itemised, and it covers matching the bricks and mortar as closely as the existing wall allows.
Worth knowing before you start
- Ground-floor lintels can usually be replaced from the ground with props alone. Openings on upper floors need scaffolding or a tower, which adds time and cost but also gives a safe, stable platform for rebuilding the brickwork neatly.
- Bricks taken down are cleaned and reused where possible, and any shortfall is made up with reclaimed or close-matching bricks. Mortar is mixed to suit the colour and strength of the existing wall, which in older homes often means a lime mortar.
- Windows and doors can often stay in place during a lintel replacement, keeping the house secure and weathertight. Where a frame has been carrying sagging brickwork for some time, it may need adjusting or replacing once the new lintel takes the load.
- Cables for outside lights, burglar alarms and doorbells often run just above window and door heads. These are noted at the survey and made safe by an electrician before the brickwork is opened up, then reinstated afterwards.
- Bay windows often rely on a timber beam, sometimes called a bressummer, across the front of the bay. When it rots, the bay roof and the brickwork over it can drop, and the engineer may specify a steel replacement instead.
Four stages, one team
Free visit
A short visit to Truro to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building control
We submit a building notice or full plans application to Cornwall Council, so approval is in place before the wall is touched.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
Guide prices for lintel replacement in Truro
As a guide, budget £410–£1,240 per lintel including VAT for lintel replacement in Truro, based on published UK cost guides adjusted for prices in the South West (+3%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Lintel replacement | £410–£1,240 per lintel | Propping, removing the old lintel, new lintel set on beds and brickwork made good |
| Structural calculations for a beam | £260–£770 | Site measure or photos, beam and padstone design and calculations for building control |
| Temporary works and propping | £150–£520 | Props, spreaders, needles and sole plates for a typical opening, installed and struck |
| Plastering and making good | £310–£1,240 | Boxing the beam, bead and skim, reveals, floor infill where the wall stood and tidy-up |
Figures include our approximate regional adjustment for prices in the South West (+3%) and are rounded. How these figures are worked out.
Building rules for Truro
Structural openings in English homes need building regulations approval before work starts. Cornwall Council can deal with it, or you can use a registered building control approver. Either way the steel is inspected before it is covered, and a completion certificate is issued at the end. Keep it safe for when you sell.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Lintel replacement near Truro
- Falmouth 7.7 mi
- Redruth 7.8 mi
- Newquay 10.4 mi
- Camborne 11.3 mi
- St Austell 13.5 mi
Questions about lintel replacement in Truro
Do you cover Truro for lintel replacement?
Yes. We carry out lintel replacement in Truro and the TR1 postcode districts. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.
Do I need a party wall agreement for lintel replacement in Truro?
Yes, if the beam bears into a shared wall: the Party Wall etc. Act 1996 applies in England and Wales, and a party structure notice must be served at least two months before that work starts. We arrange it through a party wall surveyor.
Why is my concrete lintel cracking and flaking?
Usually because the steel reinforcement inside has rusted. Rust takes up more space than steel, so it pushes the concrete cover off, exposing more steel to damp and speeding up the damage. An engineer checks whether the lintel can still do its job, but in many cases replacement is the sensible fix.
What type of lintel will be fitted?
The engineer decides, based on the opening width, the wall construction and the load above. Steel lintels are common in cavity walls, while solid walls or wide openings may suit a different type or a steel section. We fit what the specification calls for rather than a one-size option.
Will the new brickwork match the old?
We aim for a close match by reusing the original bricks wherever they come out cleanly and sourcing reclaimed or similar bricks for any shortfall. Mortar colour and type are chosen to suit the existing wall. New work can look slightly fresher at first and tends to weather in over time.
Can you work on older or listed homes in Truro?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.