Garage conversion openings · Portsmouth
Garage conversion openings in Portsmouth
Garage conversion openings for homes in PO1, PO2, PO3, designed by a structural engineer.
- Price fixed in writing once scope is agreed
- Building control arranged
- Temporary works and making good included
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Garage conversion openings in Portsmouth: how it works
If you live in Portsmouth, garage conversion openings can usually be planned and priced after a single survey visit. Our coverage runs across Hampshire, so nearby villages are included too. We cover PO1, PO2, PO3, PO4 and PO5, and we fix the price in writing once the layout and scope are agreed.
Converting a garage is a popular way to add a room without extending. Structurally, two things usually happen: the big garage door opening is filled in with a wall, window or door on proper foundations, and a doorway or wider opening is formed through the wall between the garage and the house.
Worth knowing before you start
- Most garage conversions do not need planning permission, but some estates have conditions removing permitted development rights for garages, and listed buildings or flats need consent. Changing the front elevation can also need permission in some areas.
- A converted garage used as a bedroom needs a suitable means of escape, often an escape window, and every habitable room needs ventilation. These affect the size and type of window in the infill wall, so they are agreed before brickwork starts.
- Garages often hold gas meters, consumer units, boilers or water stopcocks. These are located at survey, and anything that needs moving is done by the right trade, including a Gas Safe registered engineer for any work on gas pipework.
- Forming a doorway from the house into the converted garage often goes through a load-bearing wall, especially the original external wall of the house where the garage is attached. That opening needs a lintel or beam designed by the engineer.
- The price depends on whether the garage door beam needs replacing, the foundation needed for the infill, whether a new opening is formed into the house, the brick or cladding finish, and any fire separation work that has to be kept or added.
What happens, step by step
Free visit
A short visit to Portsmouth to see the job, agree what you want and check the bearings, floors and services that affect the design.
Calculations
The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.
Building control
We submit a building notice or full plans application to Portsmouth City Council, so approval is in place before the wall is touched.
Steel in, made good
On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.
How much should I budget in Portsmouth?
As a guide, budget £1,100–£3,350 including VAT for garage door opening infill (structural part) in Portsmouth, based on published UK cost guides adjusted for prices in the South East (+12%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Garage door opening infill (structural part) | £1,100–£3,350 | Beam or lintel checked or replaced, foundation and infill wall for the old door opening (window and finishes extra) |
| Lintel replacement | £450–£1,340 per lintel | Propping, removing the old lintel, new lintel set on beds and brickwork made good |
| Structural calculations for a beam | £280–£840 | Site measure or photos, beam and padstone design and calculations for building control |
| Building control fees | £280–£730 | Building notice or full plans fee and inspections; varies by council or approver |
Figures include our approximate regional adjustment for prices in the South East (+12%) and are rounded. How these figures are worked out.
Building rules for Portsmouth
Structural openings in English homes need building regulations approval before work starts. Portsmouth City Council can deal with it, or you can use a registered building control approver. Either way the steel is inspected before it is covered, and a completion certificate is issued at the end. Keep it safe for when you sell.
If the beam bears into a wall you share with a neighbour, the Party Wall etc. Act 1996 applies, and a party structure notice must be served at least two months before that work starts. We arrange this through a party wall surveyor.
Garage conversion openings near Portsmouth
- Gosport 1.7 mi
- Fareham 5.3 mi
- Havant 6.1 mi
- Waterlooville 6.2 mi
- Chichester 13.8 mi
- Hythe 14.2 mi
Questions about garage conversion openings in Portsmouth
Can you work on older or listed homes in Portsmouth?
Yes. Older homes often have lime mortar, timber lintels or shallow footings, which the engineer allows for. Listed buildings need listed building consent for internal structural changes as well as building regulations approval, and that must be in place first.
How much do garage conversion openings cost in Portsmouth?
As a guide, budget £1,100–£3,350 including VAT for garage door opening infill (structural part) in Portsmouth, based on published UK cost guides adjusted for prices in the South East (+12%). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.
Is my garage floor suitable for a living room?
Rarely as it stands. Garage floors are often lower than the house, may slope towards the door and usually lack insulation and a damp-proof membrane. The floor is normally built up with a membrane, insulation and screed or a timber floor to meet the house level and the building regulations.
Do I need planning permission to convert my garage?
Often not, because a garage conversion is largely internal work within permitted development. However, some newer estates have planning conditions that remove permitted development rights for garages, and listed buildings, flats and some front elevation changes need consent. Check your property's planning history with the council before committing.
Can I knock through from my garage into the kitchen?
Usually, yes. The wall between an attached or integral garage and the house is often load-bearing, so the opening needs a lintel or steel beam designed by a structural engineer and approved by building control. If any of the garage stays as storage, the opening needs fire separation, such as a fire door.
Can I stay at home while the work is done in Portsmouth?
Usually, yes. The work area is screened and floors are protected. The rooms either side of the opening are out of action for a few days, and there is some noise and dust while the masonry comes out.