Steel BeamInstallers
Garage conversion with the old door opening being bricked up around a new window

Garage conversion openings · Atherton

Garage conversion openings in Atherton

Garage conversion openings in Atherton, from free survey to completion certificate.

  • Survey, design and installation in one
  • Covering M29, M46, WN7
  • Inspected before it is covered

Free survey in Atherton

Tell us about the garage conversion opening job in Atherton.

Please enter your name.
Please enter a UK phone number.
Please enter a valid email.
Please enter a UK postcode.
Please tell us a little about the job.
  • Free survey visit
  • Engineer's calculations arranged
  • Building control handled
  • Fixed written price once scope is agreed
  • England, Wales, mainland Scotland & NI

Planning garage conversion openings in Atherton

Garage conversion openings in Atherton are planned around the house, not a standard kit. It sits about 4.8 miles from Bolton, which we also cover. We visit, measure and check what the wall carries, then arrange calculations and building control approval before any steel is ordered.

Converting a garage is a popular way to add a room without extending. Structurally, two things usually happen: the big garage door opening is filled in with a wall, window or door on proper foundations, and a doorway or wider opening is formed through the wall between the garage and the house.

Things to plan for

  • Garages built before 2000 can contain asbestos cement in roof sheets, wall panels or the garage door itself. A survey of the materials being disturbed is needed before work starts, so any asbestos can be removed or managed correctly.
  • The structural part of a garage conversion, covering the infill foundation, the wall and any new opening, typically takes one to two weeks. The full conversion with insulation, electrics, plastering and flooring takes longer, depending on the scope.
  • Once the garage becomes a habitable room, the energy efficiency requirements of the building regulations apply. Walls, floor and roof normally need insulating to current standards, so the structural design and the thermal upgrade are planned together.
  • The beam or lintel over a garage door was designed to span an open gap. It may be timber, concrete or steel, and in older houses it can be undersized or corroded, so the engineer checks it before anything is built underneath or above it.
  • A converted garage used as a bedroom needs a suitable means of escape, often an escape window, and every habitable room needs ventilation. These affect the size and type of window in the infill wall, so they are agreed before brickwork starts.

How the job runs in Atherton

  1. Free visit

    A short visit to Atherton to see the job, agree what you want and check the bearings, floors and services that affect the design.

  2. Calculations

    The engineer's calculations and a simple drawing are prepared for your opening and shared with you before anything is ordered.

  3. Building control

    We submit a building notice or full plans application to Wigan Council, so approval is in place before the wall is touched.

  4. Steel in, made good

    On site we prop, open up, fit and pack the steel, then fire protect, box in and plaster once the inspection is done.

What do garage conversion openings cost in Atherton?

As a guide, budget £960–£2,880 including VAT for garage door opening infill (structural part) in Atherton, based on published UK cost guides adjusted for prices in the North West (-4%).

JobTypical guide rangeWhat it usually covers
Garage door opening infill (structural part)£960–£2,880Beam or lintel checked or replaced, foundation and infill wall for the old door opening (window and finishes extra)
Structural calculations for a beam£240–£720Site measure or photos, beam and padstone design and calculations for building control
Steel beam replacement£1,900–£5,300Propping, removing the failed beam, new steel on proper bearings, approval and making good
Widening an internal doorway£960–£2,400Opening widened with a new lintel or short beam, approval where structural, and making good

Figures include our approximate regional adjustment for prices in the North West (-4%) and are rounded. How these figures are worked out.

Building rules for Atherton

In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either Wigan Council or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.

Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.

Building rules in England

Garage conversion openings near Atherton

Local questions answered

What happens at the survey visit in Atherton?

We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.

Do you cover Atherton for garage conversion openings?

Yes. We carry out garage conversion openings in Atherton and the M29, M46 and WN7 postcode districts. Book a free survey visit and we will check the wall, arrange the engineer's calculations and send an itemised written quote.

Do I need planning permission to convert my garage?

Often not, because a garage conversion is largely internal work within permitted development. However, some newer estates have planning conditions that remove permitted development rights for garages, and listed buildings, flats and some front elevation changes need consent. Check your property's planning history with the council before committing.

What happens to the beam over my garage door?

It is checked by the engineer. Many can stay, carrying the wall above as before, with the infill built underneath. If it is timber that has rotted, a corroded steel section or simply undersized for the loads, it is replaced, with the wall or room above propped while the new steel goes in.

Can I knock through from my garage into the kitchen?

Usually, yes. The wall between an attached or integral garage and the house is often load-bearing, so the opening needs a lintel or steel beam designed by a structural engineer and approved by building control. If any of the garage stays as storage, the opening needs fire separation, such as a fire door.

Planning to take a wall out?

Book a free survey visit. You get an itemised written quote covering calculations, building control, steel and making good.