Garage conversion openings · Devon
Garage conversion openings in Devon
Survey, engineer's design and installation of garage conversion openings anywhere in Devon.
- Price fixed in writing once scope is agreed
- Building control arranged
- Temporary works and making good included
- Free survey visit
- Engineer's calculations arranged
- Building control handled
- Fixed written price once scope is agreed
- England, Wales, mainland Scotland & NI
Planning garage conversion openings in Devon
Garage conversion openings are the structural changes that turn a garage into living space: infilling the garage door opening with a wall and window, and often forming a new opening between the garage and the house. The existing lintel or beam over the garage door is checked, and any new steel is sized by a structural engineer.
Across Devon, garage conversion openings usually come up when people want more light, a better layout or a way through to a new extension. That includes Heavitree, Tiverton and Bideford, plus smaller towns and villages nearby. Whatever the reason, the beam is sized from calculations and the work is inspected before anything is covered.
Key points for your project
- Garage floors often sit lower than the house floor and may have no damp-proof membrane. The infill wall needs a damp-proof course linked to the existing walls, and the floor usually needs a membrane, insulation and screed raised to the house level.
- The price depends on whether the garage door beam needs replacing, the foundation needed for the infill, whether a new opening is formed into the house, the brick or cladding finish, and any fire separation work that has to be kept or added.
- Most garage conversions do not need planning permission, but some estates have conditions removing permitted development rights for garages, and listed buildings or flats need consent. Changing the front elevation can also need permission in some areas.
- The structural part of a garage conversion, covering the infill foundation, the wall and any new opening, typically takes one to two weeks. The full conversion with insulation, electrics, plastering and flooring takes longer, depending on the scope.
- Garages often hold gas meters, consumer units, boilers or water stopcocks. These are located at survey, and anything that needs moving is done by the right trade, including a Gas Safe registered engineer for any work on gas pipework.
How the job runs in Devon
Survey in Devon
We visit, look at the wall and what sits above it, measure the opening and note services, access and how the steel can be brought in.
Engineer's design
A structural engineer sizes the beam, padstones and any posts, and sets out the temporary support needed while the wall is out.
Building control
We submit a building notice or full plans application to the local council's building control team, so approval is in place before the wall is touched.
Install and sign-off
Props go in, the opening is formed, the steel is set and packed, building control inspects it, and we make good.
Guide prices for garage conversion openings in Devon
As a guide, budget £1,050–£3,100 including VAT for garage door opening infill (structural part) in Devon, based on published UK cost guides adjusted for prices in the South West (+3%).
| Job | Typical guide range | What it usually covers |
|---|---|---|
| Garage door opening infill (structural part) | £1,050–£3,100 | Beam or lintel checked or replaced, foundation and infill wall for the old door opening (window and finishes extra) |
| Widening an internal doorway | £1,050–£2,600 | Opening widened with a new lintel or short beam, approval where structural, and making good |
| Building control fees | £260–£670 | Building notice or full plans fee and inspections; varies by council or approver |
| RSJ supply and fit (single beam) | £820–£2,580 per beam | Beam supplied, delivered, lifted and packed on padstones, with propping (calculations and approval priced separately) |
Figures include our approximate regional adjustment for prices in the South West (+3%) and are rounded. How these figures are worked out.
Building control and neighbours in Devon
In England, taking out a load-bearing wall or putting in a beam is building work under the Building Regulations 2010. It needs approval from building control, either the local council's building control team or a registered building control approver, through a full plans application or a building notice. Part A covers the structure and Part B covers fire safety, which is why steel in homes is usually fire protected.
Terraced and semi-detached homes often need party wall notices, because cutting into a shared wall to take a beam end is notifiable under the Party Wall etc. Act 1996. Allow at least two months for the notice period unless your neighbour agrees sooner.
Local questions answered
What happens at the survey visit in Devon?
We look at the wall, the floor and ceiling either side and what sits above, measure the opening you want, and note cables, pipes and access for the steel. It usually takes under an hour and there is no charge.
Which towns in Devon do you cover?
We cover towns including Plymouth, Exeter, Paignton and Torquay, plus the villages and smaller towns around them.
How long do the structural works for a garage conversion take?
Typically one to two weeks for the structural stage: digging and concreting the infill foundation, building the infill wall, and forming any new opening into the house. Building control inspections fit around these stages, and the insulation, electrics, plastering and flooring of the conversion follow on afterwards.
Is my garage floor suitable for a living room?
Rarely as it stands. Garage floors are often lower than the house, may slope towards the door and usually lack insulation and a damp-proof membrane. The floor is normally built up with a membrane, insulation and screed or a timber floor to meet the house level and the building regulations.
What paperwork will I get when the conversion is done?
You should receive the engineer's calculations, a building control completion certificate for the conversion, and certificates for any electrical or gas work. Keep these together, as buyers' solicitors ask for evidence that a garage conversion was approved, especially where a garage has become a bedroom or living space.
Do I need a steel beam for a garage conversion?
Not always. If the existing beam over the garage door is sound and the infill wall sits on its own foundation, new steel may not be needed. Steel is usually required when forming an opening through a load-bearing wall into the house, or when the garage door beam is undersized or corroded. The engineer decides.
How much do garage conversion openings cost in Devon?
As a guide, budget £1,050–£3,100 including VAT for garage door opening infill (structural part) in Devon, based on published UK cost guides adjusted for prices in the South West (+3%). The exact figure depends on the span, what the wall carries, access and the finish, and is fixed in writing once the scope is agreed.